Σήμερα το πρωΐ που επιχείρησα να ανοίξω τον υπολογιστή μου, διαπίστωσα ότι, ενώ μπούταρε κανονικά, μόλις βρέθηκα στην login screen, το ποντίκι και το πληκτρολόγιο νεκρώθηκαν!!
Το ίδιο συνέβη και όταν άνοιξα το laptop! Αντίθετα, το Funtoo λειτουργεί κανονικά!
Τι κουφό είναι πάλι αυτό;
Φόρουμ
Δώσε αστέρια!
- Συνδεθείτε ή εγγραφείτε για να σχολιάσετε
Σχόλια
Έκανες κάποιο update πρόσφατα; (ειδικότερα σε πακέτα του xserver). Aφού συνέβη σε 2 υπολογιστές.
Για αρχή μπες σε init 3 και δες αν δουλεύουν.
Μια υπόθεση κάνω:
μήπως με τα update πέρασες στο Xorg 7.4 ?
αν ναι, από εκεί θα είναι το πρόβλημα, διότι κουμάντο στο Xorg 7.4 κάνει ο hal και όχι το xorg.conf.
πολύ κούπε πε πάνε να κάνουν το linux αλλά τεσπα ίσως να μην είναι αυτό. εγώ είχα τα ίδια με τις ρυθμίσεις της οθόνης ξαφνικά σε ubuntu και έψαχνα ένα μήνα μέχρι να βρω την λύση. στην δική σου περίπτωση αν η αιτία είναι αυτή η λύση είναι εδώ http://freebsdgr.blogspot.com/2009/04/xorg-74-hal.html
<- http://oliveoil.homedns.org ->
Έχω ήδη μπει σε interactive mode και εγκαταστήσει τα x11-drivers/xf86-input-keyboard και x11-drivers/xf86-input-mouse, αλλά τίποτα!
Έκανα chroot και ενημέρωση συστήματος εκ νέου, μήπως περαστεί κανένα "βελτιωτικό" πακέτο, αλλά μπα!
Οπότε, θα τσεκάρω την περίπτωση του Xorg 7.4 (μάλλον αυτό πρέπει να είναι).
------------------------------------------------------------------------------------------------
"Όταν βλέπεις τον πιγκουίνο, ξέρεις τι πρέπει να κάνεις": ΒΑΖΕΙΣ LINUX!
Γενικά μάλλον ευθύνεται ο xorg (ή ο hal) με μια μικρή περίπτωση να φταίει κάτι στον login manager. Kαι όταν λέμε φταίει ο xorg, δεν θα έψαχνα μόνο σε αυτά τα δυο πακέτα.
Ίσως κάποιο log να μας διαφωτήσει (ψάξε στο /var/log/Xorg.0.log)
Λοιπόν, έδωσα ένα
eix xorg
και μου έβγαλε ότι έχω την έκδοση 7.4! Ακολούθησα τις οδηγίες του φίλου μας από το link του rizitis, προσθέτοντας τις δύο γραμμές στο etc/rc.conf, αλλά τζίφος! Μπήκα με startx, αλλά ούτε πληκτρολόγιο, ούτε ποντίκι!
Οπότε; Επανερχόμαστε στον παλιό καλό xorg.conf, όπως συμβουλεύει μετά; Και δεν υπάρχει τελικά λύση για τον 7.4;
------------------------------------------------------------------------------------------------
"Όταν βλέπεις τον πιγκουίνο, ξέρεις τι πρέπει να κάνεις": ΒΑΖΕΙΣ LINUX!
0.1d (Mar 25, 2009)[ 5.831214] iscsi: registered transport (bnx2i)
[ 5.831281] st: Version 20081215, fixed bufsize 32768, s/g segs 256
[ 5.831472] osst :I: Tape driver with OnStream support version 0.99.4
[ 5.831474] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[ 5.836123] pata_sis 0000:00:02.5: version 0.5.2
[ 5.836347] scsi2 : pata_sis
[ 5.836726] scsi3 : pata_sis
[ 5.838111] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 5.838182] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 5.839034] Broadcom NetXtreme II CNIC Driver cnic v2.0.0 (May 21, 2009)
[ 5.839283] I2O subsystem v1.325
[ 5.839345] i2o: max drivers = 8
[ 5.839642] I2O Configuration OSM v1.323
[ 5.839994] I2O Bus Adapter OSM v1.317
[ 5.840182] I2O Block Device OSM v1.325
[ 5.840520] I2O SCSI Peripheral OSM v1.316
[ 5.840639] I2O ProcFS OSM v1.316
[ 5.840775] Fusion MPT base driver 3.04.10
[ 5.840837] Copyright (c) 1999-2008 LSI Corporation
[ 5.840905] Fusion MPT SPI Host driver 3.04.10
[ 5.841076] Fusion MPT FC Host driver 3.04.10
[ 5.841216] Fusion MPT SAS Host driver 3.04.10
[ 5.841354] Fusion MPT misc device (ioctl) driver 3.04.10
[ 5.841598] mptctl: Registered with Fusion MPT base driver
[ 5.841663] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 5.841726] Fusion MPT LAN driver 3.04.10
[ 5.842094] usbmon: debugfs is not available
[ 5.842232] usbcore: registered new interface driver usblp
[ 5.842297] Initializing USB Mass Storage driver...
[ 5.842422] usbcore: registered new interface driver usb-storage
[ 5.842488] USB Mass Storage support registered.
[ 5.842615] usbcore: registered new interface driver libusual
[ 5.842742] usbcore: registered new interface driver ums-alauda
[ 5.842870] usbcore: registered new interface driver ums-cypress
[ 5.842994] usbcore: registered new interface driver ums-datafab
[ 5.843127] usbcore: registered new interface driver ums-freecom
[ 5.843251] usbcore: registered new interface driver ums-isd200
[ 5.843374] usbcore: registered new interface driver ums-jumpshot
[ 5.843499] usbcore: registered new interface driver ums-karma
[ 5.843625] usbcore: registered new interface driver ums-onetouch
[ 5.843749] usbcore: registered new interface driver ums-sddr09
[ 5.843874] usbcore: registered new interface driver ums-sddr55
[ 5.843997] usbcore: registered new interface driver ums-usbat
[ 5.844397] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 ir$
[ 5.844927] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 5.844996] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 5.845776] mice: PS/2 mouse device common for all mice
[ 5.846882] rtc_cmos 00:02: RTC can wake from S4
[ 5.847147] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 5.847244] rtc0: alarms up to one month, 114 bytes nvram
[ 5.847383] md: linear personality registered for level -1
[ 5.847447] md: raid0 personality registered for level 0
[ 5.847509] md: raid1 personality registered for level 1
[ 5.847570] md: raid10 personality registered for level 10
[ 5.847634] md: raid6 personality registered for level 6
[ 5.847695] md: raid5 personality registered for level 5
[ 5.847757] md: raid4 personality registered for level 4
[ 5.847819] md: multipath personality registered for level -4
[ 5.847881] md: faulty personality registered for level -5
[ 5.848533] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-$
[ 5.848884] EDAC MC: Ver: 2.1.0 Feb 24 2010
[ 5.849355] EISA: Probing bus 0 at eisa.0
[ 5.849460] EISA: Detected 0 cards.
[ 5.849582] cpuidle: using governor ladder
[ 5.849644] cpuidle: using governor menu
[ 5.849860] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.$
[ 5.851939] usbcore: registered new interface driver hiddev
[ 5.852127] usbcore: registered new interface driver usbhid
[ 5.852734] usbhid: v2.6:USB HID core driver
[ 5.853538] TCP bic registered
[ 5.853606] NET: Registered protocol family 17
[ 5.853985] RPC: Registered udp transport module.
[ 5.854113] RPC: Registered tcp transport module.
[ 5.854254] Using IPI No-Shortcut mode
[ 5.854811] registered taskstats version 1
[ 5.855049] rtc_cmos 00:02: setting system clock to 2010-04-13 02:11:47 UTC $
[ 5.865125] input: AT Translated Set 2 keyboard as /devices/platform/i8042/s$
[ 5.992438] ata1.00: ATAPI: _NEC DVD_RW ND-3540A, 1.01, max UDMA/33
[ 5.998337] ata1.00: configured for UDMA/33
[ 5.999821] scsi 2:0:0:0: CD-ROM _NEC DVD_RW ND-3540A 1.01 P$
[ 6.003127] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 6.003195] Uniform CD-ROM driver Revision: 3.20
[ 6.003508] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 6.003818] sr 2:0:0:0: Attached scsi generic sg0 type 5
[ 6.173419] ata2.00: ATA-8: WDC WD2500AAJB-00WGA0, 00.02C01, max UDMA/100
[ 6.173490] ata2.00: 488397168 sectors, multi 16: LBA48
[ 6.173593] ata2.00: limited to UDMA/33 due to 40-wire cable
[ 6.179638] ata2.00: configured for UDMA/33
[ 6.179862] scsi 3:0:0:0: Direct-Access ATA WDC WD2500AAJB-0 00.0 P$
[ 6.180347] sd 3:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 6.180513] sd 3:0:0:0: [sda] Write Protect is off
[ 6.180577] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.180619] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doe$
[ 6.180922] sda:
[ 6.181385] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 6.185875] sda1 sda2 sda3
[ 6.191950] sd 3:0:0:0: [sda] Attached SCSI disk
[ 6.192047] Freeing unused kernel memory: 592k freed
[ 6.578994] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i804$
[ 6.908017] scsi: <fdomain> Detection failed (no card)
[ 7.065140] imm: Version 2.05 (for Linux 2.4.0)
[ 7.284751] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 7.352423] uhci_hcd: USB Universal Host Controller Interface driver
[ 7.403680] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 7.403765] alloc irq_desc for 20 on node -1
[ 7.403769] alloc kstat_irqs on node -1
[ 7.403781] ohci_hcd 0000:00:02.2: PCI INT D -> GSI 20 (level, low) -> IRQ 20
[ 7.403809] ohci_hcd 0000:00:02.2: OHCI Host Controller
------------------------------------------------------------------------------------------------
"Όταν βλέπεις τον πιγκουίνο, ξέρεις τι πρέπει να κάνεις": ΒΑΖΕΙΣ LINUX!
[ 7.403853] ohci_hcd 0000:00:02.2: new USB bus registered, assigned bus numb$[ 7.403890] ohci_hcd 0000:00:02.2: irq 20, io mem 0xdfffe000
[ 7.456981] usb usb1: configuration #1 chosen from 1 choice
[ 7.457571] hub 1-0:1.0: USB hub found
[ 7.457592] hub 1-0:1.0: 3 ports detected
[ 7.458299] alloc irq_desc for 23 on node -1
[ 7.458304] alloc kstat_irqs on node -1
[ 7.458315] ohci_hcd 0000:00:02.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 7.458346] ohci_hcd 0000:00:02.3: OHCI Host Controller
[ 7.458366] ohci_hcd 0000:00:02.3: new USB bus registered, assigned bus numb$
[ 7.458399] ohci_hcd 0000:00:02.3: irq 23, io mem 0xdffff000
[ 7.511948] usb usb2: configuration #1 chosen from 1 choice
[ 7.512546] hub 2-0:1.0: USB hub found
[ 7.512565] hub 2-0:1.0: 3 ports detected
[ 7.568715] sl811: driver sl811-hcd, 19 May 2005
[ 7.831515] Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
[ 7.831521] Copyright (c) 1999-2006 Intel Corporation.
[ 11.055742] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 11.055749] EXT3-fs: write access will be enabled during recovery.
[ 16.984708] kjournald starting. Commit interval 5 seconds
[ 16.984741] EXT3-fs: recovery complete.
[ 16.985499] EXT3-fs: mounted filesystem with writeback data mode.
[ 18.970829] udev: starting version 149
[ 19.233961] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 19.297741] parport_pc 00:0a: reported by Plug and Play ACPI
[ 19.297853] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 19.307661] gameport: NS558 PnP Gameport is pnp00:0b/gameport0, io 0x200, speed 755kHz
[ 19.524365] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 19.544818] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 19.605502] agpgart-sis 0000:00:00.0: SiS chipset [1039/0645]
[ 19.611162] agpgart-sis 0000:00:00.0: AGP aperture is 64M @ 0xe0000000
[ 19.690003] epl: module is from the staging directory, the quality is unknown, you have been warned.
[ 19.694228] EPL: + EplLinInit...
[ 19.694233] EPL: Driver build: Feb 24 2010 / 11:03:59
[ 19.694237] EPL: Installing Driver 'systec_epl', Version V1.3 r0...
[ 19.694243] EPL: Driver 'systec_epl' installed successful, assigned MajorNumber=246
[ 19.694265] EPL: - EplLinInit (iRet=0)
[ 19.740401] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00
[ 19.740411] ACPI: I/O resource 0000:00:02.1 [0xc00-0xc1f] conflicts with ACPI region SMRG [0xc00-0xc1f]
[ 19.740416] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 19.861322] alloc irq_desc for 21 on node -1
[ 19.861328] alloc kstat_irqs on node -1
[ 19.861340] Intel ICH 0000:00:02.7: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 19.931546] ppdev: user-space parallel port driver
[ 19.942330] 8139too Fast Ethernet driver 0.9.28
[ 20.173055] intel8x0_measure_ac97_clock: measured 50051 usecs (2407 samples)
[ 20.173061] intel8x0: clocking to 48000
[ 20.174520] alloc irq_desc for 16 on node -1
[ 20.174526] alloc kstat_irqs on node -1
[ 20.174540] 8139too 0000:00:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 20.174983] eth0: RealTek RTL8139 at 0xf875cf00, 00:11:6b:95:0e:b0, IRQ 16
[ 20.236541] <6>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 20.802335] EXT3 FS on sda3, internal journal
[ 22.285893] Adding 522104k swap on /dev/sda2. Priority:-1 extents:1 across:522104k
^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^$
^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^$
[ 0.000000] Linux version 2.6.31-gentoo-r10 (root@gentoo) (gcc version 4.3.4$
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff8000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003fff8000 - 0000000040000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffee0000 - 00000000fff0ffff (reserved)
[ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) $
[ 0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 base 0E0000000 mask FFC000000 write-combining
[ 0.000000] 7 base 0E0000000 mask FFC000000 write-combining
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 02000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
[ 0.000000] RAMDISK: 37eba000 - 37fef859
[ 0.000000] Allocated new RAMDISK: 00100000 - 00235859
[ 0.000000] Move RAMDISK from 0000000037eba000 - 0000000037fef858 to 00100000 - 00235858
[ 0.000000] ACPI: RSDP 000fa240 00014 (v00 AMI )
[ 0.000000] ACPI: RSDT 3fff0000 0002C (v01 AMIINT SiS645XX 00000010 MSFT 0100000B)
[ 0.000000] ACPI: FACP 3fff0030 00081 (v01 AMIINT SiS645XX 00000011 MSFT 0100000B)
[ 0.000000] ACPI: DSDT 3fff0110 03659 (v01 SiS 645 00001000 MSFT 0100000D)
[ 0.000000] ACPI: FACS 3fff8000 00040
[ 0.000000] ACPI: APIC 3fff00c0 00050 (v01 AMIINT SiS645XX 00001000 MSFT 0100000B)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 135MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00011000 - 00017f00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 0001bed630] TEXT DATA BSS ==> [0001000000 - 0001bed630]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #5 [0001bee000 - 0001bf627c] BRK ==> [0001bee000 - 0001bf627c]
[ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] #7 [0000100000 - 0000235859] NEW RAMDISK ==> [0000100000 - 0000235859]
[ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
[ 0.000000] found SMP MP-table at [c00fb960] fb960
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0003fff0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003fff0
[ 0.000000] On node 0 totalpages: 262015
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 272 pages used for memmap
[ 0.000000] HighMem zone: 34530 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages at c23fd000, static data 29436 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259967
[ 0.000000] Kernel command line: root=/dev/ram0 init=/linuxrc ramdisk=8192 real_root=/dev/sda3
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000377fe:0003fff0)
[ 0.000000] Memory: 1025140k/1048512k available (7076k kernel code, 22572k reserved, 4109k data, 592k init, 139208k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc1aed000 - 0xc1b81000 ( 592 kB)
[ 0.000000] .data : 0xc16e92d4 - 0xc1aeca1c (4109 kB)
[ 0.000000] .text : 0xc1000000 - 0xc16e92d4 (7076 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:2304 nr_irqs:256
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2000.191 MHz processor.
[ 0.000999] Console: colour VGA+ 80x25
[ 0.000999] console [tty0] enabled
[ 0.000999] ram_console: buffer (null), invalid size 0, datasize 4294967284
[ 0.000999] allocated 5242880 bytes of page_cgroup
[ 0.000999] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.001022] Calibrating delay loop (skipped), value calculated using timer fequency.. 4000.38 BogoMIPS (lpj=2000191)
[ 0.001182] Security Framework initialized
[ 0.001258] Mount-cache hash table entries: 512
[ 0.001567] Initializing cgroup subsys ns
[ 0.001635] Initializing cgroup subsys cpuacct
[ 0.001701] Initializing cgroup subsys memory
[ 0.001775] Initializing cgroup subsys devices
[ 0.001838] Initializing cgroup subsys freezer
[ 0.001900] Initializing cgroup subsys net_cls
[ 0.002026] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 0.002123] CPU: L2 cache: 512K
[ 0.002183] CPU: Hyper-Threading is disabled
[ 0.002249] mce: CPU supports 4 MCE banks
[ 0.002323] CPU0: Thermal monitoring enabled (TM1)
[ 0.002403] Performance Counters: no PMU driver, software counters only.
[ 0.002508] Checking 'hlt' instruction... OK.
[ 0.007649] SMP alternatives: switching to UP code
[ 0.029503] Freeing SMP alternatives: 46k freed
[ 0.029607] ACPI: Core revision 20090521
[ 0.038994] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.049167] CPU0: Intel(R) Pentium(R) 4 CPU 2.00GHz stepping 04
------------------------------------------------------------------------------------------------
"Όταν βλέπεις τον πιγκουίνο, ξέρεις τι πρέπει να κάνεις": ΒΑΖΕΙΣ LINUX!
[ 0.049992] Brought up 1 CPUs[ 0.049992] Total of 1 processors activated (4000.38 BogoMIPS).
[ 0.049992] CPU0 attaching NULL sched-domain.
[ 0.049992] xor: automatically using best checksumming function: pIII_sse
[ 0.053997] pIII_sse : 2564.000 MB/sec
[ 0.054059] xor: using function: pIII_sse (2564.000 MB/sec)
[ 0.054124] regulator: core version 0.5
[ 0.054305] NET: Registered protocol family 16
[ 0.054984] EISA bus registered
[ 0.055006] ACPI: bus type pci registered
[ 0.058544] PCI: PCI BIOS revision 2.10 entry at 0xfdb31, last bus=1
[ 0.058610] PCI: Using configuration type 1 for base access
[ 0.072167] bio: create slab <bio-0> at 0
[ 0.073111] ACPI: EC: Look up EC in DSDT
[ 0.080217] ACPI: Interpreter enabled
[ 0.080302] ACPI: (supports S0 S1 S4 S5)
[ 0.080517] ACPI: Using IOAPIC for interrupt routing
[ 0.088067] ACPI: Power Resource [URP1] (off)
[ 0.088176] ACPI: Power Resource [URP2] (off)
[ 0.088279] ACPI: Power Resource [FDDP] (off)
[ 0.088381] ACPI: Power Resource [LPTP] (off)
[ 0.088671] ACPI: No dock devices found.
[ 0.089310] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.089503] pci 0000:00:00.0: reg 10 32bit mmio: [0xe0000000-0xe3ffffff]
[ 0.089696] pci 0000:00:02.0: Enabling SiS 96x SMBus
[ 0.089821] pci 0000:00:02.1: reg 20 io port: [0xc00-0xc1f]
[ 0.089872] pci 0000:00:02.2: reg 10 32bit mmio: [0xdfffe000-0xdfffefff]
[ 0.089946] pci 0000:00:02.3: reg 10 32bit mmio: [0xdffff000-0xdfffffff]
[ 0.090097] pci 0000:00:02.5: reg 20 io port: [0xff00-0xff0f]
[ 0.090166] pci 0000:00:02.7: reg 10 io port: [0xdc00-0xdcff]
[ 0.090177] pci 0000:00:02.7: reg 14 io port: [0xd800-0xd87f]
[ 0.090235] pci 0000:00:02.7: supports D1 D2
[ 0.090239] pci 0000:00:02.7: PME# supported from D3hot D3cold
[ 0.090307] pci 0000:00:02.7: PME# disabled
[ 0.090425] pci 0000:00:09.0: reg 10 io port: [0xd400-0xd4ff]
[ 0.090436] pci 0000:00:09.0: reg 14 32bit mmio: [0xdfffdf00-0xdfffdfff]
[ 0.090473] pci 0000:00:09.0: reg 30 32bit mmio: [0xdffc0000-0xdffdffff]
[ 0.090499] pci 0000:00:09.0: supports D1 D2
[ 0.090503] pci 0000:00:09.0: PME# supported from D1 D2 D3hot
[ 0.090569] pci 0000:00:09.0: PME# disabled
[ 0.090725] pci 0000:01:00.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff]
[ 0.090736] pci 0000:01:00.0: reg 14 io port: [0xb800-0xb8ff]
[ 0.090746] pci 0000:01:00.0: reg 18 32bit mmio: [0xdfef0000-0xdfefffff]
[ 0.090770] pci 0000:01:00.0: reg 30 32bit mmio: [0xdfec0000-0xdfedffff]
[ 0.090800] pci 0000:01:00.0: supports D1 D2
[ 0.090842] pci 0000:01:00.1: reg 10 32bit mmio: [0xc8000000-0xcfffffff]
[ 0.090853] pci 0000:01:00.1: reg 14 32bit mmio: [0xdfee0000-0xdfeeffff]
[ 0.090900] pci 0000:01:00.1: supports D1 D2
[ 0.090961] pci 0000:00:01.0: bridge io port: [0xb000-0xbfff]
[ 0.090969] pci 0000:00:01.0: bridge 32bit mmio: [0xdfe00000-0xdfefffff]
[ 0.090976] pci 0000:00:01.0: bridge 32bit mmio pref: [0xbfc00000-0xdfcfffff]
[ 0.090996] pci_bus 0000:00: on NUMA node 0
[ 0.091005] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.093290] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15)
[ 0.093860] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.094501] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.095158] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.095806] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 *11 12 14 15)
[ 0.096387] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 *10 11 12 14 15)
[ 0.096948] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.097595] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 *10 11 12 14 15)
[ 0.098532] SCSI subsystem initialized
[ 0.098657] libata version 3.00 loaded.
[ 0.099056] usbcore: registered new interface driver usbfs
[ 0.099251] usbcore: registered new interface driver hub
[ 0.099400] usbcore: registered new device driver usb
[ 0.115993] raid6: int32x1 484 MB/s
[ 0.133013] raid6: int32x2 656 MB/s
[ 0.150036] raid6: int32x4 503 MB/s
[ 0.166996] raid6: int32x8 429 MB/s
[ 0.184011] raid6: mmxx1 1652 MB/s
[ 0.200981] raid6: mmxx2 2089 MB/s
[ 0.217971] raid6: sse1x1 898 MB/s
[ 0.235006] raid6: sse1x2 1816 MB/s
[ 0.251981] raid6: sse2x1 1644 MB/s
[ 0.268984] raid6: sse2x2 2238 MB/s
[ 0.269586] raid6: using algorithm sse2x2 (2238 MB/s)
[ 0.269753] ACPI: WMI: Mapper loaded
[ 0.269814] PCI: Using ACPI for IRQ routing
[ 0.271068] pnp: PnP ACPI init
[ 0.271144] ACPI: bus type pnp registered
[ 0.276869] pnp: PnP ACPI: found 13 devices
[ 0.276937] ACPI: ACPI bus type pnp unregistered
[ 0.277022] PnPBIOS: Disabled by ACPI PNP
[ 0.312142] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.312212] pci 0000:00:01.0: IO window: 0xb000-0xbfff
[ 0.312280] pci 0000:00:01.0: MEM window: 0xdfe00000-0xdfefffff
[ 0.312348] pci 0000:00:01.0: PREFETCH window: 0xbfc00000-0xdfcfffff
[ 0.312429] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.312435] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.312440] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff]
[ 0.312444] pci_bus 0000:01: resource 1 mem: [0xdfe00000-0xdfefffff]
[ 0.312449] pci_bus 0000:01: resource 2 pref mem [0xbfc00000-0xdfcfffff]
[ 0.312479] NET: Registered protocol family 2
[ 0.312593] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.312890] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.314189] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.314949] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.315060] TCP reno registered
[ 0.315276] NET: Registered protocol family 1
[ 0.315435] Trying to unpack rootfs image as initramfs...
[ 0.392886] Freeing initrd memory: 1238k freed
[ 0.395863] audit: initializing netlink socket (disabled)
[ 0.396011] type=2000 audit(1271151552.395:1): initialized
[ 0.396352] highmem bounce pool size: 64 pages
[ 0.396421] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.401345] VFS: Disk quotas dquot_6.5.2
[ 0.401526] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.402867] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.404942] Installing knfsd (copyright (C) 1996 [email protected]).
[ 0.406230] NTFS driver 2.1.29 [Flags: R/W].
[ 0.406628] ROMFS MTD (C) 2007 Red Hat, Inc.
[ 0.406876] QNX4 filesystem 0.2.3 registered.
[ 0.407078] fuse init (API version 7.12)
[ 0.407708] JFS: nTxBlock = 8021, nTxLock = 64173
[ 0.415087] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 0.416375] SGI XFS Quota Management subsystem
[ 0.416959] Btrfs loaded
[ 0.417031] msgmni has been set to 1733
[ 0.417777] alg: No test for stdrng (krng)
[ 0.417848] async_tx: api initialized (async)
[ 0.418190] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.418280] io scheduler noop registered
[ 0.418340] io scheduler anticipatory registered
[ 0.418402] io scheduler deadline registered
[ 0.418592] io scheduler cfq registered (default)
[ 0.418714] pci 0000:01:00.0: Boot video device
[ 0.489886] toshiba: not a supported Toshiba laptop
[ 0.490096] Linux agpgart interface v0.103
[ 0.490736] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.490834] ACPI: Power Button [PWRF]
[ 0.491153] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.491247] ACPI: Power Button [PWRB]
[ 0.491611] processor LNXCPU:00: registered as cooling_device0
[ 0.494379] isapnp: Scanning for PnP cards...
[ 0.812830] Switched to high resolution mode on CPU 0
[ 0.851064] isapnp: No Plug & Play device found
[ 0.851130] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.095077] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.339076] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.340263] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.340860] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.341521] Floppy drive(s): fd0 is 1.44M
[ 1.356183] FDC 0 is a post-1991 82077
[ 1.360747] brd: module loaded
[ 1.362288] loop: module loaded
[ 1.362351] Compaq SMART2 Driver (v 2.6.0)
[ 1.362552] HP CISS Driver (v 3.6.20)
[ 1.363295] MM: desc_per_page = 128
[ 1.363508] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 1.363992] Loading iSCSI transport class v2.0-870.
[ 1.365116] fnic: Cisco FCoE HBA Driver, ver 1.0.0.1121
[ 1.365619] iscsi: registered transport (tcp)
[ 1.367602] Loading Adaptec I2O RAID: Version 2.4 Build 5go
[ 1.367669] Detecting Adaptec I2O RAID controllers...
[ 5.393832] Adaptec aacraid driver 1.1-5[2461]-ms
[ 5.394205] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[ 5.394589] NCR53c406a: no available ports found
[ 5.394655] sym53c416.c: Version 1.0.0-ac
[ 5.394739] qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options
[ 5.394914] QLogic Fibre Channel HBA Driver: 8.03.01-k4
[ 5.395431] iscsi: registered transport (qla4xxx)
[ 5.395565] QLogic iSCSI HBA Driver
[ 5.395626] Emulex LightPulse Fibre Channel SCSI driver 8.3.3
[ 5.395688] Copyright(c) 2004-2009 Emulex. All rights reserved.
[ 5.417027] Failed initialization of WD-7000 SCSI card!
[ 5.828339] DC390: clustering now enabled by default. If you get problems load
[ 5.828427] with "disable_clustering=1" and report to maintainers
[ 5.828646] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[ 5.828956] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[ 5.829108] megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
[ 5.829246] mpt2sas version 01.100.04.00 loaded
[ 5.829570] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[ 5.829832] 3ware Storage Controller device driver for Linux v1.26.02.002.
[ 5.829962] 3ware 9000 Storage Controller device driver for Linux v2.26.02.012.
[ 5.830134] nsp32: loading...
[ 5.830265] ipr: IBM Power RAID SCSI Device Driver version: 2.4.3 (June 10, 2009)
[ 5.830422] RocketRAID 3xxx/4xxx Controller driver v1.3 (071203)
[ 5.830550] stex: Promise SuperTrak EX Driver version: 4.6.0000.3
[ 5.830759] cxgb3i: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
[ 5.830899] iscsi: registered transport (cxgb3i)
[ 5.830968] Broadcom NetXtreme II iSCSI Driver bnx2i v2.0.1d (Mar 25, 2009)
[ 5.831124] iscsi: registered transport (bnx2i)
[ 5.831190] st: Version 20081215, fixed bufsize 32768, s/g segs 256
[ 5.831381] osst :I: Tape driver with OnStream support version 0.99.4
[ 5.831384] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[ 5.836032] pata_sis 0000:00:02.5: version 0.5.2
[ 5.836254] scsi2 : pata_sis
[ 5.836636] scsi3 : pata_sis
[ 5.838014] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 5.838084] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 5.838920] Broadcom NetXtreme II CNIC Driver cnic v2.0.0 (May 21, 2009)
[ 5.839185] I2O subsystem v1.325
[ 5.839247] i2o: max drivers = 8
[ 5.839535] I2O Configuration OSM v1.323
[ 5.839887] I2O Bus Adapter OSM v1.317
[ 5.840076] I2O Block Device OSM v1.325
[ 5.840414] I2O SCSI Peripheral OSM v1.316
[ 5.840533] I2O ProcFS OSM v1.316
[ 5.840663] Fusion MPT base driver 3.04.10
[ 5.840725] Copyright (c) 1999-2008 LSI Corporation
[ 5.840792] Fusion MPT SPI Host driver 3.04.10
[ 5.840958] Fusion MPT FC Host driver 3.04.10
[ 5.841121] Fusion MPT SAS Host driver 3.04.10
[ 5.841260] Fusion MPT misc device (ioctl) driver 3.04.10
[ 5.841501] mptctl: Registered with Fusion MPT base driver
[ 5.841568] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 5.841631] Fusion MPT LAN driver 3.04.10
[ 5.841924] usbmon: debugfs is not available
[ 5.842126] usbcore: registered new interface driver usblp
[ 5.842192] Initializing USB Mass Storage driver...
[ 5.842319] usbcore: registered new interface driver usb-storage
[ 5.842384] USB Mass Storage support registered.
[ 5.842510] usbcore: registered new interface driver libusual
[ 5.842635] usbcore: registered new interface driver ums-alauda
[ 5.842768] usbcore: registered new interface driver ums-cypress
------------------------------------------------------------------------------------------------
"Όταν βλέπεις τον πιγκουίνο, ξέρεις τι πρέπει να κάνεις": ΒΑΖΕΙΣ LINUX!
Για ρίξε μια ματιά σ'αυτό το τόπικ από το φόρουμ του gentoo και πες μας αν δούλεψε η λύση που προτείνεται.
************************
www.postokano.gr
[ 5.842893] usbcore: registered new interface driver ums-datafab[ 5.843027] usbcore: registered new interface driver ums-freecom
[ 5.843153] usbcore: registered new interface driver ums-isd200
[ 5.843277] usbcore: registered new interface driver ums-jumpshot
[ 5.843401] usbcore: registered new interface driver ums-karma
[ 5.843526] usbcore: registered new interface driver ums-onetouch
[ 5.843653] usbcore: registered new interface driver ums-sddr09
[ 5.843778] usbcore: registered new interface driver ums-sddr55
[ 5.843905] usbcore: registered new interface driver ums-usbat
[ 5.844305] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 ir$
[ 5.844841] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 5.844910] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 5.845697] mice: PS/2 mouse device common for all mice
[ 5.846806] rtc_cmos 00:02: RTC can wake from S4
[ 5.847076] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 5.847173] rtc0: alarms up to one month, 114 bytes nvram
[ 5.847308] md: linear personality registered for level -1
[ 5.847372] md: raid0 personality registered for level 0
[ 5.847434] md: raid1 personality registered for level 1
[ 5.847495] md: raid10 personality registered for level 10
[ 5.847559] md: raid6 personality registered for level 6
[ 5.847621] md: raid5 personality registered for level 5
[ 5.847683] md: raid4 personality registered for level 4
[ 5.847745] md: multipath personality registered for level -4
[ 5.847807] md: faulty personality registered for level -5
[ 5.848461] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: [email protected]
[ 5.848824] EDAC MC: Ver: 2.1.0 Feb 24 2010
[ 5.849284] EISA: Probing bus 0 at eisa.0
[ 5.849390] EISA: Detected 0 cards.
[ 5.849514] cpuidle: using governor ladder
[ 5.849575] cpuidle: using governor menu
[ 5.849808] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 5.851926] usbcore: registered new interface driver hiddev
[ 5.852071] usbcore: registered new interface driver usbhid
[ 5.852679] usbhid: v2.6:USB HID core driver
[ 5.853494] TCP bic registered
[ 5.853573] NET: Registered protocol family 17
[ 5.853961] RPC: Registered udp transport module.
[ 5.854040] RPC: Registered tcp transport module.
[ 5.854146] Using IPI No-Shortcut mode
[ 5.854675] registered taskstats version 1
[ 5.854903] rtc_cmos 00:02: setting system clock to 2010-04-13 09:39:18 UTC (1271151558)
[ 5.864344] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 5.992436] ata1.00: ATAPI: _NEC DVD_RW ND-3540A, 1.01, max UDMA/33
[ 5.998342] ata1.00: configured for UDMA/33
[ 5.999814] scsi 2:0:0:0: CD-ROM _NEC DVD_RW ND-3540A 1.01 PQ: 0 ANSI: 5
[ 6.002970] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 6.003045] Uniform CD-ROM driver Revision: 3.20
[ 6.003357] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 6.003658] sr 2:0:0:0: Attached scsi generic sg0 type 5
[ 6.166939] ata2.00: ATA-8: WDC WD2500AAJB-00WGA0, 00.02C01, max UDMA/100
[ 6.167016] ata2.00: 488397168 sectors, multi 16: LBA48
[ 6.167117] ata2.00: limited to UDMA/33 due to 40-wire cable
[ 6.173749] ata2.00: configured for UDMA/33
[ 6.173970] scsi 3:0:0:0: Direct-Access ATA WDC WD2500AAJB-0 00.0 PQ: 0 ANSI: 5
[ 6.174457] sd 3:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 6.174622] sd 3:0:0:0: [sda] Write Protect is off
[ 6.174686] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.174728] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.175039] sda:
[ 6.175485] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 6.179377] sda1 sda2 sda3
[ 6.185474] sd 3:0:0:0: [sda] Attached SCSI disk
[ 6.185562] Freeing unused kernel memory: 592k freed
[ 6.576180] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
[ 6.900786] scsi: <fdomain> Detection failed (no card)
[ 7.057707] imm: Version 2.05 (for Linux 2.4.0)
[ 7.278384] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 7.345929] uhci_hcd: USB Universal Host Controller Interface driver
[ 7.397200] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 7.397283] alloc irq_desc for 20 on node -1
[ 7.397288] alloc kstat_irqs on node -1
[ 7.397299] ohci_hcd 0000:00:02.2: PCI INT D -> GSI 20 (level, low) -> IRQ 20
[ 7.397328] ohci_hcd 0000:00:02.2: OHCI Host Controller
[ 7.397373] ohci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
[ 7.397408] ohci_hcd 0000:00:02.2: irq 20, io mem 0xdfffe000
[ 7.450992] usb usb1: configuration #1 chosen from 1 choice
[ 7.451599] hub 1-0:1.0: USB hub found
[ 7.451621] hub 1-0:1.0: 3 ports detected
[ 7.452349] alloc irq_desc for 23 on node -1
[ 7.452354] alloc kstat_irqs on node -1
[ 7.452366] ohci_hcd 0000:00:02.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 7.452398] ohci_hcd 0000:00:02.3: OHCI Host Controller
[ 7.452419] ohci_hcd 0000:00:02.3: new USB bus registered, assigned bus number 2
[ 7.452452] ohci_hcd 0000:00:02.3: irq 23, io mem 0xdffff000
[ 7.505919] usb usb2: configuration #1 chosen from 1 choice
[ 7.506501] hub 2-0:1.0: USB hub found
[ 7.506520] hub 2-0:1.0: 3 ports detected
[ 7.562630] sl811: driver sl811-hcd, 19 May 2005
[ 7.825587] Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
[ 7.825592] Copyright (c) 1999-2006 Intel Corporation.
[ 11.043234] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 11.043240] EXT3-fs: write access will be enabled during recovery.
[ 11.162067] kjournald starting. Commit interval 5 seconds
[ 11.162091] EXT3-fs: recovery complete.
[ 11.162832] EXT3-fs: mounted filesystem with writeback data mode.
[ 13.357252] udev: starting version 149
[ 13.634447] gameport: NS558 PnP Gameport is pnp00:0b/gameport0, io 0x200, speed 755kHz
[ 13.644702] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 13.697484] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 13.709993] parport_pc 00:0a: reported by Plug and Play ACPI
[ 13.710199] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 13.825581] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 13.844068] epl: module is from the staging directory, the quality is unknown, you have been warned.
[ 13.848817] EPL: + EplLinInit...
[ 13.848821] EPL: Driver build: Feb 24 2010 / 11:03:59
[ 13.848825] EPL: Installing Driver 'systec_epl', Version V1.3 r0...
[ 13.848831] EPL: Driver 'systec_epl' installed successful, assigned MajorNumber=246
[ 13.848852] EPL: - EplLinInit (iRet=0)
[ 13.950895] agpgart-sis 0000:00:00.0: SiS chipset [1039/0645]
[ 13.963204] agpgart-sis 0000:00:00.0: AGP aperture is 64M @ 0xe0000000
[ 14.144857] 8139too Fast Ethernet driver 0.9.28
[ 14.144950] alloc irq_desc for 16 on node -1
[ 14.144954] alloc kstat_irqs on node -1
[ 14.144966] 8139too 0000:00:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 14.145408] eth0: RealTek RTL8139 at 0xf8628f00, 00:11:6b:95:0e:b0, IRQ 16
[ 14.194081] <6>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 14.291437] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00
[ 14.291447] ACPI: I/O resource 0000:00:02.1 [0xc00-0xc1f] conflicts with ACPI region SMRG [0xc00-0xc1f]
[ 14.291451] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.291864] alloc irq_desc for 21 on node -1
[ 14.291870] alloc kstat_irqs on node -1
[ 14.291882] Intel ICH 0000:00:02.7: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 14.309652] ppdev: user-space parallel port driver
[ 14.604033] intel8x0_measure_ac97_clock: measured 50828 usecs (2445 samples)
[ 14.604040] intel8x0: clocking to 48000
[ 15.195988] EXT3 FS on sda3, internal journal
[ 16.589754] Adding 522104k swap on /dev/sda2. Priority:-1 extents:1 across:$
^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^$
<mime-type xmlns="http://www.freedesktop.org/standards/shared-mime-info" type="$
<!--Created automatically by update-mime-database. DO NOT EDIT!-->
<generic-icon name="document"/>
<comment>Unknown service</comment>
</mime-type>
^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^$
Boηθάει καθόλου;
------------------------------------------------------------------------------------------------
"Όταν βλέπεις τον πιγκουίνο, ξέρεις τι πρέπει να κάνεις": ΒΑΖΕΙΣ LINUX!
@jvarkas: Ο τύπος αναφέρεται σε AMD αρχιτεκτονική και εκτος αυτού,δεν κατάλαβα καν τι προτείνει! Επίσης, έχει πρόβλημα μονο με το ποντίκι, ενώ εμενα δεν δουλεύει ούτε το πληκτρολόγιο.
------------------------------------------------------------------------------------------------
"Όταν βλέπεις τον πιγκουίνο, ξέρεις τι πρέπει να κάνεις": ΒΑΖΕΙΣ LINUX!
ΟΚ, ούτε κι εγώ κατάλαβα τι παίζει, απλά το βρήκα στα γρήγορα και το έστειλα μπας και βοηθούσε...Προσωπικά δεν έχω ασχοληθεί με gentoo ούτε με το θέμα του Xorg 7.4 (δεν είμαι και άτομο που κηνυγάει τις εξελίξεις) οπότε προς το παρόν δεν έχω κάτι άλλο, θα ψάξω όμως μπας και.
************************
www.postokano.gr
Thanks!
------------------------------------------------------------------------------------------------
"Όταν βλέπεις τον πιγκουίνο, ξέρεις τι πρέπει να κάνεις": ΒΑΖΕΙΣ LINUX!
Απο τα logs του dmesg (αυτό δεν είναι; :p) δεν φορτώνει ο hal. Δώσε και το /var/log/Xorg.0.log (κατά προτίμηση σε site όπως το pastebin.com)
Όχι! Αυτό ήταν το Xorg.0.log!
------------------------------------------------------------------------------------------------
"Όταν βλέπεις τον πιγκουίνο, ξέρεις τι πρέπει να κάνεις": ΒΑΖΕΙΣ LINUX!
http://www.adslgr.com/forum/showthread.php?t=381810
Απ' ότι φαίνεται δεν είσαι ο μόνος που έχει το ίδιο πρόβλημα.
Εκτός και άν είσαι ο rpil
~~~~~~~~~~~~~~
Εγώ είμαι!
------------------------------------------------------------------------------------------------
"Όταν βλέπεις τον πιγκουίνο, ξέρεις τι πρέπει να κάνεις": ΒΑΖΕΙΣ LINUX!
To pc σου έχει μπλέξει τα μπούτια του μου φαίνεται. Τα logs του X θέλουν να γίνουν dmesg στη θέση του dmesg. Είναι μια ενδιαφέρουσα προσέγγιση. Πρόσεχε μήπως σε λίγο θέλουν να κατακτήσουν τον κόσμο.
Το πρόβλημα λύθηκε στο desktop, από το οποίο και γράφω.
Οι κινήσεις που έκανα όλες κι όλες:
1. Πρόσθεσα στο etc/rc.conf, τις γραμμές
2. Πρόσθεσα στο etc/make.conf την γραμμή
3. Πέρασα (εκ νέου) τα πακέτα των drivers ποντικιού-πληκτρολογίου
4. Ενημέρωσα (από chroot) το σύστημα
5. Έδωσα
6. Πέρασα το πακέτο x11-drivers/xf86-input-evdev
7. Reboot
Πάω τώρα για το laptop...
Επόμενος στόχος: Η κατάκτηση του κόσμου από το PC μου...
------------------------------------------------------------------------------------------------
"Όταν βλέπεις τον πιγκουίνο, ξέρεις τι πρέπει να κάνεις": ΒΑΖΕΙΣ LINUX!
Έτοιμο και το laptop! PROBLEM SOLVED!
------------------------------------------------------------------------------------------------
"Όταν βλέπεις τον πιγκουίνο, ξέρεις τι πρέπει να κάνεις": ΒΑΖΕΙΣ LINUX!