Να το πω απο την αρχή ότι είναι η πρώτη μου επαφη με το θεμα
Εχω το asus my cinema u3000 αλλά δεν μπορώ να δω tv
δοκιμασα με το tvtime αλλα μου λεει οτι δεν βρηκε το /dev/video0
το ιδιο μου λεει και το Zapping.
στον Γουγλη που κοιτξα δεν εβγαλα ακρη.
Αλλοι λενε οτι παιζει κατευθειαν αλλοι οτι χρειαζεται drivers.
Αν μπορει καποιος να βοηθησει;;
Διανομη linux mint 9
kernel: 2.6.32-21-generic
Φόρουμ
Δώσε αστέρια!
- Συνδεθείτε ή εγγραφείτε για να σχολιάσετε
Σχόλια
Καμια ιδεα κανεις;;;
In a world without walls and fenches who needs Windows and Gates?
δεν εχω ασχολιθει με το θεμα,αλλα δοκιμασε μια και MythTV,μπορεις να το βρεις στο synaptic.
I'm never gonna work another day in my life
The gods told me to relax
http://killingtimegr.blogspot.com
Δοκιμασες τον vlc; εγω δεν τον δοκιμασα -δεν εχω καρτα τηλεορασης- αλλα εχει επιλογη στο Πολυμεσα>Ανοιγμα συσκευης συλληψης η αλλιως ctrl+c
Δωσε και τα αποτελεσματα απο
και πες μας, και τι εχεις δοκιμασει μεχρι τωρα, για να δουλεψει, παραδειγμα αν εχεις κανει καποιον οδηγο εγκατασταση ή κατι αλλο!
Βάλτε κάνα χεράκι να το κάνουμε ρε παιδιά
δεν εχω κάνει τιποτα ακόμα εχω φρεσκοεγκατεστημενο το mint 9
lsusb
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 046d:c52e Logitech, Inc.
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0b05:1736 ASUSTek Computer, Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
dmesg
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xe07f0000 - 0xff7fe000 ( 496 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
[ 0.000000] .init : 0xc07a3000 - 0xc0847000 ( 656 kB)
[ 0.000000] .data : 0xc0590613 - 0xc07a2e48 (2122 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0590613 (4673 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:256
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1792.645 MHz processor.
[ 0.004008] Calibrating delay loop (skipped), value calculated using timer frequency.. 3585.29 BogoMIPS (lpj=7170580)
[ 0.004046] Security Framework initialized
[ 0.004095] AppArmor: AppArmor initialized
[ 0.004112] Mount-cache hash table entries: 512
[ 0.004399] Initializing cgroup subsys ns
[ 0.004412] Initializing cgroup subsys cpuacct
[ 0.004421] Initializing cgroup subsys memory
[ 0.004440] Initializing cgroup subsys devices
[ 0.004446] Initializing cgroup subsys freezer
[ 0.004451] Initializing cgroup subsys net_cls
[ 0.004501] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 0.004508] CPU: L2 cache: 256K
[ 0.004513] CPU: Hyper-Threading is disabled
[ 0.004522] mce: CPU supports 4 MCE banks
[ 0.004560] Performance Events: no PMU driver, software events only.
[ 0.004576] Checking 'hlt' instruction... OK.
[ 0.021576] SMP alternatives: switching to UP code
[ 0.039015] Freeing SMP alternatives: 19k freed
[ 0.039071] ACPI: Core revision 20090903
[ 0.050383] ACPI: setting ELCR to 0200 (from 0820)
[ 0.051375] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.051391] ftrace: allocating 21771 entries in 43 pages
[ 0.056220] Enabling APIC mode: Flat. Using 0 I/O APICs
[ 0.056230] weird, boot CPU (#0) not listed by the BIOS.
[ 0.056234] SMP motherboard not detected.
[ 0.056239] Local APIC not detected. Using dummy APIC emulation.
[ 0.056243] SMP disabled
[ 0.056685] Brought up 1 CPUs
[ 0.056693] Total of 1 processors activated (3585.29 BogoMIPS).
[ 0.057068] CPU0 attaching NULL sched-domain.
[ 0.057406] devtmpfs: initialized
[ 0.058212] regulator: core version 0.5
[ 0.058255] Time: 19:43:47 Date: 05/09/11
[ 0.058367] NET: Registered protocol family 16
[ 0.058627] EISA bus registered
[ 0.058657] ACPI: bus type pci registered
[ 0.062946] PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=2
[ 0.062951] PCI: Using configuration type 1 for base access
[ 0.065174] bio: create slab <bio-0> at 0
[ 0.066139] ACPI: EC: Look up EC in DSDT
[ 0.075339] ACPI: Interpreter enabled
[ 0.075354] ACPI: (supports S0 S1 S4 S5)
[ 0.075395] ACPI: Using PIC for interrupt routing
[ 0.084185] ACPI: Power Resource [URP1] (off)
[ 0.084245] ACPI: Power Resource [URP2] (off)
[ 0.084300] ACPI: Power Resource [FDDP] (off)
[ 0.084356] ACPI: Power Resource [LPTP] (off)
[ 0.084594] ACPI: No dock devices found.
[ 0.085339] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.085446] pci 0000:00:00.0: reg 10 32bit mmio: [0xe0000000-0xe3ffffff]
[ 0.085659] pci 0000:00:02.0: Enabling SiS 96x SMBus
[ 0.085729] pci 0000:00:02.1: reg 20 io port: [0xc00-0xc1f]
[ 0.085816] pci 0000:00:02.5: reg 20 io port: [0xff00-0xff0f]
[ 0.085890] pci 0000:00:02.7: reg 10 io port: [0xdc00-0xdcff]
[ 0.085902] pci 0000:00:02.7: reg 14 io port: [0xd800-0xd87f]
[ 0.085965] pci 0000:00:02.7: supports D1 D2
[ 0.085969] pci 0000:00:02.7: PME# supported from D3hot D3cold
[ 0.085977] pci 0000:00:02.7: PME# disabled
[ 0.086024] pci 0000:00:03.0: reg 10 32bit mmio: [0xdfffc000-0xdfffcfff]
[ 0.086105] pci 0000:00:03.1: reg 10 32bit mmio: [0xdfffd000-0xdfffdfff]
[ 0.086186] pci 0000:00:03.2: reg 10 32bit mmio: [0xdfffe000-0xdfffefff]
[ 0.086282] pci 0000:00:03.3: reg 10 32bit mmio: [0xdffff000-0xdfffffff]
[ 0.086349] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
[ 0.086356] pci 0000:00:03.3: PME# disabled
[ 0.086418] pci 0000:00:04.0: reg 10 io port: [0xd400-0xd4ff]
[ 0.086429] pci 0000:00:04.0: reg 14 32bit mmio: [0xdfffb000-0xdfffbfff]
[ 0.086468] pci 0000:00:04.0: reg 30 32bit mmio pref: [0xdffc0000-0xdffdffff]
[ 0.086497] pci 0000:00:04.0: supports D1 D2
[ 0.086501] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.086508] pci 0000:00:04.0: PME# disabled
[ 0.086570] pci 0000:00:09.0: reg 10 32bit mmio: [0xdfff0000-0xdfff7fff]
[ 0.086748] pci 0000:01:00.0: reg 10 32bit mmio: [0xde000000-0xdeffffff]
[ 0.086759] pci 0000:01:00.0: reg 14 32bit mmio pref: [0xd0000000-0xd7ffffff]
[ 0.086790] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xdfee0000-0xdfefffff]
[ 0.086878] pci 0000:00:01.0: bridge 32bit mmio: [0xddd00000-0xdfefffff]
[ 0.086886] pci 0000:00:01.0: bridge 32bit mmio pref: [0xcda00000-0xddbfffff]
[ 0.086900] pci_bus 0000:00: on NUMA node 0
[ 0.086909] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.090179] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 0.090380] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 *11 12 14 15)
[ 0.090572] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 *11 12 14 15)
[ 0.090760] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 *11 12 14 15)
[ 0.090951] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 *11 12 14 15)
[ 0.091152] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 *11 12 14 15)
[ 0.091340] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 *11 12 14 15)
[ 0.091532] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 0.091794] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.091801] vgaarb: loaded
[ 0.092133] SCSI subsystem initialized
[ 0.092314] libata version 3.00 loaded.
[ 0.092510] usbcore: registered new interface driver usbfs
[ 0.092538] usbcore: registered new interface driver hub
[ 0.092605] usbcore: registered new device driver usb
[ 0.092980] ACPI: WMI: Mapper loaded
[ 0.092986] PCI: Using ACPI for IRQ routing
[ 0.093315] NetLabel: Initializing
[ 0.093320] NetLabel: domain hash size = 128
[ 0.093323] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.093356] NetLabel: unlabeled traffic allowed by default
[ 0.093457] Switching to clocksource tsc
[ 0.096034] AppArmor: AppArmor Filesystem Enabled
[ 0.096091] pnp: PnP ACPI init
[ 0.096140] ACPI: bus type pnp registered
[ 0.102594] pnp: PnP ACPI: found 11 devices
[ 0.102602] ACPI: ACPI bus type pnp unregistered
[ 0.102610] PnPBIOS: Disabled by ACPI PNP
[ 0.137577] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.137583] pci 0000:00:01.0: IO window: disabled
[ 0.137593] pci 0000:00:01.0: MEM window: 0xddd00000-0xdfefffff
[ 0.137601] pci 0000:00:01.0: PREFETCH window: 0xcda00000-0xddbfffff
[ 0.137631] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.137636] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.137642] pci_bus 0000:01: resource 1 mem: [0xddd00000-0xdfefffff]
[ 0.137647] pci_bus 0000:01: resource 2 pref mem [0xcda00000-0xddbfffff]
[ 0.137726] NET: Registered protocol family 2
[ 0.137919] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.138537] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.138670] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.138812] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.138829] TCP reno registered
[ 0.139134] NET: Registered protocol family 1
[ 1.722602] pci 0000:01:00.0: Boot video device
[ 1.722935] cpufreq-nforce2: No nForce2 chipset.
[ 1.722988] Scanning for low memory corruption every 60 seconds
[ 1.723230] audit: initializing netlink socket (disabled)
[ 1.723259] type=2000 audit(1304970228.722:1): initialized
[ 1.735763] Trying to unpack rootfs image as initramfs...
[ 1.750946] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.753928] VFS: Disk quotas dquot_6.5.2
[ 1.754071] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.758831] fuse init (API version 7.13)
[ 1.759103] msgmni has been set to 967
[ 1.762678] alg: No test for stdrng (krng)
[ 1.762953] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.762962] io scheduler noop registered
[ 1.762967] io scheduler anticipatory registered
[ 1.762971] io scheduler deadline registered
[ 1.763055] io scheduler cfq registered (default)
[ 1.763283] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.763333] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.763530] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.763539] ACPI: Power Button [PWRB]
[ 1.763660] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 1.763675] ACPI: Sleep Button [SLPB]
[ 1.763762] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.763768] ACPI: Power Button [PWRF]
[ 1.764105] processor LNXCPU:00: registered as cooling_device0
[ 1.773450] isapnp: Scanning for PnP cards...
[ 1.783610] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.783789] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.783984] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.784579] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.784857] 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.835006] brd: module loaded
[ 1.835988] loop: module loaded
[ 1.836252] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 1.836557] pata_sis 0000:00:02.5: version 0.5.2
[ 1.838678] scsi0 : pata_sis
[ 1.839027] scsi1 : pata_sis
[ 1.840189] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 1.840196] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 1.840974] Fixed MDIO Bus: probed
[ 1.841051] PPP generic driver version 2.4.2
[ 1.841212] tun: Universal TUN/TAP device driver, 1.6
[ 1.841218] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[ 1.841438] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.841809] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5
[ 1.841817] PCI: setting IRQ 5 as level-triggered
[ 1.841825] ehci_hcd 0000:00:03.3: PCI INT D -> Link[LNKH] -> GSI 5 (level, low) -> IRQ 5
[ 1.841863] ehci_hcd 0000:00:03.3: EHCI Host Controller
[ 1.841993] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
[ 1.842064] ehci_hcd 0000:00:03.3: cache line size of 128 is not supported
[ 1.842088] ehci_hcd 0000:00:03.3: irq 5, io mem 0xdffff000
[ 1.851112] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00
[ 1.851448] usb usb1: configuration #1 chosen from 1 choice
[ 1.851520] hub 1-0:1.0: USB hub found
[ 1.851550] hub 1-0:1.0: 6 ports detected
[ 1.851689] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.852057] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
[ 1.852064] PCI: setting IRQ 11 as level-triggered
[ 1.852072] ohci_hcd 0000:00:03.0: PCI INT A -> Link[LNKE] -> GSI 11 (level, low) -> IRQ 11
[ 1.852111] ohci_hcd 0000:00:03.0: OHCI Host Controller
[ 1.852275] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
[ 1.852321] ohci_hcd 0000:00:03.0: irq 11, io mem 0xdfffc000
[ 1.929163] usb usb2: configuration #1 chosen from 1 choice
[ 1.929234] hub 2-0:1.0: USB hub found
[ 1.929260] hub 2-0:1.0: 2 ports detected
[ 1.929698] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
[ 1.929708] ohci_hcd 0000:00:03.1: PCI INT B -> Link[LNKF] -> GSI 11 (level, low) -> IRQ 11
[ 1.929744] ohci_hcd 0000:00:03.1: OHCI Host Controller
[ 1.929910] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
[ 1.929950] ohci_hcd 0000:00:03.1: irq 11, io mem 0xdfffd000
[ 2.020572] usb usb3: configuration #1 chosen from 1 choice
[ 2.020652] hub 3-0:1.0: USB hub found
[ 2.020679] hub 3-0:1.0: 2 ports detected
[ 2.021106] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11
[ 2.021115] ohci_hcd 0000:00:03.2: PCI INT C -> Link[LNKG] -> GSI 11 (level, low) -> IRQ 11
[ 2.021153] ohci_hcd 0000:00:03.2: OHCI Host Controller
[ 2.021306] ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4
[ 2.021354] ohci_hcd 0000:00:03.2: irq 11, io mem 0xdfffe000
[ 2.047271] ata1.00: ATA-8: WDC WD3200AAJB-00J3A0, 01.03E01, max UDMA/133
[ 2.047280] ata1.00: 625142448 sectors, multi 16: LBA48
[ 2.047355] ata1.01: ATAPI: HL-DT-ST DVDRAM GSA-4167B, DL11, max UDMA/33
[ 2.064081] ata1.00: configured for UDMA/133
[ 2.116969] usb usb4: configuration #1 chosen from 1 choice
[ 2.117048] hub 4-0:1.0: USB hub found
[ 2.117076] hub 4-0:1.0: 2 ports detected
[ 2.117193] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.117398] PNP: No PS/2 controller found. Probing ports directly.
[ 2.150752] ata1.01: configured for UDMA/33
[ 2.183074] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.183487] mice: PS/2 mouse device common for all mice
[ 2.183824] rtc_cmos 00:02: RTC can wake from S4
[ 2.183954] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 2.183989] rtc0: alarms up to one month, 114 bytes nvram
[ 2.184247] device-mapper: uevent: version 1.0.3
[ 2.187063] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: [email protected]
[ 2.190739] device-mapper: multipath: version 1.1.0 loaded
[ 2.190750] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.191200] EISA: Probing bus 0 at eisa.0
[ 2.191248] EISA: Detected 0 cards.
[ 2.238788] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 2.238884] cpuidle: using governor ladder
[ 2.238889] cpuidle: using governor menu
[ 2.239992] TCP cubic registered
[ 2.240273] NET: Registered protocol family 10
[ 2.241229] lo: Disabled Privacy Extensions
[ 2.241829] NET: Registered protocol family 17
[ 2.241975] Using IPI No-Shortcut mode
[ 2.242223] PM: Resume from disk failed.
[ 2.242268] registered taskstats version 1
[ 2.242650] Magic number: 11:369:748
[ 2.242861] rtc_cmos 00:02: setting system clock to 2011-05-09 19:43:50 UTC (1304970230)
[ 2.242868] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.242872] EDD information not available.
[ 2.438225] usb 1-1: configuration #1 chosen from 1 choice
[ 2.502986] isapnp: No Plug & Play device found
[ 2.503387] scsi 0:0:0:0: Direct-Access ATA WDC WD3200AAJB-0 01.0 PQ: 0 ANSI: 5
[ 2.503770] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.508932] scsi 0:0:1:0: CD-ROM HL-DT-ST DVDRAM GSA-4167B DL11 PQ: 0 ANSI: 5
[ 2.527669] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.527681] Uniform CD-ROM driver Revision: 3.20
[ 2.527992] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 2.528164] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 2.528580] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 2.528693] sd 0:0:0:0: [sda] Write Protect is off
[ 2.528699] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.528750] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.529128] sda: sda1 sda2 sda3 sda4
[ 2.551304] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.559047] hub 1-0:1.0: over-current change on port 3
[ 2.608737] hub 1-0:1.0: over-current change on port 4
[ 2.712130] hub 1-0:1.0: over-current change on port 5
[ 2.863934] Freeing initrd memory: 13392k freed
[ 2.893212] Freeing unused kernel memory: 656k freed
[ 2.894785] Write protecting the kernel text: 4676k
[ 2.894849] Write protecting the kernel read-only data: 1840k
[ 2.955269] udev: starting version 151
[ 3.132304] usb 3-1: new full speed USB device using ohci_hcd and address 2
[ 3.329538] Floppy drive(s): fd0 is 1.44M
[ 3.354311] FDC 0 is a post-1991 82077
[ 3.360714] usb 3-1: configuration #1 chosen from 1 choice
[ 3.472283] Linux agpgart interface v0.103
[ 3.501912] sis900.c: v1.08.10 Apr. 2 2006
[ 3.503189] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 3.503203] sis900 0000:00:04.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 3.504611] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
[ 3.518537] 0000:00:04.0: Using transceiver found at address 1 as default
[ 3.628991] usbcore: registered new interface driver hiddev
[ 3.635386] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:03.1/usb3/3-1/3-1:1.0/input/input4
[ 3.636724] generic-usb 0003:046D:C52E.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:03.1-1/input0
[ 3.639275] eth0: SiS 900 PCI Fast Ethernet at 0xd400, IRQ 11, 00:0a:e6:5b:05:2f
[ 3.644219] agpgart-sis 0000:00:00.0: SiS chipset [1039/0646]
[ 3.696614] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:03.1/usb3/3-1/3-1:1.1/input/input5
[ 3.701613] generic-usb 0003:046D:C52E.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:03.1-1/input1
[ 3.701707] usbcore: registered new interface driver usbhid
[ 3.702258] usbhid: v2.6:USB HID core driver
[ 3.703175] agpgart-sis 0000:00:00.0: AGP aperture is 64M @ 0xe0000000
[ 3.710262] [drm] Initialized drm 1.1.0 20060810
[ 3.792996] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
[ 3.793007] nouveau 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5
[ 3.799452] [drm] nouveau 0000:01:00.0: Detected an NV30 generation card (0x436200a1)
[ 3.799622] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PROM
[ 3.932787] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 3.932970] [drm] nouveau 0000:01:00.0: BMP BIOS found
[ 3.932975] [drm] nouveau 0000:01:00.0: BMP version 5.40
[ 3.932981] [drm] nouveau 0000:01:00.0: Bios version 04.36.20.25
[ 3.932987] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 2.2
[ 3.932995] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000300 00009c40
[ 3.933002] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02010310 00009c40
[ 3.933007] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 01010312 00000000
[ 3.933011] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02020321 00000303
[ 3.933155] [drm] nouveau 0000:01:00.0: Loading NV17 power sequencing microcode
[ 3.933161] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xF052
[ 3.933216] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xF516
[ 3.934405] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xF78F
[ 3.934454] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xF902
[ 3.934545] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xF91F
[ 3.934636] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0xF93C
[ 3.940077] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 6 at offset 0xF9C5
[ 3.950645] [TTM] Zone kernel: Available graphics memory: 254622 kiB.
[ 3.950673] [drm] nouveau 0000:01:00.0: 128 MiB VRAM
[ 3.950776] agpgart-sis 0000:00:00.0: AGP 2.0 bridge
[ 3.950809] agpgart-sis 0000:00:00.0: putting AGP V2 device into 4x mode
[ 3.950873] nouveau 0000:01:00.0: putting AGP V2 device into 4x mode
[ 3.950881] [drm] nouveau 0000:01:00.0: 64 MiB GART (aperture)
[ 3.951185] [drm] nouveau 0000:01:00.0: Allocating FIFO number 0
[ 3.952319] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 0
[ 3.952336] [drm] nouveau 0000:01:00.0: Initial CRTC_OWNER is 0
[ 3.952346] [drm] nouveau 0000:01:00.0: Saving VGA fonts
[ 3.994613] [drm] nouveau 0000:01:00.0: Detected a VGA connector
[ 3.995050] [drm] nouveau 0000:01:00.0: Detected a DVI-I connector
[ 3.995336] [drm] nouveau 0000:01:00.0: Detected a TV connector
[ 3.996731] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[ 3.996739] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1)
[ 3.996745] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 2)
[ 3.996752] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3)
[ 4.184376] [drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x49000, bo d7475800
[ 4.184798] fb0: nouveaufb frame buffer device
[ 4.184805] registered panic notifier
[ 4.184822] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0
[ 4.191373] vga16fb: initializing
[ 4.191388] vga16fb: mapped to 0xc00a0000
[ 4.191399] vga16fb: not registering due to another framebuffer present
[ 4.226825] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[ 4.226835] [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output A
[ 4.232587] Console: switching to colour frame buffer device 160x64
[ 4.781611] xor: automatically using best checksumming function: pIII_sse
[ 4.800028] pIII_sse : 2298.000 MB/sec
[ 4.800033] xor: using function: pIII_sse (2298.000 MB/sec)
[ 4.807622] device-mapper: dm-raid45: initialized v0.2594b
[ 5.050864] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[ 5.050875] EXT4-fs (sda1): write access will be enabled during recovery
[ 7.290156] EXT4-fs (sda1): orphan cleanup on readonly fs
[ 7.290184] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 130545
[ 7.290354] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 267402
[ 7.290440] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 267398
[ 7.290475] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 267393
[ 7.290505] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 267389
[ 7.290536] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 267385
[ 7.290565] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 267383
[ 7.290597] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 267372
[ 7.290685] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 262974
[ 7.290717] EXT4-fs (sda1): 9 orphan inodes deleted
[ 7.290725] EXT4-fs (sda1): recovery complete
[ 7.563394] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 8.780676] Adding 1535992k swap on /dev/sda3. Priority:-1 extents:1 across:1535992k
[ 9.161982] udev: starting version 151
[ 9.434828] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00
[ 9.434842] ACPI: resource 0000:00:02.1 [0xc00-0xc1f] conflicts with ACPI region SMRG [0xc00-0xc1f]
[ 9.434847] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.497667] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 10.426710] cfg80211: Calling CRDA to update world regulatory domain
[ 10.671493] parport_pc 00:08: reported by Plug and Play ACPI
[ 10.671608] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 10.693642] lp: driver loaded but no devices found
[ 10.764564] lp0: using parport0 (interrupt-driven).
[ 10.829535] ppdev: user-space parallel port driver
[ 11.009578] gameport: NS558 PnP Gameport is pnp00:09/gameport0, io 0x201, speed 547kHz
[ 11.086001] cfg80211: World regulatory domain updated:
[ 11.086012] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 11.086019] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.086024] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 11.086030] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 11.086035] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.086041] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.622332] dib0700: loaded with support for 13 different device-types
[ 11.627769] dvb-usb: found a 'Asus My Cinema-U3000Hybrid' in cold state, will try to load a firmware
[ 11.627788] usb 1-1: firmware: requesting dvb-usb-dib0700-1.20.fw
[ 11.662609] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 11.662621] rt61pci 0000:00:09.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 11.685079] EXT4-fs (sda2): mounted filesystem with ordered data mode
[ 11.723735] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
[ 11.902097] phy0: Selected rate control algorithm 'minstrel'
[ 11.903595] Registered led device: rt61pci-phy0::radio
[ 11.903628] Registered led device: rt61pci-phy0::assoc
[ 12.017412] dib0700: firmware started successfully.
[ 12.520097] dvb-usb: found a 'Asus My Cinema-U3000Hybrid' in warm state.
[ 12.520242] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 12.523686] DVB: registering new adapter (Asus My Cinema-U3000Hybrid)
[ 12.589185] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 12.589197] Intel ICH 0000:00:02.7: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 12.806297] DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
[ 12.924093] intel8x0_measure_ac97_clock: measured 54339 usecs (2613 samples)
[ 12.924102] intel8x0: clocking to 48000
[ 12.971068] xc2028 3-0061: creating new instance
[ 12.971077] xc2028 3-0061: type set to XCeive xc2028/xc3028 tuner
[ 12.971298] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:03.3/usb1/1-1/input/input6
[ 12.971468] dvb-usb: schedule remote query interval to 50 msecs.
[ 12.971480] dvb-usb: Asus My Cinema-U3000Hybrid successfully initialized and connected.
[ 12.972977] usbcore: registered new interface driver dvb_usb_dib0700
[ 15.404363] eth0: Media Link Off
[ 15.404566] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.426338] rt61pci 0000:00:09.0: firmware: requesting rt2561s.bin
[ 15.501757] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 17.400285] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
[ 17.401420] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
[ 17.554491] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[ 17.574641] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[ 17.574650] [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output A
[ 23.336391] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[ 23.372757] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[ 23.372769] [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output A
[ 27.813336] wlan0: deauthenticating from 00:0c:42:61:5b:10 by local choice (reason=3)
[ 27.824143] wlan0: direct probe to AP 00:0c:42:61:5b:10 (try 1)
[ 27.826301] wlan0: direct probe responded
[ 27.826314] wlan0: authenticate with AP 00:0c:42:61:5b:10 (try 1)
[ 27.828492] wlan0: authenticated
[ 27.864841] wlan0: associate with AP 00:0c:42:61:5b:10 (try 1)
[ 27.880129] wlan0: RX AssocResp from 00:0c:42:61:5b:10 (capab=0x421 status=0 aid=1)
[ 27.880138] wlan0: associated
[ 27.881232] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 38.488079] wlan0: no IPv6 routers present
lsmod
Module Size Used by
binfmt_misc 6587 1
dm_crypt 11331 0
tuner_xc2028 19769 1
snd_wavefront 33066 0
snd_cs4236 25514 0
snd_wss_lib 23410 2 snd_wavefront,snd_cs4236
snd_intel8x0 25588 2
snd_opl3_lib 8966 2 snd_wavefront,snd_cs4236
snd_ac97_codec 100646 1 snd_intel8x0
ac97_bus 1002 1 snd_ac97_codec
snd_hwdep 5412 2 snd_wavefront,snd_opl3_lib
snd_pcm_oss 35308 0
snd_mixer_oss 13746 1 snd_pcm_oss
snd_pcm 70662 5 snd_cs4236,snd_wss_lib,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_mpu401 5123 0
snd_mpu401_uart 5617 3 snd_wavefront,snd_cs4236,snd_mpu401
snd_seq_dummy 1338 0
arc4 1153 2
snd_seq_oss 26726 0
snd_seq_midi 4557 0
snd_rawmidi 19056 3 snd_wavefront,snd_mpu401_uart,snd_seq_midi
rt61pci 18920 0
crc_itu_t 1371 1 rt61pci
snd_seq_midi_event 6003 2 snd_seq_oss,snd_seq_midi
dvb_usb_dib0700 48031 0
rt2x00pci 5995 1 rt61pci
snd_seq 47263 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
dib7000p 15988 2 dvb_usb_dib0700
rt2x00lib 27509 2 rt61pci,rt2x00pci
dib7000m 13943 1 dvb_usb_dib0700
dib0070 7653 1 dvb_usb_dib0700
snd_timer 19098 4 snd_wss_lib,snd_opl3_lib,snd_pcm,snd_seq
dvb_usb 14457 1 dvb_usb_dib0700
led_class 2864 1 rt2x00lib
dib3000mc 11197 1 dvb_usb_dib0700
snd_seq_device 5700 6 snd_opl3_lib,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
dib8000 24119 1 dvb_usb_dib0700
mac80211 204922 2 rt2x00pci,rt2x00lib
dibx000_common 2974 4 dib7000p,dib7000m,dib3000mc,dib8000
ns558 3056 0
ppdev 5259 0
gameport 9089 2 ns558
snd 54148 21 snd_wavefront,snd_cs4236,snd_wss_lib,snd_intel8x0,snd_opl3_lib,snd_ac97_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_mpu401,snd_mpu401_uart,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
parport_pc 25962 1
lp 7028 0
dvb_core 86142 3 dib7000p,dvb_usb,dib8000
joydev 8708 0
cfg80211 126485 2 rt2x00lib,mac80211
eeprom_93cx6 1333 1 rt61pci
serio_raw 3978 0
soundcore 6620 1 snd
parport 32635 3 ppdev,parport_pc,lp
shpchp 28820 0
snd_page_alloc 7076 3 snd_wss_lib,snd_intel8x0,snd_pcm
i2c_sis96x 3024 0
dm_raid45 81647 0
xor 15028 1 dm_raid45
fbcon 35102 71
tileblit 2031 1 fbcon
font 7557 1 fbcon
bitblit 4707 1 fbcon
softcursor 1189 1 bitblit
vga16fb 11385 0
vgastate 8961 1 vga16fb
nouveau 467048 2
ttm 49943 1 nouveau
drm_kms_helper 29297 1 nouveau
drm 162471 4 nouveau,ttm,drm_kms_helper
sis_agp 4047 1
usbhid 36110 0
hid 67032 1 usbhid
sis900 17048 0
mii 4381 1 sis900
i2c_algo_bit 5028 1 nouveau
agpgart 31724 3 ttm,drm,sis_agp
floppy 53016 0
Βρήκα αυτό http://www.linuxtv.org/wiki/index.php/ASUS_My_Cinema-U3000_Mini αλλά αναφέρεται στο u3000 mini με usb id διαφορετικό
από το δικό μου
και αυτό http://forum.ubuntu-gr.org/viewtopic.php?f=16&t=2000&p=19004&hilit=u3000#p18992
αλλά λεει κάτι για patche και δεν το κατέχω το άθλημα
Επίσης καποιος κάπου ανέφερε οτι σε mandriva 2008 δουλευει out of the box
telis@desktopi ~ $ xawtv
This is xawtv-3.95.dfsg.1, running on Linux/i686 (2.6.32-21-generic)
xinerama 0: 1024x768+0+0
can't open /dev/video0: No such file or directory
v4l-conf had some trouble, trying to continue anyway
v4l2: open /dev/video0: No such file or directory
v4l2: open /dev/video0: No such file or directory
v4l: open /dev/video0: No such file or directory
no video grabber device available
telis@desktopi ~ $ xawtv -c /dev/dvb/adapter0/demux0
This is xawtv-3.95.dfsg.1, running on Linux/i686 (2.6.32-21-generic)
xinerama 0: 1024x768+0+0
/dev/dvb/adapter0/demux0: wrong device
v4l-conf had some trouble, trying to continue anyway
libv4l2: error getting capabilities: Invalid argument
no video grabber device available
to /dev/adapter/dvb/demux0 ή dvr0 ή fronted0 ή net0
δημιουργητε μολισ συνδέσω την συσκευή
Κανονικα θα επρεπε να λειτουργει http://www.linuxtv.org/wiki/index.php/DVB-T_USB_Devices
Φανταζομαι θα το εχεις κανει αυτο Εγκατασταση codec στο Ubuntu (για να παιζουν τα παντα)
Δοκιμασε και με αυτο το firmware dvb-usb-dib0700-1.10.fw
Μια αλλη δοκιμη, θα ηταν να δεις αν συμβαινει το ιδιο με νεοτερη εκδοση πυρηνα!
Αναφέρετε στην u3000 mini η δικια μου δεν ειναι η mini
Το δοκίμασα αλλά δεν δούλεψε
telis@desktopi ~ $ xawtv
This is xawtv-3.95.dfsg.1, running on Linux/i686 (2.6.32-21-generic)
xinerama 0: 1024x768+0+0
can't open /dev/video0: No such file or directory
v4l-conf had some trouble, trying to continue anyway
v4l2: open /dev/video0: No such file or directory
v4l2: open /dev/video0: No such file or directory
v4l: open /dev/video0: No such file or directory
telis@desktopi ~ $ xawtv -c /dev/dvb/adapter0/demux0
This is xawtv-3.95.dfsg.1, running on Linux/i686 (2.6.32-21-generic)
xinerama 0: 1024x768+0+0
/dev/dvb/adapter0/demux0: wrong device
v4l-conf had some trouble, trying to continue anyway
libv4l2: error getting capabilities: Invalid argument
no video grabber device available
Το κατέβασα τι το κάνω τωρά;
Μετακινησε το dvb-usb-dib0700-1.10.fw στον φακελο /lib/firmware
κανε επανεκκινηση, και δες αν θα ειναι ενταξει!
Επισης, κανε εγκατασταση το tvtime και δοκιμασε και με αυτο!
Τζίφος φίλε
Δοκίμασα το tv time και μου έλεγε οτι δεν εχει δικαιώματα στον /home/telis/.tvtime
Ετσι έκανα αυτό
telis@desktopi ~ $ sudo chown telis /home/telis/.tvtime
[sudo] password for telis:
Αλλα πάλι τίποτα
telis@desktopi ~ $ tvtime
Running tvtime 1.0.2.
Reading configuration from /etc/tvtime/tvtime.xml
I/O warning : failed to load external entity "/home/telis/.tvtime/tvtime.xml"
videoinput: Cannot open capture device /dev/video0: No such file or directory
Segmentation fault
telis@desktopi ~ $ tvtime -d /dev/dvb/adapter0/demux0
Running tvtime 1.0.2.
Reading configuration from /etc/tvtime/tvtime.xml
Reading configuration from /home/telis/.tvtime/tvtime.xml
videoinput: /dev/dvb/adapter0/demux0 is not a video4linux device.
Segmentation fault
Σβησε το φακελο .tvtime που βρισκετε /home/telis/.tvtime
ανοιξε παλι το tvtime απο τερματικο, και εχεις καποιο σφαλμα, δωσε το αποτελεσμα!
telis@desktopi ~ $ tvtime
Running tvtime 1.0.2.
Reading configuration from /etc/tvtime/tvtime.xml
I/O warning : failed to load external entity "/home/telis/.tvtime/tvtime.xml"
videoinput: Cannot open capture device /dev/video0: No such file or directory
Segmentation fault
telis@desktopi ~ $ tvtime -d /dev/dvb/adapter0/demux0
Running tvtime 1.0.2.
Reading configuration from /etc/tvtime/tvtime.xml
Reading configuration from /home/telis/.tvtime/tvtime.xml
videoinput: /dev/dvb/adapter0/demux0 is not a video4linux device.
Segmentation fault
Δοκιμασε αυτο εδω http://ubuntuforums.org/showpost.php?p=1492635&postcount=2
και αυτο εδω https://bugs.launchpad.net/ubuntu/+source/tvtime/+bug/92752