Ubuntu 10.04 PPPoE over Wireless

Κανε δεξι κλικ στο εικονιδιο του δικτυου και πηγαινε στην επιλογη "Edit Connections".

Στο παραθυρο που σου ανοιγει πηγαινε στην καρτελα "Wireless" και πατα "Add".

Στο καινουριο παραθυρο δωσε τα στοιχεια που σου ζηταει στην καρτελα "Wireless" και στην επομενη καρτελα στην επιλογη "security" επελεξε αυτο που λεει "LEAP" οπου ειναι και το μοναδικο απο τους τυπους ασφαλειας που ζηταει username & password.Δωσε τα στοιχεια σου, πατα "Apply" και δες αν εχει συνδεθει.Δοκιμασε αυτον τον τροπο και πες μας το αποτελεσμα.

Αλλιως δωσε περισσοτερα στοιχεια για τον τυπο του ασυρματου δικτυου.

Συνδεθείτε ή εγγραφείτε για να σχολιάσετε

Δεν δουλεψε.

Λοιπον θα γραψω τα βηματα που κάνω στα Windows 7 μηπως και βρουμε λύση.

Στα ασυρματα δικτυα βρισκω το δικό μου, εστω κ1, και συνδεομαι χωρις κωδικο.

Τωρα για να συνδεθω στο ιντερνετ πρέπει να δημιουργήσω σύνδεση από

Κεντρο δικτύου και κοινής χρήσης->Ρυθμιση νεας συνδεσης ή δικτύου->Συνδεση στο Ιντερνετ->Ευρεία ζώνη(PPPoE)-> Βαζω κωδικό και ονομα και ετοιμο. Εστω κ2

Τωρα για να έχω ιντερνετ πρέπει να συνδεθώ στο κ1 και αφού συνδεθεί πρεπει να συνδεθω στο κ2.

Ελπίζω να καταλαβενετε τι λέω!

:)

Συνδεθείτε ή εγγραφείτε για να σχολιάσετε

Δωσε τα αποτελεσματα των εντολων

lspci -nn

dmesg

iwconfig

και πες μας και πως εχεις κανει την εγκατασταση, κανονικα ή μεσα απο τα παραθυρα (wubi) ?

Συνδεθείτε ή εγγραφείτε για να σχολιάσετε

Με λαιβ usb.

Παω να το κανω κι επιστρεφω με αποτελεσματα!

Συνδεθείτε ή εγγραφείτε για να σχολιάσετε

ubuntu@ubuntu:~$ lspci -nn

00:00.0 Host bridge [0600]: ATI
Technologies Inc RS480 Host Bridge [1002:5950] (rev 10)

00:01.0 PCI bridge [0604]: ATI Technologies
Inc RS480 PCI Bridge [1002:5a3f]

00:04.0 PCI bridge [0604]: ATI Technologies
Inc RS480 PCI Bridge [1002:5a36]

00:12.0 IDE interface [0101]: ATI
Technologies Inc IXP SB400 Serial ATA Controller [1002:4379] (rev 80)

00:13.0 USB Controller [0c03]: ATI
Technologies Inc IXP SB400 USB Host Controller [1002:4374] (rev 80)

00:13.1 USB Controller [0c03]: ATI
Technologies Inc IXP SB400 USB Host Controller [1002:4375] (rev 80)

00:13.2 USB Controller [0c03]: ATI
Technologies Inc IXP SB400 USB2 Host Controller [1002:4373] (rev 80)

00:14.0 SMBus [0c05]: ATI Technologies Inc
IXP SB400 SMBus Controller [1002:4372] (rev 83)

00:14.1 IDE interface [0101]: ATI
Technologies Inc IXP SB400 IDE Controller [1002:4376] (rev 80)

00:14.2 Audio device [0403]: ATI
Technologies Inc IXP SB4x0 High Definition Audio Controller [1002:437b] (rev
01)

00:14.3 ISA bridge [0601]: ATI Technologies
Inc IXP SB400 PCI-ISA Bridge [1002:4377] (rev 80)

00:14.4 PCI bridge [0604]: ATI Technologies
Inc IXP SB400 PCI-PCI Bridge [1002:4371] (rev 80)

00:18.0 Host bridge [0600]: Advanced Micro
Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
[1022:1100]

00:18.1 Host bridge [0600]: Advanced Micro
Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]

00:18.2 Host bridge [0600]: Advanced Micro
Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]

00:18.3 Host bridge [0600]: Advanced Micro
Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]

01:05.0 VGA compatible controller [0300]:
ATI Technologies Inc RS482 [Radeon Xpress 200M] [1002:5975]

05:03.0 Ethernet controller [0200]: Atheros
Communications Inc. AR2413 802.11bg NIC [168c:001a] (rev 01)

05:04.0 FireWire (IEEE 1394) [0c00]: O2
Micro, Inc. Firewire (IEEE 1394) [1217:00f7] (rev 02)

05:04.2 SD Host controller [0805]: O2
Micro, Inc. Integrated MMC/SD Controller [1217:7120] (rev 01)

05:04.3 Mass storage controller [0180]: O2
Micro, Inc. Integrated MS/xD Controller [1217:7130] (rev 01)

05:05.0 Ethernet controller [0200]: Realtek
Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)

Συνδεθείτε ή εγγραφείτε για να σχολιάσετε

Αυτη είναι η δευτερη εντολή αλλά δεν ξερω αν είναι ολοκληρο το αποτέλεσμα

[
0.310387] ACPI: bus type pci registered

[
0.310452] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 6

[
0.310455] PCI: MCFG area at e0000000 reserved in E820

[
0.310691] PCI: Using MMCONFIG at e0000000 - e06fffff

[
0.310693] PCI: Using configuration type 1 for base access

[
0.320151] bio: create slab <bio-0> at 0

[
0.320892] ACPI: EC: Look up EC in DSDT

[
0.323830] ACPI: Interpreter enabled

[
0.323830] ACPI: (supports S0 S3 S4 S5)

[
0.323830] ACPI: Using IOAPIC for interrupt routing

[
0.324584] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62

[
0.330054] ACPI: No dock devices found.

[
0.331348] ACPI: PCI Root Bridge [PCI0] (0000:00)

[
0.331492] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold

[
0.331496] pci 0000:00:04.0: PME# disabled

[
0.331579] pci 0000:00:12.0: reg 10 io port: [0x8440-0x8447]

[
0.331588] pci 0000:00:12.0: reg 14 io port: [0x8430-0x8433]

[
0.331598] pci 0000:00:12.0: reg 18 io port: [0x8420-0x8427]

[
0.331607] pci 0000:00:12.0: reg 1c io port: [0x8410-0x8413]

[
0.331617] pci 0000:00:12.0: reg 20 io port: [0x8400-0x840f]

[
0.331626] pci 0000:00:12.0: reg 24 32bit mmio: [0xc0004000-0xc00041ff]

[
0.331636] pci 0000:00:12.0: reg 30 32bit mmio pref: [0x000000-0x07ffff]

[
0.331670] pci 0000:00:12.0: supports D1 D2

[
0.331707] pci 0000:00:13.0: reg 10 32bit mmio: [0xc0005000-0xc0005fff]

[
0.331784] pci 0000:00:13.1: reg 10 32bit mmio: [0xc0006000-0xc0006fff]

[
0.331876] pci 0000:00:13.2: reg 10 32bit mmio: [0xc0007000-0xc0007fff]

[
0.331941] pci 0000:00:13.2: supports D1 D2

[
0.331944] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot

[
0.331949] pci 0000:00:13.2: PME# disabled

[
0.332003] pci 0000:00:14.0: reg 10 io port: [0x8450-0x845f]

[
0.332013] pci 0000:00:14.0: reg 14 32bit mmio: [0xfed00000-0xfed003ff]

[
0.332050] HPET not enabled in BIOS. You might try hpet=force boot option

[
0.332117] pci 0000:00:14.1: reg 10 io port: [0x1f0-0x1f7]

[
0.332127] pci 0000:00:14.1: reg 14 io port: [0x3f4-0x3f7]

[
0.332136] pci 0000:00:14.1: reg 18 io port: [0x00-0x07]

[
0.332145] pci 0000:00:14.1: reg 1c io port: [0x00-0x03]

[
0.332155] pci 0000:00:14.1: reg 20 io port: [0x8460-0x846f]

[
0.332260] pci 0000:00:14.2: reg 10 64bit mmio: [0xc0000000-0xc0003fff]

[
0.332326] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold

[
0.332332] pci 0000:00:14.2: PME# disabled

[
0.332585] pci 0000:01:05.0: reg 10 32bit mmio pref:
[0xc8000000-0xcfffffff]

[
0.332590] pci 0000:01:05.0: reg 14 io port: [0x9000-0x90ff]

[
0.332595] pci 0000:01:05.0: reg 18 32bit mmio: [0xc0100000-0xc010ffff]

[
0.332607] pci 0000:01:05.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]

[
0.332617] pci 0000:01:05.0: supports D1 D2

[
0.332637] pci 0000:00:01.0: bridge io port: [0x9000-0x9fff]

[
0.332641] pci 0000:00:01.0: bridge 32bit mmio: [0xc0100000-0xc01fffff]

[
0.332646] pci 0000:00:01.0: bridge 64bit mmio pref: [0xc8000000-0xcfffffff]

[
0.332713] pci 0000:00:04.0: bridge io port: [0x00-0xfff]

[
0.332717] pci 0000:00:04.0: bridge 32bit mmio: [0x000000-0x0fffff]

[
0.332789] pci 0000:05:03.0: reg 10 32bit mmio: [0xc0200000-0xc020ffff]

[
0.332927] pci 0000:05:04.0: reg 10 32bit mmio: [0x000000-0x000fff]

[
0.332938] pci 0000:05:04.0: reg 14 32bit mmio: [0xc0210000-0xc02107ff]

[
0.333009] pci 0000:05:04.0: supports D1 D2

[
0.333011] pci 0000:05:04.0: PME# supported from D0 D1 D2 D3hot D3cold

[
0.333018] pci 0000:05:04.0: PME# disabled

[
0.333080] pci 0000:05:04.2: reg 10 32bit mmio: [0xc0210800-0xc02108ff]

[
0.333162] pci 0000:05:04.2: supports D1 D2

[
0.333164] pci 0000:05:04.2: PME# supported from D0 D1 D2 D3hot D3cold

[
0.333171] pci 0000:05:04.2: PME# disabled

[
0.333231] pci 0000:05:04.3: reg 10 32bit mmio: [0xc0212000-0xc0212fff]

[
0.333313] pci 0000:05:04.3: supports D1 D2

[
0.333316] pci 0000:05:04.3: PME# supported from D0 D1 D2 D3hot D3cold

[
0.333322] pci 0000:05:04.3: PME# disabled

[
0.333389] pci 0000:05:05.0: reg 10 io port: [0xa000-0xa0ff]

[
0.333401] pci 0000:05:05.0: reg 14 32bit mmio: [0xc0210c00-0xc0210cff]

[
0.333474] pci 0000:05:05.0: supports D1 D2

[
0.333476] pci 0000:05:05.0: PME# supported from D1 D2 D3hot D3cold

[
0.333483] pci 0000:05:05.0: PME# disabled

[
0.333550] pci 0000:00:14.4: transparent bridge

[
0.333559] pci 0000:00:14.4: bridge io port: [0xa000-0xafff]

[
0.333565] pci 0000:00:14.4: bridge 32bit mmio: [0xc0200000-0xc02fffff]

[
0.333587] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]

[
0.333731] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]

[
0.333872] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]

[
0.333998] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]

[
0.340183] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.

[
0.340340] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.

[
0.340495] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.

[
0.340650] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.

[
0.340803] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.

[
0.340957] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.

[
0.341111] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.

[
0.341266] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.

[
0.341420] ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 7) *0, disabled.

[
0.341564] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none

[
0.341571] vgaarb: loaded

[
0.341718] SCSI subsystem initialized

[
0.341832] libata version 3.00 loaded.

[
0.341921] usbcore: registered new interface driver usbfs

[
0.341935] usbcore: registered new interface driver hub

[
0.341969] usbcore: registered new device driver usb

[
0.342149] ACPI: WMI: Mapper loaded

[
0.342151] PCI: Using ACPI for IRQ routing

[
0.342159] pci 0000:00:04.0: BAR 13: can't allocate resource

[ 0.342162]
pci 0000:00:04.0: BAR 14: can't allocate resource

[
0.342379] NetLabel: Initializing

[
0.342381] NetLabel: domain hash
size = 128

[
0.342383] NetLabel: protocols =
UNLABELED CIPSOv4

[
0.342404] NetLabel: unlabeled
traffic allowed by default

[
0.344734] AppArmor: AppArmor Filesystem Enabled

[
0.344758] pnp: PnP ACPI init

[
0.344779] ACPI: bus type pnp registered

[
0.344911] pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:00:12.0 BAR
6 (0x0-0x7ffff), disabling

[
0.344911] pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:01:05.0 BAR
6 (0x0-0x1ffff), disabling

[
0.344911] pnp: PnP ACPI: found 10 devices

[
0.344911] ACPI: ACPI bus type pnp unregistered

[
0.344911] system 00:01: iomem range 0xe0000000-0xefffffff has been
reserved

[
0.344911] system 00:01: iomem range 0xfec00000-0xfec00fff could not be
reserved

[
0.344911] system 00:01: iomem range 0xfee00000-0xfee00fff has been
reserved

[
0.344911] system 00:08: ioport range 0x1080-0x1080 has been reserved

[
0.344911] system 00:08: ioport range 0x200-0x20f has been reserved

[
0.344911] system 00:08: ioport range 0x220-0x22f has been reserved

[
0.344911] system 00:08: ioport range 0x40b-0x40b has been reserved

[
0.344911] system 00:08: ioport range 0x4d0-0x4d1 has been reserved

[
0.344911] system 00:08: ioport range 0x4d6-0x4d6 has been reserved

[
0.344911] system 00:08: ioport range 0x530-0x537 has been reserved

[
0.344911] system 00:08: ioport range 0xc00-0xc01 has been reserved

[
0.344911] system 00:08: ioport range 0xc14-0xc14 has been reserved

[
0.344911] system 00:08: ioport range 0xc50-0xc52 has been reserved

[
0.344911] system 00:08: ioport range 0xc6c-0xc6c has been reserved

[
0.344911] system 00:08: ioport range 0xc6f-0xc6f has been reserved

[
0.344911] system 00:08: ioport range 0xcd4-0xcd5 has been reserved

[
0.344911] system 00:08: ioport range 0xcd6-0xcd7 has been reserved

[
0.344911] system 00:08: ioport range 0xcd8-0xcdf has been reserved

[
0.344911] system 00:08: ioport range 0x8000-0x805f has been reserved

[
0.344911] system 00:08: ioport range 0xf40-0xf47 has been reserved

[
0.344911] system 00:08: ioport range 0x87f-0x87f has been reserved

[
0.344911] system 00:09: iomem range 0xe0000-0xfffff could not be
reserved

[
0.344911] system 00:09: iomem range 0xfff00000-0xffffffff could not be
reserved

[
0.352975] Switching to clocksource acpi_pm

[
2.966973] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01

[
2.966973] pci 0000:00:01.0: IO
window: 0x9000-0x9fff

[
2.966973] pci 0000:00:01.0: MEM
window: 0xc0100000-0xc01fffff

[
2.966973] pci 0000:00:01.0:
PREFETCH window: 0x000000c8000000-0x000000cfffffff

[
2.966973] pci 0000:00:04.0: PCI bridge, secondary bus 0000:02

[
2.966973] pci 0000:00:04.0: IO
window: 0x2000-0x2fff

[
2.966973] pci 0000:00:04.0: MEM
window: 0x80000000-0x801fffff

[
2.966973] pci 0000:00:04.0:
PREFETCH window: 0x00000080200000-0x000000803fffff

[
2.966973] pci 0000:00:14.4: PCI bridge, secondary bus 0000:05

[
2.966973] pci 0000:00:14.4: IO
window: 0xa000-0xafff

[
2.966973] pci 0000:00:14.4: MEM
window: 0xc0200000-0xc02fffff

[
2.966973] pci 0000:00:14.4:
PREFETCH window: disabled

[
2.966973] pci 0000:00:04.0: enabling device (0000 -> 0003)

[
2.966973] pci 0000:00:04.0: setting latency timer to 64

[
2.966973] pci_bus 0000:00: resource 0 io: [0x00-0xffff]

[
2.966973] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]

[
2.966973] pci_bus 0000:01: resource 0 io: [0x9000-0x9fff]

[
2.966973] pci_bus 0000:01: resource 1 mem: [0xc0100000-0xc01fffff]

[
2.966973] pci_bus 0000:01: resource 2 pref mem [0xc8000000-0xcfffffff]

[
2.966973] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff]

[
2.966973] pci_bus 0000:02: resource 1 mem: [0x80000000-0x801fffff]

[
2.966973] pci_bus 0000:02: resource 2 pref mem [0x80200000-0x803fffff]

[
2.966973] pci_bus 0000:05: resource 0 io: [0xa000-0xafff]

[
2.966973] pci_bus 0000:05: resource 1 mem: [0xc0200000-0xc02fffff]

[
2.966973] pci_bus 0000:05: resource 3 io: [0x00-0xffff]

[
2.966973] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff]

[
2.966973] NET: Registered protocol family 2

[
2.966973] IP route cache hash table entries: 65536 (order: 7, 524288
bytes)

[
2.966973] TCP established hash table entries: 262144 (order: 10, 4194304
bytes)

[
2.966973] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)

[
2.966973] TCP: Hash tables configured (established 262144 bind 65536)

[
2.966973] TCP reno registered

[
2.966973] NET: Registered protocol family 1

[
2.966986] pci 0000:00:00.0: MSI quirk detected; MSI disabled

[
2.966994] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled

[
2.967085] pci 0000:01:05.0: Boot video device

[
2.967633] Scanning for low memory corruption every 60 seconds

[
2.967809] audit: initializing netlink socket (disabled)

[
2.967826] type=2000 audit(1274327813.963:1): initialized

[
2.979813] HugeTLB registered 2 MB page size, pre-allocated 0 pages

[
2.981761] VFS: Disk quotas dquot_6.5.2

[
2.981842] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)

[
2.982794] fuse init (API version 7.13)

[
2.982906] msgmni has been set to 3740

[
2.983246] alg: No test for stdrng (krng)

[
2.983325] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)

[
2.983329] io scheduler noop registered

[
2.983332] io scheduler anticipatory registered

[
2.983335] io scheduler deadline registered

[
2.983390] io scheduler cfq registered (default)

[
2.990172] pci_hotplug: PCI Hot Plug PCI Core version: 0.5

[
2.990209] pciehp: PCI Express Hot Plug Controller Driver version: 0.4

[
2.990645] ACPI: AC Adapter [AC0] (on-line)

[
2.990749] input: Lid Switch as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0

[
2.990790] ACPI: Lid Switch [LID]

[
2.990853] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1

[
2.990857] ACPI: Power Button [PWRB]

[
2.990914] input: Sleep Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2

[
2.990918] ACPI: Sleep Button [SLPB]

[
2.990991] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3

[
2.990995] ACPI: Power Button [PWRF]

[
2.991324] ACPI: processor limited to max C-state 1

[
2.991397] processor LNXCPU:00: registered as cooling_device0

[
2.991468] processor LNXCPU:01: registered as cooling_device1

[
2.994546] thermal LNXTHERM:01: registered as thermal_zone0

[
2.994561] ACPI: Thermal Zone [THRM] (60 C)

[
2.996495] Linux agpgart interface v0.103

[
2.996553] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled

[
2.998304] brd: module loaded

[
2.999018] loop: module loaded

[
2.999167] input: Macintosh mouse button emulation as
/devices/virtual/input/input4

[
2.999621] alloc irq_desc for 22
on node 0

[
2.999627] alloc kstat_irqs on
node 0

[
2.999638] pata_acpi 0000:00:12.0: PCI INT A -> GSI 22 (level, low)
-> IRQ 22

[
2.999869] alloc irq_desc for 16
on node 0

[
2.999872] alloc kstat_irqs on
node 0

[
2.999878] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low)
-> IRQ 16

[
2.999912] pata_acpi 0000:00:14.1: setting latency timer to 64

[
3.000833] Fixed MDIO Bus: probed

[
3.000877] PPP generic driver version 2.4.2

[
3.000948] tun: Universal TUN/TAP device driver, 1.6

[
3.000951] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>

[
3.001086] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[
3.001160] alloc irq_desc for 19
on node 0

[
3.001163] alloc kstat_irqs on
node 0

[
3.001172] ehci_hcd 0000:00:13.2: PCI INT A -> GSI 19 (level, low)
-> IRQ 19

[
3.001199] ehci_hcd 0000:00:13.2: EHCI Host Controller

[
3.001246] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus
number 1

[
3.001329] ehci_hcd 0000:00:13.2: irq 19, io mem 0xc0007000

[
3.005479] ACPI: Battery Slot [BAT0] (battery present)

[
3.020048] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00

[
3.020178] usb usb1: configuration #1 chosen from 1 choice

[
3.020221] hub 1-0:1.0: USB hub found

[
3.020231] hub 1-0:1.0: 8 ports detected

[
3.020352] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

[
3.020422] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 19 (level, low)
-> IRQ 19

[
3.020440] ohci_hcd 0000:00:13.0: OHCI Host Controller

[
3.020486] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus
number 2

[
3.020510] ohci_hcd 0000:00:13.0: irq 19, io mem 0xc0005000

[
3.080134] usb usb2: configuration #1 chosen from 1 choice

[
3.080165] hub 2-0:1.0: USB hub found

[
3.080180] hub 2-0:1.0: 4 ports detected

[
3.080285] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 19 (level, low)
-> IRQ 19

[
3.080298] ohci_hcd 0000:00:13.1: OHCI Host Controller

[
3.080347] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus
number 3

[
3.080370] ohci_hcd 0000:00:13.1: irq 19, io mem 0xc0006000

[
3.140129] usb usb3: configuration #1 chosen from 1 choice

[
3.140169] hub 3-0:1.0: USB hub found

[
3.140184] hub 3-0:1.0: 4 ports detected

[
3.140259] uhci_hcd: USB Universal Host Controller Interface driver

[
3.140362] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64
irq 1,12

[
3.142167] i8042.c: Detected active multiplexing controller, rev 1.1.

[
3.143402] serio: i8042 KBD port at 0x60,0x64 irq 1

[
3.143409] serio: i8042 AUX0 port at 0x60,0x64 irq 12

[
3.143445] serio: i8042 AUX1 port at 0x60,0x64 irq 12

[
3.143476] serio: i8042 AUX2 port at 0x60,0x64 irq 12

[
3.143503] serio: i8042 AUX3 port at 0x60,0x64 irq 12

[
3.143652] mice: PS/2 mouse device common for all mice

[
3.143910] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0

[
3.143942] rtc0: alarms up to one month, 114 bytes nvram

[
3.144118] device-mapper: uevent: version 1.0.3

[
3.144277] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised:
[email protected]

[
3.144378] device-mapper: multipath: version 1.1.0 loaded

[
3.144381] device-mapper: multipath round-robin: version 1.0.0 loaded

[
3.144621] cpuidle: using governor ladder

[
3.144624] cpuidle: using governor menu

[
3.145108] TCP cubic registered

[
3.145272] NET: Registered protocol family 10

[
3.145879] lo: Disabled Privacy Extensions

[
3.146297] NET: Registered protocol family 17

[
3.146346] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology
TL-52 processors (2 cpu cores) (version 2.20.00)

[
3.146395] powernow-k8: 0 : fid
0x8 (1600 MHz), vid 0x13

[
3.146398] powernow-k8: 1 : fid
0x0 (800 MHz), vid 0x1e

[
3.146576] PM: Resume from disk failed.

[
3.146592] registered taskstats version 1

[
3.146996] Magic number:
10:701:917

[
3.147102] rtc_cmos 00:04: setting system clock to 2010-05-20 03:56:54
UTC (1274327814)

[
3.147106] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found

[
3.147108] EDD information not available.

[
3.175939] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input5

[
3.340040] usb 1-8: new high speed USB device using ehci_hcd and address
2

[
3.476390] Freeing initrd memory: 9607k freed

[
3.482738] Freeing unused kernel memory: 876k freed

[
3.483347] Write protecting the kernel read-only data: 7680k

[
3.493449] usb 1-8: configuration #1 chosen from 1 choice

[
3.517694] udev: starting version 151

[
3.620744] scsi0 : pata_atiixp

[
3.646606] scsi1 : pata_atiixp

[
3.647560] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8460 irq
14

[
3.647565] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8468 irq
15

[
3.671873] Initializing USB Mass Storage driver...

[
3.672036] scsi2 : SCSI emulation for USB Mass Storage devices

[
3.672221] usbcore: registered new interface driver usb-storage

[
3.672225] USB Mass Storage support registered.

[
3.672335] usb-storage: device found at 2

[
3.672337] usb-storage: waiting for device to settle before scanning

[
3.672365] sata_sil 0000:00:12.0: version 2.4

[
3.675956] scsi3 : sata_sil

[
3.676165] scsi4 : sata_sil

[
3.676468] ata3: SATA max UDMA/100 mmio m512@0xc0004000 tf 0xc0004080 irq
22

[
3.676473] ata4: SATA max UDMA/100 mmio m512@0xc0004000 tf 0xc00040c0 irq
22

[
3.820622] ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-T10N, PW03, max UDMA/33

[
3.860580] ata1.00: configured for UDMA/33

[
3.866329] scsi 0:0:0:0: CD-ROM
HL-DT-ST DVDRAM GSA-T10N PW03 PQ:
0 ANSI: 5

[
3.878129] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2
cdda tray

[
3.878133] Uniform CD-ROM driver Revision: 3.20

[
3.878284] sr 0:0:0:0: Attached scsi CD-ROM sr0

[
3.878373] sr 0:0:0:0: Attached scsi generic sg0 type 5

[
4.200084] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)

[
4.254727] ata3.00: ATA-7: WDC WD1600BEVS-22RST0, 04.01G04, max UDMA/133

[
4.254731] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)

[
4.291381] ata3.00: configured for UDMA/100

[
4.291491] scsi 3:0:0:0: Direct-Access
ATA      WDC WD1600BEVS-2 04.0 PQ:
0 ANSI: 5

[
4.291689] sd 3:0:0:0: Attached scsi generic sg1 type 0

[
4.291709] sd 3:0:0:0: [sda] 312581808 512-byte logical blocks: (160
GB/149 GiB)

[
4.291794] sd 3:0:0:0: [sda] Write Protect is off

[
4.291798] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00

[
4.291830] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA

[
4.292028] sda: sda1 sda2 sda3
sda4

[
4.304889] sd 3:0:0:0: [sda] Attached SCSI disk

[
4.640068] ata4: SATA link down (SStatus 0 SControl 310)

[
4.650506] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)

[
4.650595] 8139cp 0000:05:05.0: This (id 10ec:8139 rev 10) is not an
8139C+ compatible chip, use 8139too

[
4.651270] acpi device:20: registered as cooling_device2

[
4.651422] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:1e/LNXVIDEO:00/input/input6

[
4.651501] ACPI: Video Device [VGA] (multi-head: yes rom: no
post: no)

[
4.654334] 8139too Fast Ethernet driver 0.9.28

[
4.680134] ohci1394 0000:05:04.0: enabling device (0015 -> 0017)

[
4.680145] alloc irq_desc for 20
on node 0

[
4.680148] alloc kstat_irqs on
node 0

[
4.680158] ohci1394 0000:05:04.0: PCI INT A -> GSI 20 (level, low)
-> IRQ 20

[
4.680659] [drm] Initialized drm 1.1.0 20060810

[
4.723356] [drm] radeon defaulting to kernel modesetting.

[
4.723360] [drm] radeon kernel modesetting enabled.

[
4.723509] alloc irq_desc for 17
on node 0

[
4.723512] alloc kstat_irqs on
node 0

[
4.723521] radeon 0000:01:05.0: PCI INT A -> GSI 17 (level, low) ->
IRQ 17

[
4.727031] [drm] radeon: Initializing kernel modesetting.

[
4.727196] [drm] register mmio base: 0xC0100000

[
4.727198] [drm] register mmio size: 65536

[
4.727502] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)

[
4.727514] [drm:rs400_gart_adjust_size] *ERROR* Forcing to 32M GART size
(because of ASIC bug ?)

[
4.727519] [drm] Generation 2 PCI interface, using max accessible memory

[
4.727522] [drm] radeon: VRAM 128M

[
4.727524] [drm] radeon: VRAM from 0x78000000 to 0x7FFFFFFF

[
4.727526] [drm] radeon: GTT 32M

[
4.727528] [drm] radeon: GTT from 0x80000000 to 0x81FFFFFF

[
4.727568] [drm] radeon: irq initialized.

[
4.727783] [drm] Detected VRAM RAM=128M, BAR=128M

[
4.727789] [drm] RAM width 128bits DDR

[
4.727926] [TTM] Zone kernel:
Available graphics memory: 962752 kiB.

[
4.727949] [drm] radeon: 128M of VRAM memory ready

[
4.727951] [drm] radeon: 32M of GTT memory ready.

[
4.727979] [drm] GART: num cpu pages 8192, num gpu pages 8192

[
4.728425] [drm] radeon: 1 quad pipes, 1 z pipes initialized.

[
4.728440] [drm] radeon: cp idle (0x10000C03)

[
4.728489] [drm] Loading R300 Microcode

[
4.728494] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin

[
4.731036] [drm] radeon: ring at 0x0000000080000000

[
4.731058] [drm] ring test succeeded in 1 usecs

[
4.731247] [drm] radeon: ib pool ready.

[
4.731320] [drm] ib test succeeded in 0 usecs

[
4.731365] [drm] Default TV standard: PAL

[
4.731367] [drm] 14.318180000 MHz TV ref clk

[
4.731459] [drm] Panel ID String: CPT

[
4.731462] [drm] Panel Size 1280x800

[
4.731518] [drm] Default TV standard: PAL

[
4.731520] [drm] 14.318180000 MHz TV ref clk

[
4.731553] [drm] Radeon Display Connectors

[
4.731555] [drm] Connector 0:

[
4.731557] [drm] VGA

[
4.731560] [drm] DDC: 0x68 0x68
0x68 0x68 0x68 0x68 0x68 0x68

[
4.731562] [drm] Encoders:

[
4.731564] [drm] CRT1:
INTERNAL_DAC2

[
4.731566] [drm] Connector 1:

[ 4.731568] [drm] LVDS

[
4.731571] [drm] DDC: 0x198 0x198
0x19c 0x19c 0x1a0 0x1a0 0x1a4 0x1a4

[
4.731573] [drm] Encoders:

[
4.731575] [drm] LCD1:
INTERNAL_LVDS

[
4.731577] [drm] Connector 2:

[
4.731579] [drm] S-video

[
4.731581] [drm] Encoders:

[
4.731582] [drm] TV1:
INTERNAL_DAC2

[
4.740151] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[c0211000-c02117ff] Max Packet=[2048] IR/IT contexts=[8/8]

[
4.740979] 8139too 0000:05:05.0: PCI INT A -> GSI 21 (level, low)
-> IRQ 21

[
4.742704] eth0: RealTek RTL8139 at 0xa000, 00:03:0d:62:d8:bf, IRQ 21

[
4.868919] [drm] fb mappable at 0xC8040000

[
4.868923] [drm] vram apper at 0xC8000000

[
4.868925] [drm] size 4096000

[
4.868927] [drm] fb depth is 24

[
4.868929] [drm] pitch is 5120

[
4.869025] fb0: radeondrmfb frame buffer device

[
4.869028] registered panic notifier

[
4.869034] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:05.0 on
minor 0

[
4.871521] vga16fb: initializing

[
4.871526] vga16fb: mapped to 0xffff8800000a0000

[
4.871533] vga16fb: not registering due to another framebuffer present

[
4.913842] Console: switching to colour frame buffer device 160x50

[
5.577418] xor: automatically using best checksumming function:
generic_sse

[
5.622519] generic_sse: 4912.800 MB/sec

[
5.622522] xor: using function: generic_sse (4912.800 MB/sec)

[
5.625986] device-mapper: dm-raid45: initialized v0.2594b

[
6.060664] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00030d0000001234]

[
6.405590] EXT4-fs (sda3): mounted filesystem with ordered data mode

[
8.660359] usb-storage: device scan complete

[
8.660917] scsi 2:0:0:0: Direct-Access
TOSHIBA TransMemory      1.00 PQ: 0 ANSI: 2

[
8.661744] sd 2:0:0:0: Attached scsi generic sg2 type 0

[
8.662673] sd 2:0:0:0: [sdb] 15654848 512-byte logical blocks: (8.01
GB/7.46 GiB)

[
8.663151] sd 2:0:0:0: [sdb] Write Protect is off

[
8.663155] sd 2:0:0:0: [sdb] Mode Sense: 65 44 09 30

[
8.663158] sd 2:0:0:0: [sdb] Assuming drive cache: write through

[
8.665397] sd 2:0:0:0: [sdb] Assuming drive cache: write through

[
8.665401] sdb: sdb1

[
8.667889] sd 2:0:0:0: [sdb] Assuming drive cache: write through

[
8.667893] sd 2:0:0:0: [sdb] Attached SCSI removable disk

[
9.513971] aufs 2-standalone.tree-20091207

[
9.535864] squashfs: version 4.0 (2009/01/31) Phillip Lougher

[
26.187662] udev: starting version 151

[
26.698869] k8temp 0000:00:18.3: Temperature readouts might be wrong -
check erratum #141

[
26.737462] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

[
26.753669] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8450,
revision 0

[
26.882311] EDAC MC: Ver: 2.1.0 Apr 16 2010

[
26.895117] EDAC amd64_edac: Ver:
3.2.0 Apr 16 2010

[
26.895274] EDAC amd64: This node reports that Memory ECC is currently
disabled, set F3x44[22] (0000:00:18.3).

[
26.895286] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module
will not load.

[
26.895288] Either enable ECC
checking or force module loading by setting 'ecc_enable_override'.

[
26.895290] (Note that use of the
override may cause unknown side effects.)

[
26.895317] amd64_edac: probe of 0000:00:18.2 failed with error -22

[
26.952598] sdhci: Secure Digital Host Controller Interface driver

[
26.952603] sdhci: Copyright(c) Pierre Ossman

[
26.978022] cfg80211: Calling CRDA to update world regulatory domain

[
27.039897] sdhci-pci 0000:05:04.2: SDHCI controller found [1217:7120]
(rev 1)

[
27.039924] sdhci-pci 0000:05:04.2: PCI INT A -> GSI 20 (level, low)
-> IRQ 20

[
27.039968] mmc0: Unknown controller version (16). You may experience
problems.

[
27.040523] Registered led device: mmc0::

[ 27.040656] mmc0: SDHCI controller on PCI
[0000:05:04.2] using PIO

[
27.244167] alloc irq_desc for 23
on node 0

[
27.244172] alloc kstat_irqs on
node 0

[
27.244182] ath5k 0000:05:03.0: PCI INT A -> GSI 23 (level, low) ->
IRQ 23

[
27.244244] ath5k 0000:05:03.0: registered as 'phy0'

[
27.479690] cfg80211: World regulatory domain updated:

[
27.479698] (start_freq -
end_freq @ bandwidth), (max_antenna_gain, max_eirp)

[
27.479703] (2402000 KHz -
2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[
27.479706] (2457000 KHz -
2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)

[
27.479709] (2474000 KHz -
2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)

[
27.479713] (5170000 KHz -
5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[
27.479716] (5735000 KHz -
5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[
27.736946] input: PS/2 Logitech Wheel Mouse as
/devices/platform/i8042/serio4/input/input7

[
27.842600] ath: EEPROM regdomain: 0x30

[
27.842603] ath: EEPROM indicates we should expect a direct regpair map

[
27.842606] ath: Country alpha2 being used: AM

[
27.842608] ath: Regpair used: 0x30

[
27.845815] eth0: link down

[
27.846340] ADDRCONF(NETDEV_UP): eth0: link is not ready

[
27.865718] phy0: Selected rate control algorithm 'minstrel'

[
27.866619] ath5k phy0: Atheros AR2413 chip found (MAC: 0x78, PHY: 0x45)

[
27.866740] cfg80211: Calling CRDA for country: AM

[
27.875654] cfg80211: Regulatory domain changed to country: AM

[
27.875659] (start_freq -
end_freq @ bandwidth), (max_antenna_gain, max_eirp)

[
27.875663] (2402000 KHz -
2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)

[
27.875667] (5170000 KHz -
5250000 KHz @ 20000 KHz), (N/A, 1800 mBm)

[
27.875670] (5250000 KHz -
5330000 KHz @ 20000 KHz), (N/A, 1800 mBm)

[
28.020577] ADDRCONF(NETDEV_UP): wlan0: link is not ready

[
28.158230] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low)
-> IRQ 16

[
28.517635] hda_codec: ALC883: BIOS auto-probing.

[
28.518424] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input8

[
29.242366] cfg80211: Found new beacon on frequency: 2467 MHz (Ch 12) on
phy0

[
29.645912] lp: driver loaded but no devices found

[
29.719879] ppdev: user-space parallel port driver

[
66.088721] EXT4-fs (sda3): mounted filesystem with ordered data mode

[
92.312555] Clocksource tsc unstable (delta = -180386712 ns)

Συνδεθείτε ή εγγραφείτε για να σχολιάσετε

ubuntu@ubuntu:~$ iwconfig

lo
no wireless extensions.

eth0
no wireless extensions.

wlan0
IEEE 802.11bg ESSID:off/any

Mode:Managed Access Point:
Not-Associated Tx-Power=20 dBm

Retry long limit:7 RTS thr:off
Fragment thr:off

Power Management:off

Συνδεθείτε ή εγγραφείτε για να σχολιάσετε

Η καρτα σου ειναι αυτη

05:03.0 Ethernet controller [0200]: Atheros Communications Inc. AR2413 802.11bg NIC [168c:001a] (rev 01)

Το προβλημα εχει αναφερθει με την καρτα σου!

Πες μας πως εχεις κανει την εγκατασταση, κανονικα ή μεσα απο τα παραθυρα (wubi) ?

Κανε τις ρυθμισεις στις Πηγες Λογισμικου, οπως λεει το βιντεο εδω http://www.greeklug.gr/uploads/ubuntu/videos/prota_vimata.ogv

και μετα κανε ενα update.

Μετα δοκιμασε να κανεις μια Εποανεκκινηση, και δες αν ειναι ενταξει μετα απο αυτο!

Αν οχι, δωσε τα αποτελεσματα των εντολων

rfkill list

lsmod

Συνδεθείτε ή εγγραφείτε για να σχολιάσετε

Ok euxaristw~!

Tha to tsekarw otan girisw apo tin doulia!!

Fortosa to live cd se ena usb kai ekana boot apo to usb.

To programa pou xrisimopoiisia einai auto.

P.s. Sorry gia ta greeklish alla den exw ellinika edw!

Συνδεθείτε ή εγγραφείτε για να σχολιάσετε

Oκ λοιπον τα εκανα εγκατασταση για να τελειωνουμε!!!!

Αλλα δεν εκανα τιποτα ακομα απο τα βηματα.

Εχω μια ερωτηση. στις συνδεσεις στην καρτλα ντι-ες-ελ μπορω να επιλεξω pppoe manual κατι. Μηπως εκει αμα βαλω ip,netmask subnet kai κατι αλλα που ζηταει για το access point

μηπως συνδεθει??????????????

Αλλα πως μπορω να βρω αυτες τις πληροφοριες απο windows

Μηπως με ipconfig?

Συνδεθείτε ή εγγραφείτε για να σχολιάσετε

aggelos@aggelos-laptop:~$ rfkill list

0: phy0: Wireless LAN

Soft
blocked: no

Hard
blocked: no

aggelos@aggelos-laptop:~$ lsmod

Module Size Used by

binfmt_misc 7960 1

ppdev 6375 0

snd_hda_codec_realtek 278890
1

snd_hda_codec_si3054 4236
1

fbcon 39270 71

tileblit 2487 1 fbcon

font 8053 1 fbcon

bitblit 5811 1 fbcon

softcursor 1565 1 bitblit

vga16fb 12757 0

vgastate 9857 1 vga16fb

snd_hda_intel 25645
4

snd_hda_codec 85727
3 snd_hda_codec_realtek,snd_hda_codec_si3054,snd_hda_intel

snd_hwdep 6924 1 snd_hda_codec

snd_pcm_oss 41394
0

snd_mixer_oss 16299
1 snd_pcm_oss

snd_pcm 87850 6
snd_hda_codec_si3054,snd_hda_intel,snd_hda_codec,snd_pcm_oss

snd_seq_dummy 1782
0

arc4 1473 2

snd_seq_oss 31219 0

snd_seq_midi 5829 0

snd_rawmidi 23388 1 snd_seq_midi

snd_seq_midi_event 7267
2 snd_seq_oss,snd_seq_midi

snd_seq 57417 6
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event

radeon 739595 2

snd_timer 23553 2 snd_pcm,snd_seq

snd_seq_device 6824
5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq

ath5k 134437 0

ttm 60815 1 radeon

drm_kms_helper 30742
1 radeon

mac80211 238128 1 ath5k

ath 9723 1 ath5k

video 20623 0

output 2503 1 video

snd 70978 19
snd_hda_codec_realtek,snd_hda_codec_si3054,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,

snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device

drm 198770 4 radeon,ttm,drm_kms_helper

i2c_algo_bit 6024 1 radeon

sdhci_pci 6700 0

sdhci 17928
1 sdhci_pci

cfg80211 148386 3 ath5k,mac80211,ath

led_class 3732 2 ath5k,sdhci

psmouse 64608 0

serio_raw 4918 0

i2c_piix4 9639 0

soundcore 8052 1 snd

snd_page_alloc 8500
2 snd_hda_intel,snd_pcm

edac_core 45423 0

edac_mce_amd 9214 0

shpchp 33679 0

k8temp 3912 0

lp 9336 0

parport 37160 2
ppdev,lp

8139too 22245 0

8139cp 19541 0

ohci1394 30260 0

usb_storage 49833 0

mii 5237 2 8139too,8139cp

ieee1394 94675 1 ohci1394

pata_atiixp 4209 0

sata_sil 8895 5

aggelos@aggelos-laptop:~$ lsmod

Module Size Used by

binfmt_misc 7960 1

ppdev 6375 0

snd_hda_codec_realtek 278890
1

snd_hda_codec_si3054 4236
1

fbcon 39270 71

tileblit 2487 1 fbcon

font 8053 1 fbcon

bitblit 5811 1 fbcon

softcursor 1565 1 bitblit

vga16fb 12757 0

vgastate 9857
1 vga16fb

snd_hda_intel 25645
4

snd_hda_codec 85727
3 snd_hda_codec_realtek,snd_hda_codec_si3054,snd_hda_intel

snd_hwdep 6924 1 snd_hda_codec

snd_pcm_oss 41394 0

snd_mixer_oss 16299
1 snd_pcm_oss

snd_pcm 87850 6
snd_hda_codec_si3054,snd_hda_intel,snd_hda_codec,snd_pcm_oss

snd_seq_dummy 1782
0

arc4 1473 2

snd_seq_oss 31219 0

snd_seq_midi 5829 0

snd_rawmidi 23388 1 snd_seq_midi

snd_seq_midi_event 7267
2 snd_seq_oss,snd_seq_midi

snd_seq 57417 6
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event

radeon 739595 2

snd_timer 23553 2 snd_pcm,snd_seq

snd_seq_device 6824
5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq

ath5k 134437 0

ttm 60815 1 radeon

drm_kms_helper 30742
1 radeon

mac80211 238128 1 ath5k

ath 9723 1 ath5k

video 20623 0

output 2503 1 video

snd 70978 19
snd_hda_codec_realtek,snd_hda_codec_si3054,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,

snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device

drm 198770 4 radeon,ttm,drm_kms_helper

i2c_algo_bit 6024 1 radeon

sdhci_pci 6700 0

sdhci 17928 1 sdhci_pci

cfg80211 148386
3 ath5k,mac80211,ath

led_class 3732 2 ath5k,sdhci

psmouse 64608 0

serio_raw 4918 0

i2c_piix4 9639 0

soundcore 8052 1 snd

snd_page_alloc 8500
2 snd_hda_intel,snd_pcm

edac_core 45423 0

edac_mce_amd 9214 0

shpchp 33679 0

k8temp 3912 0

lp 9336 0

parport 37160 2 ppdev,lp

8139too 22245 0

8139cp 19541 0

ohci1394 30260 0

usb_storage 49833 0

mii 5237 2 8139too,8139cp

ieee1394 94675 1 ohci1394

pata_atiixp 4209 0

sata_sil 8895
5

aytaaaaaaa....

Συνδεθείτε ή εγγραφείτε για να σχολιάσετε

Η καρτα σου υποστηριζεται απο τον οδηγο ath5k δες εδω http://linuxwireless.org/en/users/Drivers/ath5k#supported_chips

ανοιξε τερματικο και εκτελεσε

sudo modprobe ath5k

και δες αν ειναι ενταξει, και δωσε το αποτελεσμα απο

iwconfig

sudo iwlist scan

Συνδεθείτε ή εγγραφείτε για να σχολιάσετε

Πρεπει να κατεβάσω κατι από το σαιτ???

Η να εκτελέσω μονο τις εντολες?

Συνδεθείτε ή εγγραφείτε για να σχολιάσετε

aggelos@aggelos-laptop:~$ sudo modprobe ath5k

aggelos@aggelos-laptop:~$ iwconfig

lo no wireless extensions.

eth0 no wireless extensions.

wlan0 IEEE 802.11bg ESSID:"kpsw_1"

Mode:Managed Frequency:2.412 GHz Access Point: 00:40:96:A0:66:F8

Bit Rate=11 Mb/s Tx-Power=20 dBm

Retry long limit:7 RTS thr:off Fragment thr:off

Power Management:off

Link Quality=41/70 Signal level=-69 dBm

Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0

Tx excessive retries:0 Invalid misc:0 Missed beacon:0

aggelos@aggelos-laptop:~$ sudo iwlist scan

lo Interface doesn't support scanning.

eth0 Interface doesn't support scanning.

wlan0 Scan completed :

Cell 01 - Address: 00:40:96:A0:66:F8

Channel:1

Frequency:2.412 GHz (Channel 1)

Quality=37/70 Signal level=-73 dBm

Encryption key:off

ESSID:"kpsw_1"

Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s

Mode:Master

Extra:tsf=000000c1fec0119e

Extra: Last beacon: 130ms ago

IE: Unknown: 00066B7073775F31

IE: Unknown: 010482848B96

IE: Unknown: 030101

IE: Unknown: 851E040081210700FF03110061705F636973636F5F70696574726F0008000022

Cell 02 - Address: 00:14:6C:42:A6:C2

Channel:9

Frequency:2.452 GHz (Channel 9)

Quality=17/70 Signal level=-93 dBm

Encryption key:on

ESSID:"JSKT"

Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s

12 Mb/s; 24 Mb/s; 36 Mb/s

Bit Rates:9 Mb/s; 18 Mb/s; 48 Mb/s; 54 Mb/s

Mode:Master

Extra:tsf=0000000506c93181

Extra: Last beacon: 1990ms ago

IE: Unknown: 00044A534B54

IE: Unknown: 010882848B960C183048

IE: Unknown: 030109

IE: Unknown: 2A0100

IE: Unknown: 32041224606C

IE: IEEE 802.11i/WPA2 Version 1

Group Cipher : TKIP

Pairwise Ciphers (2) : TKIP CCMP

Authentication Suites (1) : PSK

Preauthentication Supported

IE: WPA Version 1

Group Cipher : TKIP

Pairwise Ciphers (2) : TKIP CCMP

Authentication Suites (1) : PSK

IE: Unknown: DD0900037F0101000EFF7F

IE: Unknown: DD1A00037F030100000000146C42A6C202146C42A6C264002C010E08

IE: Unknown: DD180050F2020101000003A4000027A4000042435E0062322F00

Cell 03 - Address: 00:0E:2E:AF:DC:F9

Channel:12

Frequency:2.467 GHz (Channel 12)

Quality=19/70 Signal level=-91 dBm

Encryption key:on

ESSID:"Noone rly comes in"

Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s

9 Mb/s; 12 Mb/s; 18 Mb/s

Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s

Mode:Master

Extra:tsf=0000001833f2819c

Extra: Last beacon: 760ms ago

IE: Unknown: 00124E6F6F6E6520726C7920636F6D657320696E

IE: Unknown: 010882840B160C121824

IE: Unknown: 03010C

IE: Unknown: 2A0100

IE: Unknown: 32043048606C

IE: WPA Version 1

Group Cipher : TKIP

Pairwise Ciphers (1) : TKIP

Authentication Suites (1) : PSK

IE: IEEE 802.11i/WPA2 Version 1

Group Cipher : TKIP

Pairwise Ciphers (1) : CCMP

Authentication Suites (1) : PSK

IE: Unknown: DD0700E04C01020300

Cell 04 - Address: 00:1F:33:C5:53:52

Channel:11

Frequency:2.462 GHz (Channel 11)

Quality=14/70 Signal level=-96 dBm

Encryption key:on

ESSID:"NETGEAR"

Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s

12 Mb/s; 24 Mb/s; 36 Mb/s

Bit Rates:9 Mb/s; 18 Mb/s; 48 Mb/s; 54 Mb/s

Mode:Master

Extra:tsf=000000045449e181

Extra: Last beacon: 1170ms ago

IE: Unknown: 00074E455447454152

IE: Unknown: 010882848B960C183048

IE: Unknown: 03010B

IE: Unknown: 050400010000

IE: Unknown: 2A0102

IE: Unknown: 32041224606C

IE: WPA Version 1

Group Cipher : TKIP

Pairwise Ciphers (1) : TKIP

Authentication Suites (1) : PSK

Cell 05 - Address: 00:19:5B:DC:C9:7A

Channel:6

Frequency:2.437 GHz (Channel 6)

Quality=19/70 Signal level=-91 dBm

Encryption key:on

ESSID:"dlink"

Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s

Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s

36 Mb/s; 48 Mb/s; 54 Mb/s

Mode:Master

Extra:tsf=000000d59e98bcf0

Extra: Last beacon: 3190ms ago

IE: Unknown: 0005646C696E6B

IE: Unknown: 010482848B96

IE: Unknown: 030106

IE: Unknown: 2A0102

IE: Unknown: 32080C1218243048606C

Cell 06 - Address: 00:27:19:E9:EE:D0

Channel:6

Frequency:2.437 GHz (Channel 6)

Quality=20/70 Signal level=-90 dBm

Encryption key:on

ESSID:"klony2902"

Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s

12 Mb/s; 24 Mb/s; 36 Mb/s

Bit Rates:9 Mb/s; 18 Mb/s; 48 Mb/s; 54 Mb/s

Mode:Master

Extra:tsf=000003905276e219

Extra: Last beacon: 3190ms ago

IE: Unknown: 00096B6C6F6E7932393032

IE: Unknown: 010882848B960C183048

IE: Unknown: 030106

IE: Unknown: 2A0100

IE: Unknown: 32041224606C

IE: WPA Version 1

Group Cipher : TKIP

Pairwise Ciphers (2) : TKIP CCMP

Authentication Suites (1) : PSK

aggelos@aggelos-laptop:~$

Συνδεθείτε ή εγγραφείτε για να σχολιάσετε

Θελω να διευκρινήσω κατι. Στο ρούτερ συνδεόμαι κανονικα. Μου λεει connection enstablished.

Αυτο γινεται από την αρχή. Τι καναμε με αυτες τις εντολες τωρα?

Συνδεθείτε ή εγγραφείτε για να σχολιάσετε

Μετα απο τις τελευταιες εντολες που εχεις δωσει,

αν επιλεξεις απο την Μικροεφαρμογη, στον πινακα εφαρμογων σου, Networkmanager, μπορεις να συνδεθεις?

Συνδεθείτε ή εγγραφείτε για να σχολιάσετε

Ναι.

Μπορω να συνδεθω στο ασυρματο ρουτερ με SSID KPSW_1.

Αλλά όπως και στα Windows οταν συνεομαι λεει δεν υπαρχει προσβαση στο ιντερνετ.

Πρέπει να συνδεθω μετα σε ενα δικτυο που λεει 'Συνδεση μεσω τηλεφώνου ή VPN'

(Πως βαζω εικονα???? θελω να ανεβασω μια απο το PC μου.)

Συνδεθείτε ή εγγραφείτε για να σχολιάσετε

Αυτη ειναι η ipconfig οταν ειμαι συνδεδεμένος και στα δύο "δικτυα" απο Windows

C:\Users\AGGELOS>ipconfig

Ρύθμιση παραμέτρων IP των Windows

Προσαρμογέας PPP M:

Επίθημα DNS συγκεκριμένης σύνδεσης:
Διεύθυνση IPv4. . . . . . . . . . : 10.0.0.103
Μάσκα υποδικτύου. . . . . . . . . : 255.255.255.255
Προεπιλεγμένη πύλη . . . . . . . : 0.0.0.0

Προσαρμογέας ασύρματου δικτύου LAN Σύνδεση ασύρματου δικτύου 2: