Καλησπέρα, έχω ένα compaq 2710p που έχει ενσωματωμένη την κάρτα MC8775 της Sierra για 3G internet. Έχω κάνει ότι γνωρίζω και δεν μπορώ να την δω με τίποτα. Έχω ubuntu. Έχω δοκιμάσει και άλλες διανομές. Στην μόνη που τη είδα για λίγο ήταν στο openSUSE που υπήρχε στο dmesg της εγκατάστασης αλλά μετά χάθηκε. Η κάρτα SIM είναι ενεργοποιημένη. Σε πολλά forum λέγανε να αλλάξω το vendorID και productID στο modprobe. To έκανα. Μάλιστα το άλλαξα και μες στο κώδικα του driver αλλά τζίφος. Δεν δημιουργείτε το /dev/ttyUSB0 που θα έπρεπε. Επίσης δεν την εντοπίζω ούτε στο lspci ούτε στο lsusb!
lsusb:
Bus 007 Device 004: ID 04f2:b017 Chicony Electronics Co., Ltd
Bus 007 Device 001: ID 0000:0000
Bus 006 Device 001: ID 0000:0000
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 004: ID 08ff:2580 AuthenTec, Inc.
Bus 003 Device 003: ID 045e:007d Microsoft Corp. Notebook Optical Mouse
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 003: ID 03f0:171d Hewlett-Packard
Bus 001 Device 001: ID 0000:0000
The ID 03f0:171d Hewlett-Packard is teh bluetooth and WLAN intergrated module
lspci:
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c)
00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c)
00:03.0 Communication controller: Intel Corporation Mobile PM965/GM965 MEI Controller (rev 0c)
00:03.2 IDE interface: Intel Corporation Mobile PM965/GM965 PT IDER Controller (rev 0c)
00:03.3 Serial controller: Intel Corporation Mobile PM965/GM965 KT Controller (rev 0c)
00:19.0 Ethernet controller: Intel Corporation 82566MM Gigabit Network Connection (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HBM (ICH8M-E) LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
02:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
02:09.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
02:09.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev ff)
10:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN Network Connection (rev 61)
dmesg:
Code:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.24-18-generic (buildd@king) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed May 28 19:28:38 UTC 2008 (Ubuntu 2.6.24-18.32-generic)
[ 0.000000] Command line: root=UUID=6d02d361-75d2-45ad-b612-ea1f40857d88 ro quiet splash
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007e7b0000 (usable)
[ 0.000000] BIOS-e820: 000000007e7b0000 - 000000007e7c5400 (reserved)
[ 0.000000] BIOS-e820: 000000007e7c5400 - 000000007e7e7fb8 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007e7e7fb8 - 000000007f000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed9a000 (reserved)
[ 0.000000] BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 518064) 1 entries of 3200 used
[ 0.000000] end_pfn_map = 1048576
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F7820 checksum 0
[ 0.000000] ACPI: RSDP 000F7820, 0024 (r2 HP )
[ 0.000000] ACPI: XSDT 7E7C81C8, 007C (r1 HPQOEM SLIC-MPC 1 HP 1)
[ 0.000000] ACPI: FACP 7E7C8084, 00F4 (r4 HP 30C8 3 HP 1)
[ 0.000000] ACPI: DSDT 7E7C8538, 128DB (r1 HP nc65xx 10000 MSFT 3000001)
[ 0.000000] ACPI: FACS 7E7E7D80, 0040
[ 0.000000] ACPI: SLIC 7E7C8244, 0176 (r1 HPQOEM SLIC-MPC 1 HP 1)
[ 0.000000] ACPI: HPET 7E7C83BC, 0038 (r1 HP 30C8 1 HP 1)
[ 0.000000] ACPI: APIC 7E7C83F4, 0068 (r1 HP 30C8 1 HP 1)
[ 0.000000] ACPI: MCFG 7E7C845C, 003C (r1 HP 30C8 1 HP 1)
[ 0.000000] ACPI: TCPA 7E7C8498, 0032 (r2 HP 30C8 1 HP 1)
[ 0.000000] ACPI: ASF! 7E7C84CC, 0069 (r16 HP CHIMAYU 1 HP 0)
[ 0.000000] ACPI: SSDT 7E7DAE13, 01AB (r1 HP HPQPAT 1 MSFT 3000001)
[ 0.000000] ACPI: SSDT 7E7DB900, 025F (r1 HP Cpu0Tst 3000 INTL 20060317)
[ 0.000000] ACPI: SSDT 7E7DBB5F, 00A6 (r1 HP Cpu1Tst 3000 INTL 20060317)
[ 0.000000] ACPI: SSDT 7E7DBC05, 04D7 (r1 HP CpuPm 3000 INTL 20060317)
[ 0.000000] ACPI: DMI detected: Hewlett-Packard
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000007e7b0000
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 518064) 1 entries of 3200 used
[ 0.000000] Bootmem setup node 0 0000000000000000-000000007e7b0000
[ 0.000000] No mptable found.
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 518064
[ 0.000000] On node 0 totalpages: 517967
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1218 pages reserved
[ 0.000000] DMA zone: 2725 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7026 pages used for memmap
[ 0.000000] DMA32 zone: 506942 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7f000000:7fc00000)
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 34656 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 509667
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=UUID=6d02d361-75d2-45ad-b612-ea1f40857d88 ro quiet splash
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] hpet clockevent registered
[ 0.000000] TSC calibrated against HPET
[ 18.757564] time.c: Detected 1196.999 MHz processor.
[ 18.759006] Console: colour VGA+ 80x25
[ 18.759011] console [tty0] enabled
[ 18.759037] Checking aperture...
[ 18.759053] Calgary: detecting Calgary via BIOS EBDA area
[ 18.759056] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 18.788273] Memory: 2030904k/2072256k available (2488k kernel code, 40964k reserved, 1319k data, 320k init)
[ 18.788322] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 18.867485] Calibrating delay using timer specific routine.. 2397.01 BogoMIPS (lpj=4794035)
[ 18.867529] Security Framework initialized
[ 18.867537] SELinux: Disabled at boot.
[ 18.867554] AppArmor: AppArmor initialized
[ 18.867559] Failure registering capabilities with primary security module.
[ 18.867855] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 18.869627] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 18.870578] Mount-cache hash table entries: 256
[ 18.870757] Initializing cgroup subsys ns
[ 18.870765] Initializing cgroup subsys cpuacct
[ 18.870786] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 18.870788] CPU: L2 cache: 2048K
[ 18.870791] CPU 0/0 -> Node 0
[ 18.870793] using mwait in idle threads.
[ 18.870796] CPU: Physical Processor ID: 0
[ 18.870798] CPU: Processor Core ID: 0
[ 18.870805] CPU0: Thermal monitoring handled by SMI
[ 18.870822] SMP alternatives: switching to UP code
[ 18.871935] Early unpacking initramfs... done
[ 19.394189] ACPI: Core revision 20070126
[ 19.394308] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 19.544245] Using local APIC timer interrupts.
[ 19.627746] APIC timer calibration result 8312485
[ 19.627749] Detected 8.312 MHz APIC timer.
[ 19.627858] SMP alternatives: switching to SMP code
[ 19.628787] Booting processor 1/2 APIC 0x1
[ 19.639237] Initializing CPU#1
[ 19.719707] Calibrating delay using timer specific routine.. 2393.98 BogoMIPS (lpj=4787969)
[ 19.719716] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 19.719719] CPU: L2 cache: 2048K
[ 19.719722] CPU 1/1 -> Node 0
[ 19.719724] CPU: Physical Processor ID: 0
[ 19.719725] CPU: Processor Core ID: 1
[ 19.719734] CPU1: Thermal monitoring enabled (TM2)
[ 19.720204] Intel(R) Core(TM)2 Duo CPU U7600 @ 1.20GHz stepping 0d
[ 19.720243] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 19.740267] Brought up 2 CPUs
[ 19.740372] CPU0 attaching sched-domain:
[ 19.740375] domain 0: span 03
[ 19.740377] groups: 01 02
[ 19.740382] domain 1: span 03
[ 19.740384] groups: 03
[ 19.740387] CPU1 attaching sched-domain:
[ 19.740389] domain 0: span 03
[ 19.740391] groups: 02 01
[ 19.740395] domain 1: span 03
[ 19.740397] groups: 03
[ 19.740706] net_namespace: 120 bytes
[ 19.741253] Time: 16:18:52 Date: 06/10/08
[ 19.741287] NET: Registered protocol family 16
[ 19.741569] ACPI: bus type pci registered
[ 19.741676] PCI: Using configuration type 1
[ 19.744044] ACPI: EC: Look up EC in DSDT
[ 19.746677] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 19.806024] ACPI: Interpreter enabled
[ 19.806029] ACPI: (supports S0 S3 S4 S5)
[ 19.806049] ACPI: Using IOAPIC for interrupt routing
[ 19.822137] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[ 19.822141] ACPI: EC: driver started in interrupt mode
[ 19.822233] ACPI: PCI Root Bridge [C003] (0000:00)
[ 19.823752] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 19.823757] PCI quirk: region 1100-113f claimed by ICH6 GPIO
[ 19.824752] PCI: Transparent bridge - 0000:00:1e.0
[ 19.824806] ACPI: PCI Interrupt Routing Table [\_SB_.C003._PRT]
[ 19.825472] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C0B2._PRT]
[ 19.825689] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C11F._PRT]
[ 19.825910] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C133._PRT]
[ 19.826131] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C134._PRT]
[ 19.905908] ACPI: PCI Interrupt Link [C12F] (IRQs *10 11)
[ 19.906256] ACPI: PCI Interrupt Link [C130] (IRQs *10 11)
[ 19.906598] ACPI: PCI Interrupt Link [C131] (IRQs 10 *11)
[ 19.906928] ACPI: PCI Interrupt Link [C132] (IRQs 10 11) *0, disabled.
[ 19.907269] ACPI: PCI Interrupt Link [C142] (IRQs 10 *11)
[ 19.907597] ACPI: PCI Interrupt Link [C143] (IRQs 10 11) *0, disabled.
[ 19.907936] ACPI: PCI Interrupt Link [C144] (IRQs 10 11) *5
[ 19.908098] ACPI Exception (pci_link-0184): AE_NOT_FOUND, Evaluating _PRS [20070126]
[ 19.908399] ACPI: Power Resource [C299] (on)
[ 19.908493] ACPI: Power Resource [C1C9] (off)
[ 19.908572] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 19.908614] pnp: PnP ACPI init
[ 19.908624] ACPI: bus type pnp registered
[ 19.922612] pnp: PnP ACPI: found 15 devices
[ 19.922615] ACPI: ACPI bus type pnp unregistered
[ 19.922951] PCI: Using ACPI for IRQ routing
[ 19.922953] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 19.936150] NET: Registered protocol family 8
[ 19.936152] NET: Registered protocol family 20
[ 19.936202] PCI-GART: No AMD northbridge found.
[ 19.936209] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 19.936214] hpet0: 3 64-bit timers, 14318180 Hz
[ 19.937274] AppArmor: AppArmor Filesystem Enabled
[ 19.939581] Time: tsc clocksource has been installed.
[ 19.939596] Switched to high resolution mode on CPU 0
[ 19.940142] Switched to high resolution mode on CPU 1
[ 19.948569] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 19.948574] system 00:00: iomem range 0xe0000-0xfffff could not be reserved
[ 19.948578] system 00:00: iomem range 0x100000-0x7e7fffff could not be reserved
[ 19.948595] system 00:0b: ioport range 0x500-0x55f has been reserved
[ 19.948599] system 00:0b: ioport range 0x800-0x80f has been reserved
[ 19.948604] system 00:0b: iomem range 0xffb00000-0xffbfffff could not be reserved
[ 19.948609] system 00:0b: iomem range 0xfff00000-0xffffffff could not be reserved
[ 19.948618] system 00:0d: ioport range 0x4d0-0x4d1 has been reserved
[ 19.948622] system 00:0d: ioport range 0x1000-0x107f has been reserved
[ 19.948626] system 00:0d: ioport range 0x1100-0x113f has been reserved
[ 19.948631] system 00:0d: ioport range 0x1200-0x121f has been reserved
[ 19.948635] system 00:0d: iomem range 0xf8000000-0xfbffffff has been reserved
[ 19.948640] system 00:0d: iomem range 0xfec00000-0xfec000ff could not be reserved
[ 19.948644] system 00:0d: iomem range 0xfed20000-0xfed3ffff could not be reserved
[ 19.948649] system 00:0d: iomem range 0xfed45000-0xfed8ffff could not be reserved
[ 19.948654] system 00:0d: iomem range 0xfed90000-0xfed99fff could not be reserved
[ 19.948662] system 00:0e: iomem range 0xcee00-0xcffff has been reserved
[ 19.948666] system 00:0e: iomem range 0xd2000-0xd3fff has been reserved
[ 19.948671] system 00:0e: iomem range 0xfeda0000-0xfedbffff could not be reserved
[ 19.948675] system 00:0e: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 19.949256] PCI: Bridge: 0000:00:1c.0
[ 19.949258] IO window: disabled.
[ 19.949265] MEM window: disabled.
[ 19.949270] PREFETCH window: disabled.
[ 19.949277] PCI: Bridge: 0000:00:1c.1
[ 19.949279] IO window: disabled.
[ 19.949286] MEM window: e4000000-e40fffff
[ 19.949292] PREFETCH window: disabled.
[ 19.949299] PCI: Bridge: 0000:00:1c.2
[ 19.949303] IO window: 2000-3fff
[ 19.949310] MEM window: e0000000-e3ffffff
[ 19.949315] PREFETCH window: disabled.
[ 19.949323] PCI: Bridge: 0000:00:1e.0
[ 19.949325] IO window: disabled.
[ 19.949332] MEM window: e4100000-e43fffff
[ 19.949337] PREFETCH window: disabled.
[ 19.949376] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 19.949384] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 19.949415] ACPI: PCI Interrupt 0000:00:1c.1 -> GSI 17 (level, low) -> IRQ 17
[ 19.949422] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 19.949453] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 19.949461] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 19.949478] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 19.949491] NET: Registered protocol family 2
[ 19.992650] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 19.993709] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 19.997096] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 19.998028] TCP: Hash tables configured (established 262144 bind 65536)
[ 19.998032] TCP reno registered
[ 20.008726] checking if image is initramfs... it is
[ 21.141371] Freeing initrd memory: 7548k freed
[ 21.149100] audit: initializing netlink socket (disabled)
[ 21.149117] audit(1213114733.200:1): initialized
[ 21.152070] VFS: Disk quotas dquot_6.5.1
[ 21.152170] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 21.152338] io scheduler noop registered
[ 21.152341] io scheduler anticipatory registered
[ 21.152343] io scheduler deadline registered
[ 21.152484] io scheduler cfq registered (default)
[ 21.152498] Boot video device is 0000:00:02.0
[ 21.155878] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 21.155949] assign_interrupt_mode Found MSI capability
[ 21.156010] Allocate Port Service[0000:00:1c.0:pcie00]
[ 21.156145] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 21.156215] assign_interrupt_mode Found MSI capability
[ 21.156272] Allocate Port Service[0000:00:1c.1:pcie00]
[ 21.156405] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 21.156477] assign_interrupt_mode Found MSI capability
[ 21.156534] Allocate Port Service[0000:00:1c.2:pcie00]
[ 21.156577] Allocate Port Service[0000:00:1c.2:pcie02]
[ 21.191494] Real Time Clock Driver v1.12ac
[ 21.191856] hpet_resources: 0xfed00000 is busy
[ 21.191932] Linux agpgart interface v0.102
[ 21.191935] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 21.192716] 00:02: ttyS0 at I/O 0x200 (irq = 6) is a 16550A
[ 21.193070] ACPI: PCI Interrupt 0000:00:03.3 -> GSI 17 (level, low) -> IRQ 17
[ 21.193188] 0000:00:03.3: ttyS1 at I/O 0x4040 (irq = 17) is a 16550A
[ 21.194094] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 21.194191] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 21.194331] PNP: PS/2 Controller [PNP0303:C296,PNP0f13:C297] at 0x60,0x64 irq 1,12
[ 21.196283] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 21.197054] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 21.197059] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 21.197063] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 21.197069] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 21.197072] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 21.206958] mice: PS/2 mouse device common for all mice
[ 21.207010] cpuidle: using governor ladder
[ 21.207013] cpuidle: using governor menu
[ 21.207201] NET: Registered protocol family 1
[ 21.207331] registered taskstats version 1
[ 21.207483] Magic number: 12:717:337
[ 21.207497] hash matches device ttyzc
[ 21.207572] hash matches device tty58
[ 21.207611] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 21.207615] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 21.207617] EDD information not available.
[ 21.207626] Freeing unused kernel memory: 320k freed
[ 21.228717] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 22.474123] fuse init (API version 7.9)
[ 22.498501] ACPI: SSDT 7E7DB086, 01FB (r1 HP Cpu0Ist 3000 INTL 20060317)
[ 22.498876] ACPI: SSDT 7E7DB306, 05FA (r1 HP Cpu0Cst 3001 INTL 20060317)
[ 22.508029] Monitor-Mwait will be used to enter C-1 state
[ 22.508034] Monitor-Mwait will be used to enter C-2 state
[ 22.508163] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 22.508169] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 22.508487] ACPI: SSDT 7E7DAFBE, 00C8 (r1 HP Cpu1Ist 3000 INTL 20060317)
[ 22.508835] ACPI: SSDT 7E7DB281, 0085 (r1 HP Cpu1Cst 3000 INTL 20060317)
[ 22.510620] Marking TSC unstable due to TSC halts in idle
[ 22.510702] ACPI: CPU1 (power states: C1[C1] C2[C2])
[ 22.510709] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 22.513081] ACPI: Thermal Zone [TZ0] (25 C)
[ 22.514004] Time: hpet clocksource has been installed.
[ 22.517825] ACPI: Thermal Zone [TZ1] (51 C)
[ 22.522295] ACPI: Thermal Zone [TZ3] (42 C)
[ 22.526189] ACPI: Thermal Zone [TZ4] (34 C)
[ 22.989442] SCSI subsystem initialized
[ 23.028266] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
[ 23.028271] Copyright (c) 1999-2006 Intel Corporation.
[ 23.028354] ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 23.028372] PCI: Setting latency timer of device 0000:00:19.0 to 64
[ 23.034622] usbcore: registered new interface driver usbfs
[ 23.034656] usbcore: registered new interface driver hub
[ 23.034693] usbcore: registered new device driver usb
[ 23.035944] USB Universal Host Controller Interface driver v3.0
[ 23.056753] e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:1e:0b:57:3f:88
[ 23.073892] libata version 3.00 loaded.
[ 23.149558] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[ 23.149598] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 23.149614] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 23.149619] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 23.149976] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 23.150016] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00004080
[ 23.150190] usb usb1: configuration #1 chosen from 1 choice
[ 23.150220] hub 1-0:1.0: USB hub found
[ 23.150228] hub 1-0:1.0: 2 ports detected
[ 23.251409] ACPI: PCI Interrupt 0000:00:1a.1 -> GSI 17 (level, low) -> IRQ 17
[ 23.251426] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 23.251432] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 23.251461] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 23.251500] uhci_hcd 0000:00:1a.1: irq 17, io base 0x000040a0
[ 23.251647] usb usb2: configuration #1 chosen from 1 choice
[ 23.251679] hub 2-0:1.0: USB hub found
[ 23.251686] hub 2-0:1.0: 2 ports detected
[ 23.355298] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 23.355315] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 23.355320] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 23.355349] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
[ 23.355385] uhci_hcd 0000:00:1d.0: irq 20, io base 0x000040c0
[ 23.355524] usb usb3: configuration #1 chosen from 1 choice
[ 23.355558] hub 3-0:1.0: USB hub found
[ 23.355565] hub 3-0:1.0: 2 ports detected
[ 23.459250] ACPI: PCI Interrupt 0000:00:1d.1 -> GSI 22 (level, low) -> IRQ 22
[ 23.459268] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 23.459273] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 23.459305] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
[ 23.459345] uhci_hcd 0000:00:1d.1: irq 22, io base 0x000040e0
[ 23.459518] usb usb4: configuration #1 chosen from 1 choice
[ 23.459548] hub 4-0:1.0: USB hub found
[ 23.459555] hub 4-0:1.0: 2 ports detected
[ 23.491112] usb 1-1: new full speed USB device using uhci_hcd and address 2
[ 23.563163] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 23.563181] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 23.563186] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 23.563215] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
[ 23.563253] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004100
[ 23.563388] usb usb5: configuration #1 chosen from 1 choice
[ 23.563417] hub 5-0:1.0: USB hub found
[ 23.563424] hub 5-0:1.0: 2 ports detected
[ 23.657924] usb 1-1: configuration #1 chosen from 1 choice
[ 23.667296] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
[ 23.668084] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 23.668092] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 23.668155] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
[ 23.672083] ehci_hcd 0000:00:1a.7: debug port 1
[ 23.672092] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[ 23.672102] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe4641000
[ 23.686990] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 23.687159] usb usb6: configuration #1 chosen from 1 choice
[ 23.687191] hub 6-0:1.0: USB hub found
[ 23.687200] hub 6-0:1.0: 4 ports detected
[ 23.791055] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
[ 23.791821] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 23.791830] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 23.791893] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
[ 23.795826] ehci_hcd 0000:00:1d.7: debug port 1
[ 23.795834] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 23.795843] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe4648000
[ 23.843539] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 23.844868] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 23.845036] usb usb7: configuration #1 chosen from 1 choice
[ 23.845069] hub 7-0:1.0: USB hub found
[ 23.845077] hub 7-0:1.0: 6 ports detected
[ 23.847207] Clocksource tsc unstable (delta = -91704210 ns)
[ 23.853809] ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 23.906958] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[e4100000-e41007ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 23.915346] ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 23.915391] PCI: Setting latency timer of device 0000:00:03.2 to 64
[ 23.915405] ACPI: PCI interrupt for device 0000:00:03.2 disabled
[ 23.915431] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
[ 23.915459] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 23.915472] ACPI: PCI interrupt for device 0000:00:1f.1 disabled
[ 23.918474] ata_piix 0000:00:1f.1: version 2.12
[ 23.918492] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
[ 23.918531] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 23.919142] scsi0 : ata_piix
[ 23.919827] scsi1 : ata_piix
[ 23.920429] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x4120 irq 14
[ 23.920433] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x4128 irq 15
[ 23.934308] ata1.00: ATA-7: TOSHIBA MK1011GAH, BK001C, max UDMA/100
[ 23.934312] ata1.00: 195371568 sectors, multi 16: LBA
[ 23.935255] ata1.00: configured for UDMA/100
[ 23.935338] ata2: port disabled. ignoring.
[ 23.935503] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1011GA BK00 PQ: 0 ANSI: 5
[ 23.943831] Driver 'sd' needs updating - please use bus_type methods
[ 23.943930] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
[ 23.943946] sd 0:0:0:0: [sda] Write Protect is off
[ 23.943949] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 23.943972] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 23.944039] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
[ 23.944053] sd 0:0:0:0: [sda] Write Protect is off
[ 23.944056] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 23.944079] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 23.944084] sda: sda1 < sda5 sda6 sda7 > sda2 sda3
[ 23.988427] sd 0:0:0:0: [sda] Attached SCSI disk
[ 23.992913] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 24.147724] usb 1-1: USB disconnect, address 2
[ 24.387526] usb 1-1: new full speed USB device using uhci_hcd and address 3
[ 24.536290] Attempting manual resume
[ 24.536294] swsusp: Resume From Partition 8:5
[ 24.536296] PM: Checking swsusp image.
[ 24.536703] PM: Resume from disk failed.
[ 24.564401] usb 1-1: configuration #1 chosen from 1 choice
[ 24.598443] kjournald starting. Commit interval 5 seconds
[ 24.598462] EXT3-fs: mounted filesystem with ordered data mode.
[ 25.027110] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f8429c5540e]
[ 25.230025] usb 7-4: new high speed USB device using ehci_hcd and address 4
[ 25.373891] usb 7-4: configuration #1 chosen from 1 choice
[ 25.613784] usb 3-1: new low speed USB device using uhci_hcd and address 3
[ 25.793829] usb 3-1: configuration #1 chosen from 1 choice
[ 26.035173] usb 3-2: new full speed USB device using uhci_hcd and address 4
[ 26.196638] usb 3-2: configuration #1 chosen from 1 choice
[ 38.955382] tpm_inf_pnp 00:03: Found C27D with ID IFX0102
[ 38.955443] tpm_inf_pnp 00:03: TPM found: config base 0x560, data base 0x570, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2)
[ 39.142933] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 39.182872] iTCO_vendor_support: vendor-support=0
[ 39.222852] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 39.222968] iTCO_wdt: Found a ICH8M-E TCO device (Version=2, TCOBASE=0x1060)
[ 39.223018] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 39.262883] agpgart: Detected an Intel 965GM Chipset.
[ 39.264333] agpgart: Detected 7676K stolen memory.
[ 39.279907] agpgart: AGP aperture is 256M @ 0xd0000000
[ 39.342893] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 39.391244] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 39.443821] input: Power Button (FF) as /devices/virtual/input/input3
[ 39.467976] ACPI: Power Button (FF) [PWRF]
[ 39.468170] input: Sleep Button (CM) as /devices/virtual/input/input4
[ 39.483949] ACPI: Sleep Button (CM) [C2B7]
[ 39.484074] input: Lid Switch as /devices/virtual/input/input5
[ 39.660005] ACPI: Lid Switch [C155]
[ 39.660572] ACPI: AC Adapter [C23D] (on-line)
[ 39.704333] ACPI: Battery Slot [C23F] (battery present)
[ 39.704669] ACPI: Battery Slot [C23E] (battery absent)
[ 39.705481] ACPI: WMI-Acer: Mapper loaded
[ 40.099747] ricoh-mmc: Ricoh MMC Controller disabling driver
[ 40.099752] ricoh-mmc: Copyright(c) Philip Langdale
[ 40.099815] ricoh-mmc: Ricoh MMC controller found at 0000:02:09.2 [1180:0843] (rev 12)
[ 40.099834] ricoh-mmc: Controller is now disabled.
[ 40.399497] sdhci: Secure Digital Host Controller Interface driver
[ 40.399502] sdhci: Copyright(c) Pierre Ossman
[ 40.399571] sdhci: SDHCI controller found at 0000:02:09.1 [1180:0822] (rev 22)
[ 40.399599] ACPI: PCI Interrupt 0000:02:09.1 -> GSI 22 (level, low) -> IRQ 22
[ 40.400338] sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 40.400433] mmc0: SDHCI at 0xe4101000 irq 22 DMA
[ 40.613966] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 40.654278] ACPI: Video Device [C09A] (multi-head: yes rom: no post: no)
[ 40.981131] input: PS/2 Generic Mouse as /devices/platform/i8042/serio4/input/input7
[ 41.060371] iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.2.0
[ 41.060376] iwl4965: Copyright(c) 2003-2007 Intel Corporation
[ 41.060495] ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 41.060507] PCI: Setting latency timer of device 0000:10:00.0 to 64
[ 41.061232] iwl4965: Detected Intel Wireless WiFi Link 4965AGN
[ 41.175248] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 41.175977] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 41.407169] Bluetooth: Core ver 2.11
[ 41.431091] NET: Registered protocol family 31
[ 41.431095] Bluetooth: HCI device and connection manager initialized
[ 41.431101] Bluetooth: HCI socket layer initialized
[ 41.453230] Bluetooth: HCI USB driver ver 2.9
[ 41.454896] usbcore: registered new interface driver hci_usb
[ 41.533536] usbcore: registered new interface driver hiddev
[ 41.538112] Linux video capture interface: v2.00
[ 41.546369] input: Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0 as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/input/input8
[ 41.706682] input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0] on usb-0000:00:1d.0-1
[ 41.706709] usbcore: registered new interface driver usbhid
[ 41.706714] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 41.710054] uvcvideo: Found UVC 1.00 device HP Webcam (04f2:b017)
[ 41.747567] usbcore: registered new interface driver uvcvideo
[ 41.747572] USB Video Class driver (v0.1.0)
[ 43.844483] iwl4965: Tunable channels: 13 802.11bg, 19 802.11a channels
[ 43.845067] wmaster0: Selected rate control algorithm 'iwl-4965-rs'
[ 44.572271] loop: module loaded
[ 44.646497] lp: driver loaded but no devices found
[ 44.864354] Adding 3574420k swap on /dev/sda5. Priority:-1 extents:1 across:3574420k
[ 45.417231] EXT3 FS on sda6, internal journal
[ 46.281726] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 46.949523] No dock devices found.
[ 48.690469] ppdev: user-space parallel port driver
[ 48.878108] audit(1213103963.054:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5261 profile="/usr/sbin/cupsd" namespace="default"
[ 51.955671] Bluetooth: L2CAP ver 2.9
[ 51.955679] Bluetooth: L2CAP socket layer initialized
[ 52.141391] Bluetooth: RFCOMM socket layer initialized
[ 52.141415] Bluetooth: RFCOMM TTY layer initialized
[ 52.141419] Bluetooth: RFCOMM ver 1.8
[ 54.430302] [drm] Initialized drm 1.1.0 20060810
[ 54.433672] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 54.433684] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 54.433760] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 66.090249] NET: Registered protocol family 10
[ 66.090713] lo: Disabled Privacy Extensions
[ 66.091509] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 66.092354] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 76.431904] CPU0 attaching NULL sched-domain.
[ 76.431916] CPU1 attaching NULL sched-domain.
[ 76.461338] CPU0 attaching sched-domain:
[ 76.461349] domain 0: span 03
[ 76.461352] groups: 01 02
[ 76.461357] domain 1: span 03
[ 76.461360] groups: 03
[ 76.461363] CPU1 attaching sched-domain:
[ 76.461366] domain 0: span 03
[ 76.461369] groups: 02 01
[ 76.461373] domain 1: span 03
[ 76.461375] groups: 03
[ 80.197633] NET: Registered protocol family 17
[ 82.530138] wlan0: Initial auth_alg=0
[ 82.530149] wlan0: authenticate with AP 00:0f:66:4c:cd:26
[ 82.531995] wlan0: RX authentication from 00:0f:66:4c:cd:26 (alg=0 transaction=2 status=0)
[ 82.532002] wlan0: authenticated
[ 82.532005] wlan0: associate with AP 00:0f:66:4c:cd:26
[ 82.534518] wlan0: RX AssocResp from 00:0f:66:4c:cd:26 (capab=0x411 status=0 aid=1)
[ 82.534526] wlan0: associated
[ 82.539027] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 87.913808] wlan0: no IPv6 routers present
Έτσι δοκίμασα το εξής:
Quote:
| sudo modprobe usbserial vendo=0x03f0 product=0x1e1d(αυτό λέγανε στα forum ότι είναι το σωστό) sudo modprobe sierra |
το καινούργι dmesg:
Code:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.24-18-generic (buildd@king) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed May 28 19:28:38 UTC 2008 (Ubuntu 2.6.24-18.32-generic)
[ 0.000000] Command line: root=UUID=6d02d361-75d2-45ad-b612-ea1f40857d88 ro quiet splash
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007e7b0000 (usable)
[ 0.000000] BIOS-e820: 000000007e7b0000 - 000000007e7c5400 (reserved)
[ 0.000000] BIOS-e820: 000000007e7c5400 - 000000007e7e7fb8 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007e7e7fb8 - 000000007f000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed9a000 (reserved)
[ 0.000000] BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 518064) 1 entries of 3200 used
[ 0.000000] end_pfn_map = 1048576
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F7820 checksum 0
[ 0.000000] ACPI: RSDP 000F7820, 0024 (r2 HP )
[ 0.000000] ACPI: XSDT 7E7C81C8, 007C (r1 HPQOEM SLIC-MPC 1 HP 1)
[ 0.000000] ACPI: FACP 7E7C8084, 00F4 (r4 HP 30C8 3 HP 1)
[ 0.000000] ACPI: DSDT 7E7C8538, 128DB (r1 HP nc65xx 10000 MSFT 3000001)
[ 0.000000] ACPI: FACS 7E7E7D80, 0040
[ 0.000000] ACPI: SLIC 7E7C8244, 0176 (r1 HPQOEM SLIC-MPC 1 HP 1)
[ 0.000000] ACPI: HPET 7E7C83BC, 0038 (r1 HP 30C8 1 HP 1)
[ 0.000000] ACPI: APIC 7E7C83F4, 0068 (r1 HP 30C8 1 HP 1)
[ 0.000000] ACPI: MCFG 7E7C845C, 003C (r1 HP 30C8 1 HP 1)
[ 0.000000] ACPI: TCPA 7E7C8498, 0032 (r2 HP 30C8 1 HP 1)
[ 0.000000] ACPI: ASF! 7E7C84CC, 0069 (r16 HP CHIMAYU 1 HP 0)
[ 0.000000] ACPI: SSDT 7E7DAE13, 01AB (r1 HP HPQPAT 1 MSFT 3000001)
[ 0.000000] ACPI: SSDT 7E7DB900, 025F (r1 HP Cpu0Tst 3000 INTL 20060317)
[ 0.000000] ACPI: SSDT 7E7DBB5F, 00A6 (r1 HP Cpu1Tst 3000 INTL 20060317)
[ 0.000000] ACPI: SSDT 7E7DBC05, 04D7 (r1 HP CpuPm 3000 INTL 20060317)
[ 0.000000] ACPI: DMI detected: Hewlett-Packard
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000007e7b0000
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 518064) 1 entries of 3200 used
[ 0.000000] Bootmem setup node 0 0000000000000000-000000007e7b0000
[ 0.000000] No mptable found.
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 518064
[ 0.000000] On node 0 totalpages: 517967
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1218 pages reserved
[ 0.000000] DMA zone: 2725 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7026 pages used for memmap
[ 0.000000] DMA32 zone: 506942 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7f000000:7fc00000)
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 34656 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 509667
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=UUID=6d02d361-75d2-45ad-b612-ea1f40857d88 ro quiet splash
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] hpet clockevent registered
[ 0.000000] TSC calibrated against HPET
[ 18.757564] time.c: Detected 1196.999 MHz processor.
[ 18.759006] Console: colour VGA+ 80x25
[ 18.759011] console [tty0] enabled
[ 18.759037] Checking aperture...
[ 18.759053] Calgary: detecting Calgary via BIOS EBDA area
[ 18.759056] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 18.788273] Memory: 2030904k/2072256k available (2488k kernel code, 40964k reserved, 1319k data, 320k init)
[ 18.788322] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 18.867485] Calibrating delay using timer specific routine.. 2397.01 BogoMIPS (lpj=4794035)
[ 18.867529] Security Framework initialized
[ 18.867537] SELinux: Disabled at boot.
[ 18.867554] AppArmor: AppArmor initialized
[ 18.867559] Failure registering capabilities with primary security module.
[ 18.867855] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 18.869627] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 18.870578] Mount-cache hash table entries: 256
[ 18.870757] Initializing cgroup subsys ns
[ 18.870765] Initializing cgroup subsys cpuacct
[ 18.870786] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 18.870788] CPU: L2 cache: 2048K
[ 18.870791] CPU 0/0 -> Node 0
[ 18.870793] using mwait in idle threads.
[ 18.870796] CPU: Physical Processor ID: 0
[ 18.870798] CPU: Processor Core ID: 0
[ 18.870805] CPU0: Thermal monitoring handled by SMI
[ 18.870822] SMP alternatives: switching to UP code
[ 18.871935] Early unpacking initramfs... done
[ 19.394189] ACPI: Core revision 20070126
[ 19.394308] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 19.544245] Using local APIC timer interrupts.
[ 19.627746] APIC timer calibration result 8312485
[ 19.627749] Detected 8.312 MHz APIC timer.
[ 19.627858] SMP alternatives: switching to SMP code
[ 19.628787] Booting processor 1/2 APIC 0x1
[ 19.639237] Initializing CPU#1
[ 19.719707] Calibrating delay using timer specific routine.. 2393.98 BogoMIPS (lpj=4787969)
[ 19.719716] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 19.719719] CPU: L2 cache: 2048K
[ 19.719722] CPU 1/1 -> Node 0
[ 19.719724] CPU: Physical Processor ID: 0
[ 19.719725] CPU: Processor Core ID: 1
[ 19.719734] CPU1: Thermal monitoring enabled (TM2)
[ 19.720204] Intel(R) Core(TM)2 Duo CPU U7600 @ 1.20GHz stepping 0d
[ 19.720243] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 19.740267] Brought up 2 CPUs
[ 19.740372] CPU0 attaching sched-domain:
[ 19.740375] domain 0: span 03
[ 19.740377] groups: 01 02
[ 19.740382] domain 1: span 03
[ 19.740384] groups: 03
[ 19.740387] CPU1 attaching sched-domain:
[ 19.740389] domain 0: span 03
[ 19.740391] groups: 02 01
[ 19.740395] domain 1: span 03
[ 19.740397] groups: 03
[ 19.740706] net_namespace: 120 bytes
[ 19.741253] Time: 16:18:52 Date: 06/10/08
[ 19.741287] NET: Registered protocol family 16
[ 19.741569] ACPI: bus type pci registered
[ 19.741676] PCI: Using configuration type 1
[ 19.744044] ACPI: EC: Look up EC in DSDT
[ 19.746677] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 19.806024] ACPI: Interpreter enabled
[ 19.806029] ACPI: (supports S0 S3 S4 S5)
[ 19.806049] ACPI: Using IOAPIC for interrupt routing
[ 19.822137] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[ 19.822141] ACPI: EC: driver started in interrupt mode
[ 19.822233] ACPI: PCI Root Bridge [C003] (0000:00)
[ 19.823752] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 19.823757] PCI quirk: region 1100-113f claimed by ICH6 GPIO
[ 19.824752] PCI: Transparent bridge - 0000:00:1e.0
[ 19.824806] ACPI: PCI Interrupt Routing Table [\_SB_.C003._PRT]
[ 19.825472] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C0B2._PRT]
[ 19.825689] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C11F._PRT]
[ 19.825910] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C133._PRT]
[ 19.826131] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C134._PRT]
[ 19.905908] ACPI: PCI Interrupt Link [C12F] (IRQs *10 11)
[ 19.906256] ACPI: PCI Interrupt Link [C130] (IRQs *10 11)
[ 19.906598] ACPI: PCI Interrupt Link [C131] (IRQs 10 *11)
[ 19.906928] ACPI: PCI Interrupt Link [C132] (IRQs 10 11) *0, disabled.
[ 19.907269] ACPI: PCI Interrupt Link [C142] (IRQs 10 *11)
[ 19.907597] ACPI: PCI Interrupt Link [C143] (IRQs 10 11) *0, disabled.
[ 19.907936] ACPI: PCI Interrupt Link [C144] (IRQs 10 11) *5
[ 19.908098] ACPI Exception (pci_link-0184): AE_NOT_FOUND, Evaluating _PRS [20070126]
[ 19.908399] ACPI: Power Resource [C299] (on)
[ 19.908493] ACPI: Power Resource [C1C9] (off)
[ 19.908572] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 19.908614] pnp: PnP ACPI init
[ 19.908624] ACPI: bus type pnp registered
[ 19.922612] pnp: PnP ACPI: found 15 devices
[ 19.922615] ACPI: ACPI bus type pnp unregistered
[ 19.922951] PCI: Using ACPI for IRQ routing
[ 19.922953] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 19.936150] NET: Registered protocol family 8
[ 19.936152] NET: Registered protocol family 20
[ 19.936202] PCI-GART: No AMD northbridge found.
[ 19.936209] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 19.936214] hpet0: 3 64-bit timers, 14318180 Hz
[ 19.937274] AppArmor: AppArmor Filesystem Enabled
[ 19.939581] Time: tsc clocksource has been installed.
[ 19.939596] Switched to high resolution mode on CPU 0
[ 19.940142] Switched to high resolution mode on CPU 1
[ 19.948569] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 19.948574] system 00:00: iomem range 0xe0000-0xfffff could not be reserved
[ 19.948578] system 00:00: iomem range 0x100000-0x7e7fffff could not be reserved
[ 19.948595] system 00:0b: ioport range 0x500-0x55f has been reserved
[ 19.948599] system 00:0b: ioport range 0x800-0x80f has been reserved
[ 19.948604] system 00:0b: iomem range 0xffb00000-0xffbfffff could not be reserved
[ 19.948609] system 00:0b: iomem range 0xfff00000-0xffffffff could not be reserved
[ 19.948618] system 00:0d: ioport range 0x4d0-0x4d1 has been reserved
[ 19.948622] system 00:0d: ioport range 0x1000-0x107f has been reserved
[ 19.948626] system 00:0d: ioport range 0x1100-0x113f has been reserved
[ 19.948631] system 00:0d: ioport range 0x1200-0x121f has been reserved
[ 19.948635] system 00:0d: iomem range 0xf8000000-0xfbffffff has been reserved
[ 19.948640] system 00:0d: iomem range 0xfec00000-0xfec000ff could not be reserved
[ 19.948644] system 00:0d: iomem range 0xfed20000-0xfed3ffff could not be reserved
[ 19.948649] system 00:0d: iomem range 0xfed45000-0xfed8ffff could not be reserved
[ 19.948654] system 00:0d: iomem range 0xfed90000-0xfed99fff could not be reserved
[ 19.948662] system 00:0e: iomem range 0xcee00-0xcffff has been reserved
[ 19.948666] system 00:0e: iomem range 0xd2000-0xd3fff has been reserved
[ 19.948671] system 00:0e: iomem range 0xfeda0000-0xfedbffff could not be reserved
[ 19.948675] system 00:0e: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 19.949256] PCI: Bridge: 0000:00:1c.0
[ 19.949258] IO window: disabled.
[ 19.949265] MEM window: disabled.
[ 19.949270] PREFETCH window: disabled.
[ 19.949277] PCI: Bridge: 0000:00:1c.1
[ 19.949279] IO window: disabled.
[ 19.949286] MEM window: e4000000-e40fffff
[ 19.949292] PREFETCH window: disabled.
[ 19.949299] PCI: Bridge: 0000:00:1c.2
[ 19.949303] IO window: 2000-3fff
[ 19.949310] MEM window: e0000000-e3ffffff
[ 19.949315] PREFETCH window: disabled.
[ 19.949323] PCI: Bridge: 0000:00:1e.0
[ 19.949325] IO window: disabled.
[ 19.949332] MEM window: e4100000-e43fffff
[ 19.949337] PREFETCH window: disabled.
[ 19.949376] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 19.949384] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 19.949415] ACPI: PCI Interrupt 0000:00:1c.1 -> GSI 17 (level, low) -> IRQ 17
[ 19.949422] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 19.949453] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 19.949461] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 19.949478] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 19.949491] NET: Registered protocol family 2
[ 19.992650] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 19.993709] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 19.997096] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 19.998028] TCP: Hash tables configured (established 262144 bind 65536)
[ 19.998032] TCP reno registered
[ 20.008726] checking if image is initramfs... it is
[ 21.141371] Freeing initrd memory: 7548k freed
[ 21.149100] audit: initializing netlink socket (disabled)
[ 21.149117] audit(1213114733.200:1): initialized
[ 21.152070] VFS: Disk quotas dquot_6.5.1
[ 21.152170] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 21.152338] io scheduler noop registered
[ 21.152341] io scheduler anticipatory registered
[ 21.152343] io scheduler deadline registered
[ 21.152484] io scheduler cfq registered (default)
[ 21.152498] Boot video device is 0000:00:02.0
[ 21.155878] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 21.155949] assign_interrupt_mode Found MSI capability
[ 21.156010] Allocate Port Service[0000:00:1c.0:pcie00]
[ 21.156145] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 21.156215] assign_interrupt_mode Found MSI capability
[ 21.156272] Allocate Port Service[0000:00:1c.1:pcie00]
[ 21.156405] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 21.156477] assign_interrupt_mode Found MSI capability
[ 21.156534] Allocate Port Service[0000:00:1c.2:pcie00]
[ 21.156577] Allocate Port Service[0000:00:1c.2:pcie02]
[ 21.191494] Real Time Clock Driver v1.12ac
[ 21.191856] hpet_resources: 0xfed00000 is busy
[ 21.191932] Linux agpgart interface v0.102
[ 21.191935] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 21.192716] 00:02: ttyS0 at I/O 0x200 (irq = 6) is a 16550A
[ 21.193070] ACPI: PCI Interrupt 0000:00:03.3 -> GSI 17 (level, low) -> IRQ 17
[ 21.193188] 0000:00:03.3: ttyS1 at I/O 0x4040 (irq = 17) is a 16550A
[ 21.194094] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 21.194191] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 21.194331] PNP: PS/2 Controller [PNP0303:C296,PNP0f13:C297] at 0x60,0x64 irq 1,12
[ 21.196283] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 21.197054] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 21.197059] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 21.197063] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 21.197069] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 21.197072] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 21.206958] mice: PS/2 mouse device common for all mice
[ 21.207010] cpuidle: using governor ladder
[ 21.207013] cpuidle: using governor menu
[ 21.207201] NET: Registered protocol family 1
[ 21.207331] registered taskstats version 1
[ 21.207483] Magic number: 12:717:337
[ 21.207497] hash matches device ttyzc
[ 21.207572] hash matches device tty58
[ 21.207611] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 21.207615] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 21.207617] EDD information not available.
[ 21.207626] Freeing unused kernel memory: 320k freed
[ 21.228717] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 22.474123] fuse init (API version 7.9)
[ 22.498501] ACPI: SSDT 7E7DB086, 01FB (r1 HP Cpu0Ist 3000 INTL 20060317)
[ 22.498876] ACPI: SSDT 7E7DB306, 05FA (r1 HP Cpu0Cst 3001 INTL 20060317)
[ 22.508029] Monitor-Mwait will be used to enter C-1 state
[ 22.508034] Monitor-Mwait will be used to enter C-2 state
[ 22.508163] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 22.508169] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 22.508487] ACPI: SSDT 7E7DAFBE, 00C8 (r1 HP Cpu1Ist 3000 INTL 20060317)
[ 22.508835] ACPI: SSDT 7E7DB281, 0085 (r1 HP Cpu1Cst 3000 INTL 20060317)
[ 22.510620] Marking TSC unstable due to TSC halts in idle
[ 22.510702] ACPI: CPU1 (power states: C1[C1] C2[C2])
[ 22.510709] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 22.513081] ACPI: Thermal Zone [TZ0] (25 C)
[ 22.514004] Time: hpet clocksource has been installed.
[ 22.517825] ACPI: Thermal Zone [TZ1] (51 C)
[ 22.522295] ACPI: Thermal Zone [TZ3] (42 C)
[ 22.526189] ACPI: Thermal Zone [TZ4] (34 C)
[ 22.989442] SCSI subsystem initialized
[ 23.028266] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
[ 23.028271] Copyright (c) 1999-2006 Intel Corporation.
[ 23.028354] ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 23.028372] PCI: Setting latency timer of device 0000:00:19.0 to 64
[ 23.034622] usbcore: registered new interface driver usbfs
[ 23.034656] usbcore: registered new interface driver hub
[ 23.034693] usbcore: registered new device driver usb
[ 23.035944] USB Universal Host Controller Interface driver v3.0
[ 23.056753] e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:1e:0b:57:3f:88
[ 23.073892] libata version 3.00 loaded.
[ 23.149558] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[ 23.149598] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 23.149614] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 23.149619] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 23.149976] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 23.150016] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00004080
[ 23.150190] usb usb1: configuration #1 chosen from 1 choice
[ 23.150220] hub 1-0:1.0: USB hub found
[ 23.150228] hub 1-0:1.0: 2 ports detected
[ 23.251409] ACPI: PCI Interrupt 0000:00:1a.1 -> GSI 17 (level, low) -> IRQ 17
[ 23.251426] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 23.251432] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 23.251461] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 23.251500] uhci_hcd 0000:00:1a.1: irq 17, io base 0x000040a0
[ 23.251647] usb usb2: configuration #1 chosen from 1 choice
[ 23.251679] hub 2-0:1.0: USB hub found
[ 23.251686] hub 2-0:1.0: 2 ports detected
[ 23.355298] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 23.355315] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 23.355320] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 23.355349] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
[ 23.355385] uhci_hcd 0000:00:1d.0: irq 20, io base 0x000040c0
[ 23.355524] usb usb3: configuration #1 chosen from 1 choice
[ 23.355558] hub 3-0:1.0: USB hub found
[ 23.355565] hub 3-0:1.0: 2 ports detected
[ 23.459250] ACPI: PCI Interrupt 0000:00:1d.1 -> GSI 22 (level, low) -> IRQ 22
[ 23.459268] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 23.459273] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 23.459305] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
[ 23.459345] uhci_hcd 0000:00:1d.1: irq 22, io base 0x000040e0
[ 23.459518] usb usb4: configuration #1 chosen from 1 choice
[ 23.459548] hub 4-0:1.0: USB hub found
[ 23.459555] hub 4-0:1.0: 2 ports detected
[ 23.491112] usb 1-1: new full speed USB device using uhci_hcd and address 2
[ 23.563163] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 23.563181] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 23.563186] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 23.563215] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
[ 23.563253] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004100
[ 23.563388] usb usb5: configuration #1 chosen from 1 choice
[ 23.563417] hub 5-0:1.0: USB hub found
[ 23.563424] hub 5-0:1.0: 2 ports detected
[ 23.657924] usb 1-1: configuration #1 chosen from 1 choice
[ 23.667296] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
[ 23.668084] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 23.668092] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 23.668155] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
[ 23.672083] ehci_hcd 0000:00:1a.7: debug port 1
[ 23.672092] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[ 23.672102] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe4641000
[ 23.686990] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 23.687159] usb usb6: configuration #1 chosen from 1 choice
[ 23.687191] hub 6-0:1.0: USB hub found
[ 23.687200] hub 6-0:1.0: 4 ports detected
[ 23.791055] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
[ 23.791821] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 23.791830] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 23.791893] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
[ 23.795826] ehci_hcd 0000:00:1d.7: debug port 1
[ 23.795834] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 23.795843] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe4648000
[ 23.843539] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 23.844868] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 23.845036] usb usb7: configuration #1 chosen from 1 choice
[ 23.845069] hub 7-0:1.0: USB hub found
[ 23.845077] hub 7-0:1.0: 6 ports detected
[ 23.847207] Clocksource tsc unstable (delta = -91704210 ns)
[ 23.853809] ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 23.906958] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[e4100000-e41007ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 23.915346] ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 23.915391] PCI: Setting latency timer of device 0000:00:03.2 to 64
[ 23.915405] ACPI: PCI interrupt for device 0000:00:03.2 disabled
[ 23.915431] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
[ 23.915459] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 23.915472] ACPI: PCI interrupt for device 0000:00:1f.1 disabled
[ 23.918474] ata_piix 0000:00:1f.1: version 2.12
[ 23.918492] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
[ 23.918531] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 23.919142] scsi0 : ata_piix
[ 23.919827] scsi1 : ata_piix
[ 23.920429] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x4120 irq 14
[ 23.920433] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x4128 irq 15
[ 23.934308] ata1.00: ATA-7: TOSHIBA MK1011GAH, BK001C, max UDMA/100
[ 23.934312] ata1.00: 195371568 sectors, multi 16: LBA
[ 23.935255] ata1.00: configured for UDMA/100
[ 23.935338] ata2: port disabled. ignoring.
[ 23.935503] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1011GA BK00 PQ: 0 ANSI: 5
[ 23.943831] Driver 'sd' needs updating - please use bus_type methods
[ 23.943930] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
[ 23.943946] sd 0:0:0:0: [sda] Write Protect is off
[ 23.943949] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 23.943972] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 23.944039] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
[ 23.944053] sd 0:0:0:0: [sda] Write Protect is off
[ 23.944056] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 23.944079] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 23.944084] sda: sda1 < sda5 sda6 sda7 > sda2 sda3
[ 23.988427] sd 0:0:0:0: [sda] Attached SCSI disk
[ 23.992913] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 24.147724] usb 1-1: USB disconnect, address 2
[ 24.387526] usb 1-1: new full speed USB device using uhci_hcd and address 3
[ 24.536290] Attempting manual resume
[ 24.536294] swsusp: Resume From Partition 8:5
[ 24.536296] PM: Checking swsusp image.
[ 24.536703] PM: Resume from disk failed.
[ 24.564401] usb 1-1: configuration #1 chosen from 1 choice
[ 24.598443] kjournald starting. Commit interval 5 seconds
[ 24.598462] EXT3-fs: mounted filesystem with ordered data mode.
[ 25.027110] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f8429c5540e]
[ 25.230025] usb 7-4: new high speed USB device using ehci_hcd and address 4
[ 25.373891] usb 7-4: configuration #1 chosen from 1 choice
[ 25.613784] usb 3-1: new low speed USB device using uhci_hcd and address 3
[ 25.793829] usb 3-1: configuration #1 chosen from 1 choice
[ 26.035173] usb 3-2: new full speed USB device using uhci_hcd and address 4
[ 26.196638] usb 3-2: configuration #1 chosen from 1 choice
[ 38.955382] tpm_inf_pnp 00:03: Found C27D with ID IFX0102
[ 38.955443] tpm_inf_pnp 00:03: TPM found: config base 0x560, data base 0x570, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2)
[ 39.142933] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 39.182872] iTCO_vendor_support: vendor-support=0
[ 39.222852] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 39.222968] iTCO_wdt: Found a ICH8M-E TCO device (Version=2, TCOBASE=0x1060)
[ 39.223018] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 39.262883] agpgart: Detected an Intel 965GM Chipset.
[ 39.264333] agpgart: Detected 7676K stolen memory.
[ 39.279907] agpgart: AGP aperture is 256M @ 0xd0000000
[ 39.342893] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 39.391244] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 39.443821] input: Power Button (FF) as /devices/virtual/input/input3
[ 39.467976] ACPI: Power Button (FF) [PWRF]
[ 39.468170] input: Sleep Button (CM) as /devices/virtual/input/input4
[ 39.483949] ACPI: Sleep Button (CM) [C2B7]
[ 39.484074] input: Lid Switch as /devices/virtual/input/input5
[ 39.660005] ACPI: Lid Switch [C155]
[ 39.660572] ACPI: AC Adapter [C23D] (on-line)
[ 39.704333] ACPI: Battery Slot [C23F] (battery present)
[ 39.704669] ACPI: Battery Slot [C23E] (battery absent)
[ 39.705481] ACPI: WMI-Acer: Mapper loaded
[ 40.099747] ricoh-mmc: Ricoh MMC Controller disabling driver
[ 40.099752] ricoh-mmc: Copyright(c) Philip Langdale
[ 40.099815] ricoh-mmc: Ricoh MMC controller found at 0000:02:09.2 [1180:0843] (rev 12)
[ 40.099834] ricoh-mmc: Controller is now disabled.
[ 40.399497] sdhci: Secure Digital Host Controller Interface driver
[ 40.399502] sdhci: Copyright(c) Pierre Ossman
[ 40.399571] sdhci: SDHCI controller found at 0000:02:09.1 [1180:0822] (rev 22)
[ 40.399599] ACPI: PCI Interrupt 0000:02:09.1 -> GSI 22 (level, low) -> IRQ 22
[ 40.400338] sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 40.400433] mmc0: SDHCI at 0xe4101000 irq 22 DMA
[ 40.613966] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 40.654278] ACPI: Video Device [C09A] (multi-head: yes rom: no post: no)
[ 40.981131] input: PS/2 Generic Mouse as /devices/platform/i8042/serio4/input/input7
[ 41.060371] iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.2.0
[ 41.060376] iwl4965: Copyright(c) 2003-2007 Intel Corporation
[ 41.060495] ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 41.060507] PCI: Setting latency timer of device 0000:10:00.0 to 64
[ 41.061232] iwl4965: Detected Intel Wireless WiFi Link 4965AGN
[ 41.175248] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 41.175977] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 41.407169] Bluetooth: Core ver 2.11
[ 41.431091] NET: Registered protocol family 31
[ 41.431095] Bluetooth: HCI device and connection manager initialized
[ 41.431101] Bluetooth: HCI socket layer initialized
[ 41.453230] Bluetooth: HCI USB driver ver 2.9
[ 41.454896] usbcore: registered new interface driver hci_usb
[ 41.533536] usbcore: registered new interface driver hiddev
[ 41.538112] Linux video capture interface: v2.00
[ 41.546369] input: Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0 as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/input/input8
[ 41.706682] input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0] on usb-0000:00:1d.0-1
[ 41.706709] usbcore: registered new interface driver usbhid
[ 41.706714] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 41.710054] uvcvideo: Found UVC 1.00 device HP Webcam (04f2:b017)
[ 41.747567] usbcore: registered new interface driver uvcvideo
[ 41.747572] USB Video Class driver (v0.1.0)
[ 43.844483] iwl4965: Tunable channels: 13 802.11bg, 19 802.11a channels
[ 43.845067] wmaster0: Selected rate control algorithm 'iwl-4965-rs'
[ 44.572271] loop: module loaded
[ 44.646497] lp: driver loaded but no devices found
[ 44.864354] Adding 3574420k swap on /dev/sda5. Priority:-1 extents:1 across:3574420k
[ 45.417231] EXT3 FS on sda6, internal journal
[ 46.281726] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 46.949523] No dock devices found.
[ 48.690469] ppdev: user-space parallel port driver
[ 48.878108] audit(1213103963.054:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5261 profile="/usr/sbin/cupsd" namespace="default"
[ 51.955671] Bluetooth: L2CAP ver 2.9
[ 51.955679] Bluetooth: L2CAP socket layer initialized
[ 52.141391] Bluetooth: RFCOMM socket layer initialized
[ 52.141415] Bluetooth: RFCOMM TTY layer initialized
[ 52.141419] Bluetooth: RFCOMM ver 1.8
[ 54.430302] [drm] Initialized drm 1.1.0 20060810
[ 54.433672] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 54.433684] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 54.433760] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 66.090249] NET: Registered protocol family 10
[ 66.090713] lo: Disabled Privacy Extensions
[ 66.091509] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 66.092354] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 76.431904] CPU0 attaching NULL sched-domain.
[ 76.431916] CPU1 attaching NULL sched-domain.
[ 76.461338] CPU0 attaching sched-domain:
[ 76.461349] domain 0: span 03
[ 76.461352] groups: 01 02
[ 76.461357] domain 1: span 03
[ 76.461360] groups: 03
[ 76.461363] CPU1 attaching sched-domain:
[ 76.461366] domain 0: span 03
[ 76.461369] groups: 02 01
[ 76.461373] domain 1: span 03
[ 76.461375] groups: 03
[ 80.197633] NET: Registered protocol family 17
[ 82.530138] wlan0: Initial auth_alg=0
[ 82.530149] wlan0: authenticate with AP 00:0f:66:4c:cd:26
[ 82.531995] wlan0: RX authentication from 00:0f:66:4c:cd:26 (alg=0 transaction=2 status=0)
[ 82.532002] wlan0: authenticated
[ 82.532005] wlan0: associate with AP 00:0f:66:4c:cd:26
[ 82.534518] wlan0: RX AssocResp from 00:0f:66:4c:cd:26 (capab=0x411 status=0 aid=1)
[ 82.534526] wlan0: associated
[ 82.539027] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 87.913808] wlan0: no IPv6 routers present
[ 525.112262] usbcore: registered new interface driver usbserial
[ 525.112685] /build/buildd/linux-2.6.24/drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
[ 525.113100] usbcore: registered new interface driver usbserial_generic
[ 525.113107] /build/buildd/linux-2.6.24/drivers/usb/serial/usb-serial.c: USB Serial Driver core
[ 526.702673] /build/buildd/linux-2.6.24/drivers/usb/serial/usb-serial.c: USB Serial support registered for Sierra USB modem (1 port)
[ 526.702696] /build/buildd/linux-2.6.24/drivers/usb/serial/usb-serial.c: USB Serial support registered for Sierra USB modem (3 port)
[ 526.702741] usbcore: registered new interface driver sierra
[ 526.702745] /build/buildd/linux-2.6.24/drivers/usb/serial/sierra.c: USB Driver for Sierra Wireless USB modems: v.1.2.5b
Quote:
| diff dmesg dmesg2 539a540,547 > [ 525.112262] usbcore: registered new interface driver usbserial > [ 525.112685] /build/buildd/linux-2.6.24/drivers/usb/serial/usb-serial.c: USB Serial support registered for generic > [ 525.113100] usbcore: registered new interface driver usbserial_generic > [ 525.113107] /build/buildd/linux-2.6.24/drivers/usb/serial/usb-serial.c: USB Serial Driver core > [ 526.702673] /build/buildd/linux-2.6.24/drivers/usb/serial/usb-serial.c: USB Serial support registered for Sierra USB modem (1 port) > [ 526.702696] /build/buildd/linux-2.6.24/drivers/usb/serial/usb-serial.c: USB Serial support registered for Sierra USB modem (3 port) > [ 526.702741] usbcore: registered new interface driver sierra > [ 526.702745] /build/buildd/linux-2.6.24/drivers/usb/serial/sierra.c: USB Driver for Sierra Wireless USB modems: v.1.2.5b |
Μάλλον το πρόβλημα δεν είναι ούτε στον driver ούτε στο modprobe αλλά πιο πίσω στο hardware γιατί η κάρτα είναι σαν να μην υπάρχει. Στο bios πάντως είναι enabled.
Οποιος μπορεί να βοηθήσει...!
Φόρουμ
Δώσε αστέρια!
- Συνδεθείτε ή εγγραφείτε για να σχολιάσετε
Σχόλια
Έχεις δει αυτή την "ανεπίσημη" υποστήριξη από το site της sierra ??
Αυτο προυποθέτει ότι το σύστημα βλέπει την κάρτα. Εμένα δεν την βλέπει. Εδώ λέμε πείραξα και τον κώδικα που δίνει η Sierra και δεν κατάφερα τίποτα. Λογικά χρειάζεται κάποιο ρεύμα να την κάνει enable την κάρτα...αν έχω καταλάβει.
Πάλι χαζομάρα μπορεί να πω
... αλλά για να σιγουρευτούμε ότι τα'χεις κάνει όλα:
Το γράφω και στο post μου άμα το δεις ότι έχω ενεργοποιήσει την SIM, άσε που δεν είναι CDMA αλλά GSM.
Άσε αυτά τα έχω ψάξει όλα όπως και όλο το internet. Η λύση πρέπει να είναι στο hardware και πως το βλέπει το linux.
Για να καταλάβω. Αφού έκανες την hackeria
το output από lsusb και lspci παρέμεινε το ίδιο;
Για δοκίμασε να την απενεργοποιήσεις απο το bios και κοίτα αν υπάρχει καμία διαφορά στα dmesg, lspci και lsusb.
Επίσης δοκίμασε το πακέτο hwinfo rather than discover.
Το ίδιο μένουν όλα σαν να μην άλλαξε τίποτα. Χρησιμοποίησα και το hwinfo και δεν βρήκα τίποτα. Σκέφτομαι ότι ίσως να χρειαζεται κάποιο ρεύμα για να να γίνει enable η κάρτα που θα το έπαιρνε από το λειτουργικό. Στα vista ήταν πάλι πάντα απενεργοποιημένη εκτός και αν έτρεχε το πρόγραμμά της.