Μετά από μια νέα εγκατάσταση το σύστημα αργεί να ξεκινήσει τι φταίει;
γράφω λέξεις για να συμπληρώσω τις 25:δσφη δσφγκ κσξδφγκλ κ δφ δφ φ δ γδφος;οπ οπιποιπιοποιπιο 0ςιεο0 90890890 09σδφιθφξκηψξη κσξφλκδφξλκδφξλκ κξφκδφξκδφξσλδφξσκ φσδκφηκδφη κδφλσδφκηξ
Φόρουμ
Δώσε αστέρια!
- Συνδεθείτε ή εγγραφείτε για να σχολιάσετε
Σχόλια
Την εγκατασταση πως την εχεις κανει, κανονικα ή μεσα απο τα παραθυρα (wubi) ?
Κανε μια επανεκκινηση, και μολις μπεις δωσε τα αποτελεσματα των εντολων
Επειδη θα ειναι πολυ μεγαλα, ανεβασε τα εδω http://pastebin.gr/ αν θελεις!
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 0c)
00:01.0 PCI bridge [0604]: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port [8086:2a01] (rev 0c)
00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 03)
00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 03)
00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 03)
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 03)
00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 03)
00:1c.2 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 [8086:2843] (rev 03)
00:1c.3 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 [8086:2845] (rev 03)
00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 [8086:2847] (rev 03)
00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 03)
00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 03)
00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 03)
00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 03)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f3)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller [8086:2815] (rev 03)
00:1f.1 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 03)
00:1f.2 SATA controller [0106]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller [8086:2829] (rev 03)
00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 03)
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc M76 [Radeon Mobility HD 2600 Series] [1002:9581]
01:00.1 Audio device [0403]: ATI Technologies Inc RV630/M76 audio device [Radeon HD 2600 Series] [1002:aa08]
04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 01)
05:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] (rev 02)
0c:04.0 CardBus bridge [0607]: Texas Instruments PCIxx12 Cardbus Controller [104c:8039]
0c:04.1 FireWire (IEEE 1394) [0c00]: Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller [104c:803a]
0c:04.2 Mass storage controller [0180]: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) [104c:803b]
0c:04.3 SD Host controller [0805]: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller [104c:803c]
[ 0.334957] pci_bus 0000:02: resource 0 io: [0x3000-0x3fff]
[ 0.334960] pci_bus 0000:02: resource 1 mem: [0xf0000000-0xf3ffffff]
[ 0.334963] pci_bus 0000:02: resource 2 pref mem [0xce000000-0xcfffffff]
[ 0.334967] pci_bus 0000:04: resource 0 io: [0x4000-0x4fff]
[ 0.334970] pci_bus 0000:04: resource 1 mem: [0xf4000000-0xf7ffffff]
[ 0.334973] pci_bus 0000:04: resource 2 pref mem [0xcc000000-0xcdffffff]
[ 0.334976] pci_bus 0000:05: resource 0 io: [0x5000-0x5fff]
[ 0.334979] pci_bus 0000:05: resource 1 mem: [0xf8000000-0xfbffffff]
[ 0.334982] pci_bus 0000:05: resource 2 pref mem [0xca000000-0xcbffffff]
[ 0.334985] pci_bus 0000:06: resource 0 io: [0x6000-0x6fff]
[ 0.334988] pci_bus 0000:06: resource 1 mem: [0xc4000000-0xc7ffffff]
[ 0.334992] pci_bus 0000:06: resource 2 pref mem [0xc8000000-0xc9ffffff]
[ 0.334995] pci_bus 0000:09: resource 0 io: [0x7000-0x7fff]
[ 0.334998] pci_bus 0000:09: resource 1 mem: [0x84000000-0x841fffff]
[ 0.335001] pci_bus 0000:09: resource 2 pref mem [0x84200000-0x843fffff]
[ 0.335004] pci_bus 0000:0c: resource 0 io: [0x8000-0x8fff]
[ 0.335007] pci_bus 0000:0c: resource 1 mem: [0xfc100000-0xfc1fffff]
[ 0.335010] pci_bus 0000:0c: resource 2 pref mem [0x80000000-0x83ffffff]
[ 0.335013] pci_bus 0000:0c: resource 3 io: [0x00-0xffff]
[ 0.335016] pci_bus 0000:0c: resource 4 mem: [0x000000-0xffffffff]
[ 0.335019] pci_bus 0000:0d: resource 0 io: [0x8000-0x80ff]
[ 0.335023] pci_bus 0000:0d: resource 1 io: [0x8400-0x84ff]
[ 0.335026] pci_bus 0000:0d: resource 2 pref mem [0x80000000-0x83ffffff]
[ 0.335029] pci_bus 0000:0d: resource 3 mem: [0x88000000-0x8bffffff]
[ 0.335076] NET: Registered protocol family 2
[ 0.335202] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.335629] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.336207] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.336454] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.336457] TCP reno registered
[ 0.336567] NET: Registered protocol family 1
[ 0.336747] pci 0000:01:00.0: Boot video device
[ 0.336791] Simple Boot Flag at 0x36 set to 0x1
[ 0.337006] cpufreq-nforce2: No nForce2 chipset.
[ 0.337040] Scanning for low memory corruption every 60 seconds
[ 0.337177] audit: initializing netlink socket (disabled)
[ 0.337189] type=2000 audit(1275731854.335:1): initialized
[ 0.349259] highmem bounce pool size: 64 pages
[ 0.349266] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.351177] VFS: Disk quotas dquot_6.5.2
[ 0.351257] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.351962] fuse init (API version 7.13)
[ 0.352069] msgmni has been set to 1690
[ 0.352322] alg: No test for stdrng (krng)
[ 0.352388] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.352392] io scheduler noop registered
[ 0.352394] io scheduler anticipatory registered
[ 0.352397] io scheduler deadline registered
[ 0.352447] io scheduler cfq registered (default)
[ 0.352639] alloc irq_desc for 24 on node -1
[ 0.352642] alloc kstat_irqs on node -1
[ 0.352652] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.352661] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.352821] alloc irq_desc for 25 on node -1
[ 0.352823] alloc kstat_irqs on node -1
[ 0.352834] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.352846] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.353032] alloc irq_desc for 26 on node -1
[ 0.353034] alloc kstat_irqs on node -1
[ 0.353045] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
[ 0.353058] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.353242] alloc irq_desc for 27 on node -1
[ 0.353244] alloc kstat_irqs on node -1
[ 0.353254] pcieport 0000:00:1c.2: irq 27 for MSI/MSI-X
[ 0.353267] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.353448] alloc irq_desc for 28 on node -1
[ 0.353450] alloc kstat_irqs on node -1
[ 0.353461] pcieport 0000:00:1c.3: irq 28 for MSI/MSI-X
[ 0.353474] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.353658] alloc irq_desc for 29 on node -1
[ 0.353661] alloc kstat_irqs on node -1
[ 0.353671] pcieport 0000:00:1c.4: irq 29 for MSI/MSI-X
[ 0.353684] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.353812] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.354025] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.354179] ACPI: AC Adapter [ACAD] (on-line)
[ 0.354254] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.354303] ACPI: Lid Switch [LID0]
[ 0.354356] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.354359] ACPI: Power Button [PWRB]
[ 0.354435] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.354438] ACPI: Power Button [PWRF]
[ 0.355275] ACPI: SSDT 7fed88af 001F6 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.355880] ACPI: SSDT 7fed839f 0048B (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.358542] Monitor-Mwait will be used to enter C-1 state
[ 0.358578] Monitor-Mwait will be used to enter C-2 state
[ 0.358607] Monitor-Mwait will be used to enter C-3 state
[ 0.358614] Marking TSC unstable due to TSC halts in idle
[ 0.358678] processor LNXCPU:00: registered as cooling_device0
[ 0.359103] ACPI: SSDT 7fed8aa5 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 0.359553] ACPI: SSDT 7fed882a 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.360221] Switching to clocksource hpet
[ 0.363523] processor LNXCPU:01: registered as cooling_device1
[ 0.386272] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.387957] brd: module loaded
[ 0.388565] loop: module loaded
[ 0.388669] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 0.388789] ata_piix 0000:00:1f.1: version 2.13
[ 0.388805] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.388853] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.388948] scsi0 : ata_piix
[ 0.389036] scsi1 : ata_piix
[ 0.389759] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14
[ 0.389762] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15
[ 0.390183] Fixed MDIO Bus: probed
[ 0.390226] PPP generic driver version 2.4.2
[ 0.390272] tun: Universal TUN/TAP device driver, 1.6
[ 0.390274] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[ 0.390373] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.390396] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.390414] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.390418] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.390469] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.390506] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.394397] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.394415] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfc404800
[ 0.398373] isapnp: Scanning for PnP cards...
[ 0.417301] Freeing initrd memory: 7776k freed
[ 0.423835] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.424026] usb usb1: configuration #1 chosen from 1 choice
[ 0.424064] hub 1-0:1.0: USB hub found
[ 0.424076] hub 1-0:1.0: 4 ports detected
[ 0.424159] alloc irq_desc for 23 on node -1
[ 0.424162] alloc kstat_irqs on node -1
[ 0.424170] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.424199] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.424203] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.424248] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.424284] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.428181] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.428204] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc404c00
[ 0.445018] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.445106] usb usb2: configuration #1 chosen from 1 choice
[ 0.445138] hub 2-0:1.0: USB hub found
[ 0.445147] hub 2-0:1.0: 6 ports detected
[ 0.445228] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.445253] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.445302] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.445311] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.445315] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.445354] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.445394] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
[ 0.445503] usb usb3: configuration #1 chosen from 1 choice
[ 0.445537] hub 3-0:1.0: USB hub found
[ 0.445546] hub 3-0:1.0: 2 ports detected
[ 0.445603] alloc irq_desc for 21 on node -1
[ 0.445606] alloc kstat_irqs on node -1
[ 0.445612] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.445619] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.445624] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.445661] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.445701] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
[ 0.445810] usb usb4: configuration #1 chosen from 1 choice
[ 0.445841] hub 4-0:1.0: USB hub found
[ 0.445849] hub 4-0:1.0: 2 ports detected
[ 0.445908] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.445915] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.445920] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.445957] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 0.445988] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
[ 0.446100] usb usb5: configuration #1 chosen from 1 choice
[ 0.446131] hub 5-0:1.0: USB hub found
[ 0.446140] hub 5-0:1.0: 2 ports detected
[ 0.446194] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.446202] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.446206] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.446245] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 0.446285] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
[ 0.446400] usb usb6: configuration #1 chosen from 1 choice
[ 0.446431] hub 6-0:1.0: USB hub found
[ 0.446439] hub 6-0:1.0: 2 ports detected
[ 0.446494] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.446502] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.446506] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.446548] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 0.446580] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
[ 0.446689] usb usb7: configuration #1 chosen from 1 choice
[ 0.446720] hub 7-0:1.0: USB hub found
[ 0.446729] hub 7-0:1.0: 2 ports detected
[ 0.446855] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.474202] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.474209] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.474302] mice: PS/2 mouse device common for all mice
[ 0.474446] rtc_cmos 00:07: RTC can wake from S4
[ 0.474491] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 0.474526] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.474643] device-mapper: uevent: version 1.0.3
[ 0.474751] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: [email protected]
[ 0.474828] device-mapper: multipath: version 1.1.0 loaded
[ 0.474831] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.474962] EISA: Probing bus 0 at eisa.0
[ 0.474969] Cannot allocate resource for EISA slot 1
[ 0.474972] Cannot allocate resource for EISA slot 2
[ 0.474975] Cannot allocate resource for EISA slot 3
[ 0.474977] Cannot allocate resource for EISA slot 4
[ 0.474980] Cannot allocate resource for EISA slot 5
[ 0.474982] Cannot allocate resource for EISA slot 6
[ 0.474985] Cannot allocate resource for EISA slot 7
[ 0.474987] Cannot allocate resource for EISA slot 8
[ 0.474990] EISA: Detected 0 cards.
[ 0.475156] cpuidle: using governor ladder
[ 0.475298] cpuidle: using governor menu
[ 0.475857] TCP cubic registered
[ 0.476042] NET: Registered protocol family 10
[ 0.476618] lo: Disabled Privacy Extensions
[ 0.477051] NET: Registered protocol family 17
[ 0.477655] Using IPI No-Shortcut mode
[ 0.477744] PM: Resume from disk failed.
[ 0.477758] registered taskstats version 1
[ 0.478559] Magic number: 14:768:979
[ 0.478652] rtc_cmos 00:07: setting system clock to 2010-06-05 09:57:34 UTC (1275731854)
[ 0.478656] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.478659] EDD information not available.
[ 0.502503] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 0.541187] ACPI: Battery Slot [BAT1] (battery present)
[ 0.585414] ata1.00: ATAPI: MATSHITADVD-RAM UJ-850S, 1.40, max UDMA/33
[ 0.609333] ata1.00: configured for UDMA/33
[ 0.752848] isapnp: No Plug & Play device found
[ 0.755079] scsi 0:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-850S 1.40 PQ: 0 ANSI: 5
[ 0.760304] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 0.760308] Uniform CD-ROM driver Revision: 3.20
[ 0.760417] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 0.760477] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 0.760542] Freeing unused kernel memory: 656k freed
[ 0.761047] Write protecting the kernel text: 4676k
[ 0.761102] Write protecting the kernel read-only data: 1840k
[ 0.781640] udev: starting version 151
[ 0.821316] usb 1-3: new high speed USB device using ehci_hcd and address 2
[ 0.869151] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.869180] r8169 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.869241] r8169 0000:04:00.0: setting latency timer to 64
[ 0.869324] alloc irq_desc for 30 on node -1
[ 0.869327] alloc kstat_irqs on node -1
[ 0.869346] r8169 0000:04:00.0: irq 30 for MSI/MSI-X
[ 0.870195] eth0: RTL8101e at 0xf80a0000, 00:1e:ec:02:8e:44, XID 94200000 IRQ 30
[ 0.876996] ahci 0000:00:1f.2: version 3.0
[ 0.877055] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.877107] alloc irq_desc for 31 on node -1
[ 0.877110] alloc kstat_irqs on node -1
[ 0.877123] ahci 0000:00:1f.2: irq 31 for MSI/MSI-X
[ 0.877196] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[ 0.877200] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc
[ 0.877207] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.879191] scsi2 : ahci
[ 0.879386] scsi3 : ahci
[ 0.879535] scsi4 : ahci
[ 0.879712] ata3: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404100 irq 31
[ 0.879717] ata4: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404180 irq 31
[ 0.879721] ata5: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404200 irq 31
[ 0.971276] usb 1-3: configuration #1 chosen from 1 choice
[ 1.140071] usb 2-2: new high speed USB device using ehci_hcd and address 3
[ 1.196072] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.196103] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.274658] usb 2-2: configuration #1 chosen from 1 choice
[ 1.283354] Initializing USB Mass Storage driver...
[ 1.283511] scsi5 : SCSI emulation for USB Mass Storage devices
[ 1.283614] usbcore: registered new interface driver usb-storage
[ 1.283617] USB Mass Storage support registered.
[ 1.283624] usb-storage: device found at 3
[ 1.283626] usb-storage: waiting for device to settle before scanning
[ 1.512056] usb 5-1: new low speed USB device using uhci_hcd and address 2
[ 1.532085] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.532842] ACPI Warning for \_SB_.PCI0.SATA.PRT0._GTF: Return type mismatch - found Integer, expected Buffer (20090903/nspredef-1006)
[ 1.532852] ata3.00: _GTF unexpected object type 0x1
[ 1.690203] usb 5-1: configuration #1 chosen from 1 choice
[ 1.909165] ata3.00: ATA-8: TOSHIBA MK1646GSX, LB113M, max UDMA/100
[ 1.909174] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.910244] ata3.00: _GTF unexpected object type 0x1
[ 1.910492] ata3.00: configured for UDMA/100
[ 1.928242] scsi 2:0:0:0: Direct-Access ATA TOSHIBA MK1646GS LB11 PQ: 0 ANSI: 5
[ 1.928457] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 1.928496] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 1.928575] sd 2:0:0:0: [sda] Write Protect is off
[ 1.928579] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.928608] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.928768] sda: sda1 sda2 < sda5 >
[ 2.006420] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.011153] usbcore: registered new interface driver hiddev
[ 2.011220] usbcore: registered new interface driver usbhid
[ 2.011223] usbhid: v2.6:USB HID core driver
[ 2.015069] ohci1394 0000:0c:04.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.028371] input: USB Optical Mouse USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input5
[ 2.028482] a4tech 0003:09DA:0006.0001: input,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse USB Optical Mouse] on usb-0000:00:1d.0-1/input0
[ 2.069104] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[fc102000-fc1027ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 2.415635] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 3.340236] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f81ad42f8e8]
[ 6.280258] usb-storage: device scan complete
[ 6.281314] scsi 5:0:0:0: Direct-Access USB 2.0 USB Flash Drive 0.00 PQ: 0 ANSI: 2
[ 6.281823] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 6.282928] sd 5:0:0:0: [sdb] 31588351 512-byte logical blocks: (16.1 GB/15.0 GiB)
[ 6.283778] sd 5:0:0:0: [sdb] Write Protect is off
[ 6.283781] sd 5:0:0:0: [sdb] Mode Sense: 00 00 00 00
[ 6.283784] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 6.287402] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 6.287406] sdb: sdb1
[ 6.348284] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 6.348288] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[ 11.373957] udev: starting version 151
[ 11.489122] Adding 6034424k swap on /dev/sda5. Priority:-1 extents:1 across:6034424k
[ 11.493575] acpi device:03: registered as cooling_device2
[ 11.493822] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input6
[ 11.493880] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 11.539117] lp: driver loaded but no devices found
[ 11.721111] cfg80211: Calling CRDA to update world regulatory domain
[ 11.725574] vga16fb: initializing
[ 11.725578] vga16fb: mapped to 0xc00a0000
[ 11.725644] fb0: VGA16 VGA frame buffer device
[ 11.737021] Linux agpgart interface v0.103
[ 11.759290] sdhci: Secure Digital Host Controller Interface driver
[ 11.759294] sdhci: Copyright(c) Pierre Ossman
[ 11.765166] sdhci-pci 0000:0c:04.3: SDHCI controller found [104c:803c] (rev 0)
[ 11.765189] sdhci-pci 0000:0c:04.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 11.765262] Registered led device: mmc0::
[ 11.765302] mmc0: SDHCI controller on PCI [0000:0c:04.3] using DMA
[ 11.765401] Linux video capture interface: v2.00
[ 11.769351] uvcvideo: Found UVC 1.00 device Chicony USB 2.0 Camera (04f2:b008)
[ 11.775744] tifm_7xx1 0000:0c:04.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 11.777238] input: Chicony USB 2.0 Camera as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0/input/input7
[ 11.777348] usbcore: registered new interface driver uvcvideo
[ 11.777519] USB Video Class driver (v0.1.0)
[ 11.809049] tifm_core: MMC/SD card detected in socket 0:1
[ 11.813481] cfg80211: World regulatory domain updated:
[ 11.813485] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 11.813489] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.813492] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 11.813496] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 11.813499] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.813502] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.824998] yenta_cardbus 0000:0c:04.0: CardBus bridge found [1179:ff00]
[ 11.825024] yenta_cardbus 0000:0c:04.0: Enabling burst memory read transactions
[ 11.825031] yenta_cardbus 0000:0c:04.0: Using CSCINT to route CSC interrupts to PCI
[ 11.825034] yenta_cardbus 0000:0c:04.0: Routing CardBus interrupts to PCI
[ 11.825042] yenta_cardbus 0000:0c:04.0: TI: mfunc 0x10a01b22, devctl 0x64
[ 11.834017] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 11.834023] Disabling lock debugging due to kernel taint
[ 11.849447] type=1505 audit(1275731865.869:2): operation="profile_load" pid=686 name="/sbin/dhclient3"
[ 11.850286] type=1505 audit(1275731865.869:3): operation="profile_load" pid=686 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 11.850731] type=1505 audit(1275731865.869:4): operation="profile_load" pid=686 name="/usr/lib/connman/scripts/dhclient-script"
[ 11.981175] [fglrx] Maximum main memory to use for locked dma buffers: 1885 MBytes.
[ 11.987210] [fglrx] vendor: 1002 device: 9581 count: 1
[ 12.009319] [fglrx] ioport: bar 1, base 0x2000, size: 0x100
[ 12.009348] pci 0000:01:00.0: power state changed by ACPI to D0
[ 12.009360] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 12.009368] pci 0000:01:00.0: setting latency timer to 64
[ 12.009992] [fglrx] Kernel PAT support is enabled
[ 12.010020] [fglrx] module loaded - fglrx 8.72.11 [Apr 8 2010] with 1 minors
[ 12.051029] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
[ 12.051032] iwl3945: Copyright(c) 2003-2009 Intel Corporation
[ 12.051157] iwl3945 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 12.051173] iwl3945 0000:05:00.0: setting latency timer to 64
[ 12.068312] yenta_cardbus 0000:0c:04.0: ISA IRQ mask 0x0cf8, PCI irq 16
[ 12.068316] yenta_cardbus 0000:0c:04.0: Socket status: 30000006
[ 12.068321] pci_bus 0000:0c: Raising subordinate bus# of parent bus (#0c) from #0d to #10
[ 12.068331] yenta_cardbus 0000:0c:04.0: pcmcia: parent PCI bridge I/O window: 0x8000 - 0x8fff
[ 12.068334] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x8000-0x8fff: clean.
[ 12.068628] yenta_cardbus 0000:0c:04.0: pcmcia: parent PCI bridge Memory window: 0xfc100000 - 0xfc1fffff
[ 12.068631] yenta_cardbus 0000:0c:04.0: pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x83ffffff
[ 12.161772] Console: switching to colour frame buffer device 80x30
[ 12.208095] iwl3945 0000:05:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 12.208100] iwl3945 0000:05:00.0: Detected Intel Wireless WiFi Link 3945ABG
[ 12.208223] alloc irq_desc for 32 on node -1
[ 12.208226] alloc kstat_irqs on node -1
[ 12.208261] iwl3945 0000:05:00.0: irq 32 for MSI/MSI-X
[ 12.216293] alloc irq_desc for 22 on node -1
[ 12.216297] alloc kstat_irqs on node -1
[ 12.216306] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 12.216350] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 12.228486] phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 12.330309] hda_codec: ALC268: BIOS auto-probing.
[ 12.330787] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[ 12.342823] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 12.342870] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 12.394395] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[ 12.396619] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 12.397544] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 12.398306] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 12.399275] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 12.432751] type=1505 audit(1275731866.453:5): operation="profile_load" pid=866 name="/usr/share/gdm/guest-session/Xsession"
[ 12.438497] type=1505 audit(1275731866.457:6): operation="profile_replace" pid=868 name="/sbin/dhclient3"
[ 12.439336] type=1505 audit(1275731866.457:7): operation="profile_replace" pid=868 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 12.439789] type=1505 audit(1275731866.457:8): operation="profile_replace" pid=868 name="/usr/lib/connman/scripts/dhclient-script"
[ 12.449940] type=1505 audit(1275731866.469:9): operation="profile_load" pid=871 name="/usr/bin/evince"
[ 12.483165] type=1505 audit(1275731866.501:10): operation="profile_load" pid=871 name="/usr/bin/evince-previewer"
[ 12.490001] type=1505 audit(1275731866.509:11): operation="profile_load" pid=871 name="/usr/bin/evince-thumbnailer"
[ 12.516973] r8169: eth0: link down
[ 12.517250] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.531372] iwl3945 0000:05:00.0: firmware: requesting iwlwifi-3945-2.ucode
[ 12.558775] iwl3945 0000:05:00.0: loaded firmware version 15.32.2.9
[ 12.632783] Registered led device: iwl-phy0::radio
[ 12.632808] Registered led device: iwl-phy0::assoc
[ 12.632828] Registered led device: iwl-phy0::RX
[ 12.632848] Registered led device: iwl-phy0::TX
[ 12.646085] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 12.855684] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
[ 12.909778] ppdev: user-space parallel port driver
[ 12.932159] Synaptics Touchpad, model: 1, fw: 6.5, id: 0x82e0b1, caps: 0xb04711/0xe0440d
[ 12.932167] synaptics: Toshiba Satellite A200 detected, limiting rate to 40pps.
[ 13.031656] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
[ 13.369685] alloc irq_desc for 33 on node -1
[ 13.369689] alloc kstat_irqs on node -1
[ 13.369705] fglrx_pci 0000:01:00.0: irq 33 for MSI/MSI-X
[ 13.370590] [fglrx] Firegl kernel thread PID: 1181
[ 13.370804] [fglrx] IRQ 33 Enabled
[ 13.917226] [fglrx] Gart USWC size:627 M.
[ 13.917230] [fglrx] Gart cacheable size:247 M.
[ 13.917237] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 13.917240] [fglrx] Reserved FB block: Unshared offset:fe07000, size:1f9000
[ 13.917244] [fglrx] Reserved FB block: Unshared offset:1fffc000, size:4000
[ 16.898330] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[ 24.704114] usb 5-1: USB disconnect, address 2
[ 26.624115] usb 5-1: new low speed USB device using uhci_hcd and address 3
[ 26.801367] usb 5-1: configuration #1 chosen from 1 choice
[ 26.835564] input: USB Optical Mouse USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input10
[ 26.835687] a4tech 0003:09DA:0006.0002: input,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse USB Optical Mouse] on usb-0000:00:1d.0-1/input0
[ 43.265030] wlan0: direct probe to AP 00:4f:62:1d:4b:c7 (try 1)
[ 43.265051] wlan0: deauthenticating from 00:4f:62:1d:4b:c7 by local choice (reason=3)
[ 43.265229] wlan0: direct probe to AP 00:4f:62:1d:4b:c7 (try 1)
[ 43.270984] wlan0: direct probe responded
[ 43.270993] wlan0: authenticate with AP 00:4f:62:1d:4b:c7 (try 1)
[ 43.272866] wlan0: authenticated
[ 43.272898] wlan0: associate with AP 00:4f:62:1d:4b:c7 (try 1)
[ 43.275365] wlan0: RX AssocResp from 00:4f:62:1d:4b:c7 (capab=0x411 status=0 aid=3)
[ 43.275369] wlan0: associated
[ 43.277024] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 54.112066] wlan0: no IPv6 routers present
[ 162.421147] CE: hpet increasing min_delta_ns to 15000 nsec
[ 167.031183] CE: hpet increasing min_delta_ns to 22500 nsec
[ 190.391053] CE: hpet increasing min_delta_ns to 33750 nsec
orestis@orestis-laptop:~$
X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-25-server i686 Ubuntu
Current Operating System: Linux orestis-laptop 2.6.32-22-generic #36-Ubuntu SMP Thu Jun 3 22:02:19 UTC 2010 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic root=UUID=31fc5390-9b33-499b-9731-4eb989127778 ro quiet splash
Build Date: 23 April 2010 05:11:50PM
xorg-server 2:1.7.6-2ubuntu7 (Bryce Harrington <[email protected]>)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Jun 5 12:57:47 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using config directory: "/usr/lib/X11/xorg.conf.d"
(==) No Layout section. Using the first Screen section.
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "<default monitor>"
(==) No device specified for screen "Default Screen".
Using the first device section listed.
(**) | |-->Device "Default Device"
(==) No monitor specified for screen "Default Screen".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x81f0e80
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7
(--) PCI:*(0:1:0:0) 1002:9581:1179:ff00 ATI Technologies Inc M76 [Radeon Mobility HD 2600 Series] rev 0, Mem @ 0xd0000000/268435456, 0xfc000000/65536, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/extra-modules/modules/extensions/libglx.so
(II) Module glx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.5.0, module version = 1.0.0
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/extra-modules/modules/drivers/fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 1.7.1, module version = 8.72.11
Module class: X.Org Video Driver
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/extra-modules/modules/linux/libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 1.7.1, module version = 8.72.11
(II) ATI Proprietary Linux Driver Version Identifier:8.72.11
(II) ATI Proprietary Linux Driver Release Identifier: 8.723.1
(II) ATI Proprietary Linux Driver Build Date: Apr 8 2010 21:40:29
(II) Primary Device is: PCI 01@00:00:0
(WW) Falling back to old probe method for fglrx
(II) Loading PCS database from /etc/ati/amdpcsdb
(--) Assigning device section with no busID to primary device
(--) Chipset Supported AMD Graphics Processor (0x9581) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) AMD Video driver is signed
(II) fglrx(0): pEnt->device->identifier=0x9faa7d8
(II) fglrx(0): === [atiddxPreInit] === begin
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 0.1.0
ABI class: X.Org Video Driver, version 6.0
(II) fglrx(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 24/32
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/extra-modules/modules/linux/libfglrxdrm.so
ukiDynamicMajor: found major device number 250
ukiDynamicMajor: found major device number 250
ukiOpenByBusid: Searching for BusID PCI:1:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 11, (OK)
ukiOpenByBusid: ukiOpenMinor returns 11
ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
(--) fglrx(0): Chipset: "ATI Mobility Radeon HD 2600" (Chipset = 0x9581)
(--) fglrx(0): (PciSubVendor = 0x1179, PciSubDevice = 0xff00)
(==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xfc000000
(--) fglrx(0): I/O port at 0x00002000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) fglrx(0): AC Adapter is used
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.1.0
ABI class: X.Org Video Driver, version 6.0
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 10.60
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: M76
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
(--) fglrx(0): Video RAM: 524288 kByte, Type: DDR2
(II) fglrx(0): PCIE card detected
(--) fglrx(0): Using per-process page tables (PPPT) as GART.
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) fglrx(0): Using adapter: 1:0.0.
(II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x20000000)
(II) fglrx(0): Interrupt handler installed at IRQ 33.
(II) fglrx(0): RandR 1.2 support is enabled!
(II) fglrx(0): RandR 1.2 rotation support is enabled!
(==) fglrx(0): Center Mode is disabled
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) fglrx(0): Finished Initialize PPLIB!
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) fglrx(0): Connected Display0: LCD on internal LVDS [lvds]
(II) fglrx(0): Display0 EDID data ---------------------------
(II) fglrx(0): Manufacturer: SEC Model: 3645 Serial#: 0
(II) fglrx(0): Year: 2005 Week: 0
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): No DPMS capabilities specified
(II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
(II) fglrx(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 68.9 MHz Image Size: 331 x 207 mm
(II) fglrx(0): h_active: 1280 h_sync: 1296 h_sync_end 1344 h_blank_end 1408 h_border: 0
(II) fglrx(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
(II) fglrx(0): Unknown vendor-specific block f
(II) fglrx(0): SAMSUNG
(II) fglrx(0): LTN154X3-L05
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 00ffffffffffff004ca3453600000000
(II) fglrx(0): 000f0103802115780a87f594574f8c27
(II) fglrx(0): 27505400000001010101010101010101
(II) fglrx(0): 010101010101ee1a0080502010301030
(II) fglrx(0): 13004bcf100000190000000f00000000
(II) fglrx(0): 00000000002387026400000000fe0053
(II) fglrx(0): 414d53554e470a2020202020000000fe
(II) fglrx(0): 004c544e31353458332d4c30350a0061
(II) fglrx(0): End of Display0 EDID data --------------------
(II) fglrx(0): Output LVDS has no monitor section
(II) fglrx(0): Output DFP1 has no monitor section
(II) fglrx(0): Output CRT1 has no monitor section
(II) fglrx(0): Output TV has no monitor section
(II) fglrx(0): Output LVDS connected
(II) fglrx(0): Output DFP1 disconnected
(II) fglrx(0): Output CRT1 disconnected
(II) fglrx(0): Output TV disconnected
(II) fglrx(0): Using exact sizes for initial modes
(II) fglrx(0): Output LVDS using initial mode 1280x800
(II) fglrx(0): DPI set to (96, 96)
(II) fglrx(0): Adapter ATI Mobility Radeon HD 2600 has 2 configurable heads and 1 displays connected.
(==) fglrx(0): QBS disabled
(==) fglrx(0): PseudoColor visuals disabled
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) fglrx(0): NoAccel = NO
(==) fglrx(0): NoDRI = NO
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(--) Depth 24 pixmap format is 32 bpp
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing swlDriScreenInit
(II) fglrx(0): swlDriScreenInit for fglrx driver
ukiDynamicMajor: found major device number 250
ukiDynamicMajor: found major device number 250
ukiDynamicMajor: found major device number 250
ukiOpenByBusid: Searching for BusID PCI:1:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 17, (OK)
ukiOpenByBusid: ukiOpenMinor returns 17
ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
(II) fglrx(0): [uki] DRM interface version 1.0
(II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
(II) fglrx(0): [uki] mapped SAREA 0x2000 to 0xb787f000
(II) fglrx(0): [uki] framebuffer handle = 0x3000
(II) fglrx(0): [uki] added 1 reserved context for kernel
(II) fglrx(0): swlDriScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.72.11
(II) fglrx(0): Date: Apr 8 2010
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.32-22-generic
(II) fglrx(0): Build-Kernel MODVERSIONS: yes
(II) fglrx(0): Build-Kernel __SMP__: yes
(II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
(II) fglrx(0): [uki] register handle = 0x00004000
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x01004000
(II) fglrx(0): FBMM initialized for area (0,0)-(1280,3280)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,1280) (front color buffer - assumption)
(II) fglrx(0): Largest offscreen area available: 1280 x 2000
(==) fglrx(0): Backing store disabled
(II) Loading extension FGLRXEXTENSION
(==) fglrx(0): DPMS enabled
(II) fglrx(0): Initialized in-driver Xinerama extension
(**) fglrx(0): Textured Video is enabled.
(II) LoadModule: "glesx"
(II) Loading /usr/lib/xorg/extra-modules/modules/glesx.so
(II) Module glesx: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.0.0
(II) Loading extension GLESX
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.2.1
ABI class: X.Org Video Driver, version 6.0
(II) fglrx(0): GLESX enableFlags = 94
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid Horizontal and Vertical Lines
Driver provided ScreenToScreenBitBlt replacement
Driver provided FillSolidRects replacement
(II) fglrx(0): GLESX is enabled
(II) LoadModule: "amdxmm"
(II) Loading /usr/lib/xorg/extra-modules/modules/amdxmm.so
(II) Module amdxmm: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.0.0
(II) Loading extension AMDXVOPL
(II) fglrx(0): UVD2 feature is available
(II) fglrx(0): Enable composite support successfully
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): [DRI] installation complete
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using HW cursor of display infrastructure!
(II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
(II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
(II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
(II) fglrx(0): Cannot get TV Format. Set all TV geometry value to zero!
(II) fglrx(0): Cannot set TV horizontal size.
(II) fglrx(0): Cannot get TV Format for trying to adjust horizontal position after horizontal size changed.
(II) fglrx(0): Cannot set TV horizontal position.
(II) fglrx(0): Cannot set TV vertical position.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
ukiDynamicMajor: found major device number 250
ukiDynamicMajor: found major device number 250
ukiOpenByBusid: Searching for BusID PCI:1:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 18, (OK)
ukiOpenByBusid: ukiOpenMinor returns 18
ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
(II) AIGLX: Loaded and initialized /usr/lib/dri/fglrx_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) fglrx(0): Enable the clock gating!
(II) fglrx(0): Setting screen physical size to 338 x 211
(II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
(II) config/udev: Adding input device Power Button (/dev/input/event2)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event2"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us,gr"
(**) Option "xkb_variant" ","
(**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
(II) XKB: reuse xkmfile /var/lib/xkb/server-0784873EABBE2F3F8DCDEC70A37F488F93ECB155.xkm
(II) config/udev: Adding input device Video Bus (/dev/input/event6)
(**) Video Bus: Applying InputClass "evdev keyboard catchall"
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event6"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us,gr"
(**) Option "xkb_variant" ","
(**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
(II) config/udev: Adding input device Power Button (/dev/input/event1)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event1"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us,gr"
(**) Option "xkb_variant" ","
(**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
(II) config/udev: Adding input device Lid Switch (/dev/input/event0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Chicony USB 2.0 Camera (/dev/input/event7)
(**) Chicony USB 2.0 Camera: Applying InputClass "evdev keyboard catchall"
(**) Chicony USB 2.0 Camera: always reports core events
(**) Chicony USB 2.0 Camera: Device: "/dev/input/event7"
(II) Chicony USB 2.0 Camera: Found keys
(II) Chicony USB 2.0 Camera: Configuring as keyboard
(II) XINPUT: Adding extended input device "Chicony USB 2.0 Camera" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us,gr"
(**) Option "xkb_variant" ","
(**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
(II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device USB Optical Mouse USB Optical Mouse (/dev/input/event5)
(**) USB Optical Mouse USB Optical Mouse: Applying InputClass "evdev pointer catchall"
(**) USB Optical Mouse USB Optical Mouse: always reports core events
(**) USB Optical Mouse USB Optical Mouse: Device: "/dev/input/event5"
(II) USB Optical Mouse USB Optical Mouse: Found 10 mouse buttons
(II) USB Optical Mouse USB Optical Mouse: Found scroll wheel(s)
(II) USB Optical Mouse USB Optical Mouse: Found relative axes
(II) USB Optical Mouse USB Optical Mouse: Found x and y relative axes
(II) USB Optical Mouse USB Optical Mouse: Configuring as mouse
(**) USB Optical Mouse USB Optical Mouse: YAxisMapping: buttons 4 and 5
(**) USB Optical Mouse USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "USB Optical Mouse USB Optical Mouse" (type: MOUSE)
(II) USB Optical Mouse USB Optical Mouse: initialized for relative axes.
(II) config/udev: Adding input device USB Optical Mouse USB Optical Mouse (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
(**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event4"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us,gr"
(**) Option "xkb_variant" ","
(**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
(II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event9)
(**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
(**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(II) Synaptics touchpad driver version 1.2.2
(**) Option "Device" "/dev/input/event9"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
(**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
(**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse2)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/event3)
(**) Macintosh mouse button emulation: Applying InputClass "evdev pointer catchall"
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event3"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
(WW) fglrx(0): Cannot get updated TV attributes.
(WW) fglrx(0): Cannot get updated TV attributes.
(WW) fglrx(0): Cannot get updated TV attributes.
(II) config/udev: removing device USB Optical Mouse USB Optical Mouse
(II) USB Optical Mouse USB Optical Mouse: Close
(II) UnloadModule: "evdev"
(II) config/udev: Adding input device USB Optical Mouse USB Optical Mouse (/dev/input/event5)
(**) USB Optical Mouse USB Optical Mouse: Applying InputClass "evdev pointer catchall"
(**) USB Optical Mouse USB Optical Mouse: always reports core events
(**) USB Optical Mouse USB Optical Mouse: Device: "/dev/input/event5"
(II) USB Optical Mouse USB Optical Mouse: Found 10 mouse buttons
(II) USB Optical Mouse USB Optical Mouse: Found scroll wheel(s)
(II) USB Optical Mouse USB Optical Mouse: Found relative axes
(II) USB Optical Mouse USB Optical Mouse: Found x and y relative axes
(II) USB Optical Mouse USB Optical Mouse: Configuring as mouse
(**) USB Optical Mouse USB Optical Mouse: YAxisMapping: buttons 4 and 5
(**) USB Optical Mouse USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "USB Optical Mouse USB Optical Mouse" (type: MOUSE)
(II) USB Optical Mouse USB Optical Mouse: initialized for relative axes.
(II) config/udev: Adding input device USB Optical Mouse USB Optical Mouse (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(WW) fglrx(0): Cannot get updated TV attributes.
(WW) fglrx(0): Cannot get updated TV attributes.
(WW) fglrx(0): Cannot get updated TV attributes.
(WW) fglrx(0): Cannot get updated TV attributes.
Αυτά...
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 0c)
00:01.0 PCI bridge [0604]: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port [8086:2a01] (rev 0c)
00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 03)
00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 03)
00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 03)
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 03)
00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 03)
00:1c.2 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 [8086:2843] (rev 03)
00:1c.3 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 [8086:2845] (rev 03)
00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 [8086:2847] (rev 03)
00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 03)
00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 03)
00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 03)
00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 03)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f3)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller [8086:2815] (rev 03)
00:1f.1 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 03)
00:1f.2 SATA controller [0106]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller [8086:2829] (rev 03)
00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 03)
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc M76 [Radeon Mobility HD 2600 Series] [1002:9581]
01:00.1 Audio device [0403]: ATI Technologies Inc RV630/M76 audio device [Radeon HD 2600 Series] [1002:aa08]
04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 01)
05:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] (rev 02)
0c:04.0 CardBus bridge [0607]: Texas Instruments PCIxx12 Cardbus Controller [104c:8039]
0c:04.1 FireWire (IEEE 1394) [0c00]: Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller [104c:803a]
0c:04.2 Mass storage controller [0180]: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) [104c:803b]
0c:04.3 SD Host controller [0805]: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller [104c:803c]
[ 0.334957] pci_bus 0000:02: resource 0 io: [0x3000-0x3fff]
[ 0.334960] pci_bus 0000:02: resource 1 mem: [0xf0000000-0xf3ffffff]
[ 0.334963] pci_bus 0000:02: resource 2 pref mem [0xce000000-0xcfffffff]
[ 0.334967] pci_bus 0000:04: resource 0 io: [0x4000-0x4fff]
[ 0.334970] pci_bus 0000:04: resource 1 mem: [0xf4000000-0xf7ffffff]
[ 0.334973] pci_bus 0000:04: resource 2 pref mem [0xcc000000-0xcdffffff]
[ 0.334976] pci_bus 0000:05: resource 0 io: [0x5000-0x5fff]
[ 0.334979] pci_bus 0000:05: resource 1 mem: [0xf8000000-0xfbffffff]
[ 0.334982] pci_bus 0000:05: resource 2 pref mem [0xca000000-0xcbffffff]
[ 0.334985] pci_bus 0000:06: resource 0 io: [0x6000-0x6fff]
[ 0.334988] pci_bus 0000:06: resource 1 mem: [0xc4000000-0xc7ffffff]
[ 0.334992] pci_bus 0000:06: resource 2 pref mem [0xc8000000-0xc9ffffff]
[ 0.334995] pci_bus 0000:09: resource 0 io: [0x7000-0x7fff]
[ 0.334998] pci_bus 0000:09: resource 1 mem: [0x84000000-0x841fffff]
[ 0.335001] pci_bus 0000:09: resource 2 pref mem [0x84200000-0x843fffff]
[ 0.335004] pci_bus 0000:0c: resource 0 io: [0x8000-0x8fff]
[ 0.335007] pci_bus 0000:0c: resource 1 mem: [0xfc100000-0xfc1fffff]
[ 0.335010] pci_bus 0000:0c: resource 2 pref mem [0x80000000-0x83ffffff]
[ 0.335013] pci_bus 0000:0c: resource 3 io: [0x00-0xffff]
[ 0.335016] pci_bus 0000:0c: resource 4 mem: [0x000000-0xffffffff]
[ 0.335019] pci_bus 0000:0d: resource 0 io: [0x8000-0x80ff]
[ 0.335023] pci_bus 0000:0d: resource 1 io: [0x8400-0x84ff]
[ 0.335026] pci_bus 0000:0d: resource 2 pref mem [0x80000000-0x83ffffff]
[ 0.335029] pci_bus 0000:0d: resource 3 mem: [0x88000000-0x8bffffff]
[ 0.335076] NET: Registered protocol family 2
[ 0.335202] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.335629] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.336207] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.336454] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.336457] TCP reno registered
[ 0.336567] NET: Registered protocol family 1
[ 0.336747] pci 0000:01:00.0: Boot video device
[ 0.336791] Simple Boot Flag at 0x36 set to 0x1
[ 0.337006] cpufreq-nforce2: No nForce2 chipset.
[ 0.337040] Scanning for low memory corruption every 60 seconds
[ 0.337177] audit: initializing netlink socket (disabled)
[ 0.337189] type=2000 audit(1275731854.335:1): initialized
[ 0.349259] highmem bounce pool size: 64 pages
[ 0.349266] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.351177] VFS: Disk quotas dquot_6.5.2
[ 0.351257] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.351962] fuse init (API version 7.13)
[ 0.352069] msgmni has been set to 1690
[ 0.352322] alg: No test for stdrng (krng)
[ 0.352388] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.352392] io scheduler noop registered
[ 0.352394] io scheduler anticipatory registered
[ 0.352397] io scheduler deadline registered
[ 0.352447] io scheduler cfq registered (default)
[ 0.352639] alloc irq_desc for 24 on node -1
[ 0.352642] alloc kstat_irqs on node -1
[ 0.352652] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.352661] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.352821] alloc irq_desc for 25 on node -1
[ 0.352823] alloc kstat_irqs on node -1
[ 0.352834] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.352846] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.353032] alloc irq_desc for 26 on node -1
[ 0.353034] alloc kstat_irqs on node -1
[ 0.353045] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
[ 0.353058] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.353242] alloc irq_desc for 27 on node -1
[ 0.353244] alloc kstat_irqs on node -1
[ 0.353254] pcieport 0000:00:1c.2: irq 27 for MSI/MSI-X
[ 0.353267] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.353448] alloc irq_desc for 28 on node -1
[ 0.353450] alloc kstat_irqs on node -1
[ 0.353461] pcieport 0000:00:1c.3: irq 28 for MSI/MSI-X
[ 0.353474] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.353658] alloc irq_desc for 29 on node -1
[ 0.353661] alloc kstat_irqs on node -1
[ 0.353671] pcieport 0000:00:1c.4: irq 29 for MSI/MSI-X
[ 0.353684] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.353812] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.354025] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.354179] ACPI: AC Adapter [ACAD] (on-line)
[ 0.354254] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.354303] ACPI: Lid Switch [LID0]
[ 0.354356] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.354359] ACPI: Power Button [PWRB]
[ 0.354435] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.354438] ACPI: Power Button [PWRF]
[ 0.355275] ACPI: SSDT 7fed88af 001F6 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.355880] ACPI: SSDT 7fed839f 0048B (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.358542] Monitor-Mwait will be used to enter C-1 state
[ 0.358578] Monitor-Mwait will be used to enter C-2 state
[ 0.358607] Monitor-Mwait will be used to enter C-3 state
[ 0.358614] Marking TSC unstable due to TSC halts in idle
[ 0.358678] processor LNXCPU:00: registered as cooling_device0
[ 0.359103] ACPI: SSDT 7fed8aa5 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 0.359553] ACPI: SSDT 7fed882a 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.360221] Switching to clocksource hpet
[ 0.363523] processor LNXCPU:01: registered as cooling_device1
[ 0.386272] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.387957] brd: module loaded
[ 0.388565] loop: module loaded
[ 0.388669] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 0.388789] ata_piix 0000:00:1f.1: version 2.13
[ 0.388805] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.388853] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.388948] scsi0 : ata_piix
[ 0.389036] scsi1 : ata_piix
[ 0.389759] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14
[ 0.389762] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15
[ 0.390183] Fixed MDIO Bus: probed
[ 0.390226] PPP generic driver version 2.4.2
[ 0.390272] tun: Universal TUN/TAP device driver, 1.6
[ 0.390274] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[ 0.390373] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.390396] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.390414] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.390418] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.390469] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.390506] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.394397] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.394415] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfc404800
[ 0.398373] isapnp: Scanning for PnP cards...
[ 0.417301] Freeing initrd memory: 7776k freed
[ 0.423835] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.424026] usb usb1: configuration #1 chosen from 1 choice
[ 0.424064] hub 1-0:1.0: USB hub found
[ 0.424076] hub 1-0:1.0: 4 ports detected
[ 0.424159] alloc irq_desc for 23 on node -1
[ 0.424162] alloc kstat_irqs on node -1
[ 0.424170] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.424199] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.424203] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.424248] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.424284] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.428181] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.428204] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc404c00
[ 0.445018] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.445106] usb usb2: configuration #1 chosen from 1 choice
[ 0.445138] hub 2-0:1.0: USB hub found
[ 0.445147] hub 2-0:1.0: 6 ports detected
[ 0.445228] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.445253] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.445302] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.445311] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.445315] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.445354] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.445394] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
[ 0.445503] usb usb3: configuration #1 chosen from 1 choice
[ 0.445537] hub 3-0:1.0: USB hub found
[ 0.445546] hub 3-0:1.0: 2 ports detected
[ 0.445603] alloc irq_desc for 21 on node -1
[ 0.445606] alloc kstat_irqs on node -1
[ 0.445612] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.445619] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.445624] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.445661] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.445701] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
[ 0.445810] usb usb4: configuration #1 chosen from 1 choice
[ 0.445841] hub 4-0:1.0: USB hub found
[ 0.445849] hub 4-0:1.0: 2 ports detected
[ 0.445908] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.445915] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.445920] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.445957] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 0.445988] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
[ 0.446100] usb usb5: configuration #1 chosen from 1 choice
[ 0.446131] hub 5-0:1.0: USB hub found
[ 0.446140] hub 5-0:1.0: 2 ports detected
[ 0.446194] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.446202] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.446206] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.446245] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 0.446285] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
[ 0.446400] usb usb6: configuration #1 chosen from 1 choice
[ 0.446431] hub 6-0:1.0: USB hub found
[ 0.446439] hub 6-0:1.0: 2 ports detected
[ 0.446494] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.446502] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.446506] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.446548] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 0.446580] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
[ 0.446689] usb usb7: configuration #1 chosen from 1 choice
[ 0.446720] hub 7-0:1.0: USB hub found
[ 0.446729] hub 7-0:1.0: 2 ports detected
[ 0.446855] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.474202] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.474209] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.474302] mice: PS/2 mouse device common for all mice
[ 0.474446] rtc_cmos 00:07: RTC can wake from S4
[ 0.474491] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 0.474526] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.474643] device-mapper: uevent: version 1.0.3
[ 0.474751] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: [email protected]
[ 0.474828] device-mapper: multipath: version 1.1.0 loaded
[ 0.474831] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.474962] EISA: Probing bus 0 at eisa.0
[ 0.474969] Cannot allocate resource for EISA slot 1
[ 0.474972] Cannot allocate resource for EISA slot 2
[ 0.474975] Cannot allocate resource for EISA slot 3
[ 0.474977] Cannot allocate resource for EISA slot 4
[ 0.474980] Cannot allocate resource for EISA slot 5
[ 0.474982] Cannot allocate resource for EISA slot 6
[ 0.474985] Cannot allocate resource for EISA slot 7
[ 0.474987] Cannot allocate resource for EISA slot 8
[ 0.474990] EISA: Detected 0 cards.
[ 0.475156] cpuidle: using governor ladder
[ 0.475298] cpuidle: using governor menu
[ 0.475857] TCP cubic registered
[ 0.476042] NET: Registered protocol family 10
[ 0.476618] lo: Disabled Privacy Extensions
[ 0.477051] NET: Registered protocol family 17
[ 0.477655] Using IPI No-Shortcut mode
[ 0.477744] PM: Resume from disk failed.
[ 0.477758] registered taskstats version 1
[ 0.478559] Magic number: 14:768:979
[ 0.478652] rtc_cmos 00:07: setting system clock to 2010-06-05 09:57:34 UTC (1275731854)
[ 0.478656] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.478659] EDD information not available.
[ 0.502503] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 0.541187] ACPI: Battery Slot [BAT1] (battery present)
[ 0.585414] ata1.00: ATAPI: MATSHITADVD-RAM UJ-850S, 1.40, max UDMA/33
[ 0.609333] ata1.00: configured for UDMA/33
[ 0.752848] isapnp: No Plug & Play device found
[ 0.755079] scsi 0:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-850S 1.40 PQ: 0 ANSI: 5
[ 0.760304] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 0.760308] Uniform CD-ROM driver Revision: 3.20
[ 0.760417] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 0.760477] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 0.760542] Freeing unused kernel memory: 656k freed
[ 0.761047] Write protecting the kernel text: 4676k
[ 0.761102] Write protecting the kernel read-only data: 1840k
[ 0.781640] udev: starting version 151
[ 0.821316] usb 1-3: new high speed USB device using ehci_hcd and address 2
[ 0.869151] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.869180] r8169 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.869241] r8169 0000:04:00.0: setting latency timer to 64
[ 0.869324] alloc irq_desc for 30 on node -1
[ 0.869327] alloc kstat_irqs on node -1
[ 0.869346] r8169 0000:04:00.0: irq 30 for MSI/MSI-X
[ 0.870195] eth0: RTL8101e at 0xf80a0000, 00:1e:ec:02:8e:44, XID 94200000 IRQ 30
[ 0.876996] ahci 0000:00:1f.2: version 3.0
[ 0.877055] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.877107] alloc irq_desc for 31 on node -1
[ 0.877110] alloc kstat_irqs on node -1
[ 0.877123] ahci 0000:00:1f.2: irq 31 for MSI/MSI-X
[ 0.877196] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[ 0.877200] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc
[ 0.877207] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.879191] scsi2 : ahci
[ 0.879386] scsi3 : ahci
[ 0.879535] scsi4 : ahci
[ 0.879712] ata3: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404100 irq 31
[ 0.879717] ata4: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404180 irq 31
[ 0.879721] ata5: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404200 irq 31
[ 0.971276] usb 1-3: configuration #1 chosen from 1 choice
[ 1.140071] usb 2-2: new high speed USB device using ehci_hcd and address 3
[ 1.196072] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.196103] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.274658] usb 2-2: configuration #1 chosen from 1 choice
[ 1.283354] Initializing USB Mass Storage driver...
[ 1.283511] scsi5 : SCSI emulation for USB Mass Storage devices
[ 1.283614] usbcore: registered new interface driver usb-storage
[ 1.283617] USB Mass Storage support registered.
[ 1.283624] usb-storage: device found at 3
[ 1.283626] usb-storage: waiting for device to settle before scanning
[ 1.512056] usb 5-1: new low speed USB device using uhci_hcd and address 2
[ 1.532085] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.532842] ACPI Warning for \_SB_.PCI0.SATA.PRT0._GTF: Return type mismatch - found Integer, expected Buffer (20090903/nspredef-1006)
[ 1.532852] ata3.00: _GTF unexpected object type 0x1
[ 1.690203] usb 5-1: configuration #1 chosen from 1 choice
[ 1.909165] ata3.00: ATA-8: TOSHIBA MK1646GSX, LB113M, max UDMA/100
[ 1.909174] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.910244] ata3.00: _GTF unexpected object type 0x1
[ 1.910492] ata3.00: configured for UDMA/100
[ 1.928242] scsi 2:0:0:0: Direct-Access ATA TOSHIBA MK1646GS LB11 PQ: 0 ANSI: 5
[ 1.928457] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 1.928496] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 1.928575] sd 2:0:0:0: [sda] Write Protect is off
[ 1.928579] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.928608] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.928768] sda: sda1 sda2 < sda5 >
[ 2.006420] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.011153] usbcore: registered new interface driver hiddev
[ 2.011220] usbcore: registered new interface driver usbhid
[ 2.011223] usbhid: v2.6:USB HID core driver
[ 2.015069] ohci1394 0000:0c:04.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.028371] input: USB Optical Mouse USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input5
[ 2.028482] a4tech 0003:09DA:0006.0001: input,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse USB Optical Mouse] on usb-0000:00:1d.0-1/input0
[ 2.069104] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[fc102000-fc1027ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 2.415635] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 3.340236] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f81ad42f8e8]
[ 6.280258] usb-storage: device scan complete
[ 6.281314] scsi 5:0:0:0: Direct-Access USB 2.0 USB Flash Drive 0.00 PQ: 0 ANSI: 2
[ 6.281823] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 6.282928] sd 5:0:0:0: [sdb] 31588351 512-byte logical blocks: (16.1 GB/15.0 GiB)
[ 6.283778] sd 5:0:0:0: [sdb] Write Protect is off
[ 6.283781] sd 5:0:0:0: [sdb] Mode Sense: 00 00 00 00
[ 6.283784] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 6.287402] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 6.287406] sdb: sdb1
[ 6.348284] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 6.348288] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[ 11.373957] udev: starting version 151
[ 11.489122] Adding 6034424k swap on /dev/sda5. Priority:-1 extents:1 across:6034424k
[ 11.493575] acpi device:03: registered as cooling_device2
[ 11.493822] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input6
[ 11.493880] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 11.539117] lp: driver loaded but no devices found
[ 11.721111] cfg80211: Calling CRDA to update world regulatory domain
[ 11.725574] vga16fb: initializing
[ 11.725578] vga16fb: mapped to 0xc00a0000
[ 11.725644] fb0: VGA16 VGA frame buffer device
[ 11.737021] Linux agpgart interface v0.103
[ 11.759290] sdhci: Secure Digital Host Controller Interface driver
[ 11.759294] sdhci: Copyright(c) Pierre Ossman
[ 11.765166] sdhci-pci 0000:0c:04.3: SDHCI controller found [104c:803c] (rev 0)
[ 11.765189] sdhci-pci 0000:0c:04.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 11.765262] Registered led device: mmc0::
[ 11.765302] mmc0: SDHCI controller on PCI [0000:0c:04.3] using DMA
[ 11.765401] Linux video capture interface: v2.00
[ 11.769351] uvcvideo: Found UVC 1.00 device Chicony USB 2.0 Camera (04f2:b008)
[ 11.775744] tifm_7xx1 0000:0c:04.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 11.777238] input: Chicony USB 2.0 Camera as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0/input/input7
[ 11.777348] usbcore: registered new interface driver uvcvideo
[ 11.777519] USB Video Class driver (v0.1.0)
[ 11.809049] tifm_core: MMC/SD card detected in socket 0:1
[ 11.813481] cfg80211: World regulatory domain updated:
[ 11.813485] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 11.813489] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.813492] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 11.813496] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 11.813499] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.813502] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.824998] yenta_cardbus 0000:0c:04.0: CardBus bridge found [1179:ff00]
[ 11.825024] yenta_cardbus 0000:0c:04.0: Enabling burst memory read transactions
[ 11.825031] yenta_cardbus 0000:0c:04.0: Using CSCINT to route CSC interrupts to PCI
[ 11.825034] yenta_cardbus 0000:0c:04.0: Routing CardBus interrupts to PCI
[ 11.825042] yenta_cardbus 0000:0c:04.0: TI: mfunc 0x10a01b22, devctl 0x64
[ 11.834017] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 11.834023] Disabling lock debugging due to kernel taint
[ 11.849447] type=1505 audit(1275731865.869:2): operation="profile_load" pid=686 name="/sbin/dhclient3"
[ 11.850286] type=1505 audit(1275731865.869:3): operation="profile_load" pid=686 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 11.850731] type=1505 audit(1275731865.869:4): operation="profile_load" pid=686 name="/usr/lib/connman/scripts/dhclient-script"
[ 11.981175] [fglrx] Maximum main memory to use for locked dma buffers: 1885 MBytes.
[ 11.987210] [fglrx] vendor: 1002 device: 9581 count: 1
[ 12.009319] [fglrx] ioport: bar 1, base 0x2000, size: 0x100
[ 12.009348] pci 0000:01:00.0: power state changed by ACPI to D0
[ 12.009360] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 12.009368] pci 0000:01:00.0: setting latency timer to 64
[ 12.009992] [fglrx] Kernel PAT support is enabled
[ 12.010020] [fglrx] module loaded - fglrx 8.72.11 [Apr 8 2010] with 1 minors
[ 12.051029] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
[ 12.051032] iwl3945: Copyright(c) 2003-2009 Intel Corporation
[ 12.051157] iwl3945 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 12.051173] iwl3945 0000:05:00.0: setting latency timer to 64
[ 12.068312] yenta_cardbus 0000:0c:04.0: ISA IRQ mask 0x0cf8, PCI irq 16
[ 12.068316] yenta_cardbus 0000:0c:04.0: Socket status: 30000006
[ 12.068321] pci_bus 0000:0c: Raising subordinate bus# of parent bus (#0c) from #0d to #10
[ 12.068331] yenta_cardbus 0000:0c:04.0: pcmcia: parent PCI bridge I/O window: 0x8000 - 0x8fff
[ 12.068334] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x8000-0x8fff: clean.
[ 12.068628] yenta_cardbus 0000:0c:04.0: pcmcia: parent PCI bridge Memory window: 0xfc100000 - 0xfc1fffff
[ 12.068631] yenta_cardbus 0000:0c:04.0: pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x83ffffff
[ 12.161772] Console: switching to colour frame buffer device 80x30
[ 12.208095] iwl3945 0000:05:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 12.208100] iwl3945 0000:05:00.0: Detected Intel Wireless WiFi Link 3945ABG
[ 12.208223] alloc irq_desc for 32 on node -1
[ 12.208226] alloc kstat_irqs on node -1
[ 12.208261] iwl3945 0000:05:00.0: irq 32 for MSI/MSI-X
[ 12.216293] alloc irq_desc for 22 on node -1
[ 12.216297] alloc kstat_irqs on node -1
[ 12.216306] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 12.216350] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 12.228486] phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 12.330309] hda_codec: ALC268: BIOS auto-probing.
[ 12.330787] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[ 12.342823] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 12.342870] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 12.394395] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[ 12.396619] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 12.397544] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 12.398306] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 12.399275] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 12.432751] type=1505 audit(1275731866.453:5): operation="profile_load" pid=866 name="/usr/share/gdm/guest-session/Xsession"
[ 12.438497] type=1505 audit(1275731866.457:6): operation="profile_replace" pid=868 name="/sbin/dhclient3"
[ 12.439336] type=1505 audit(1275731866.457:7): operation="profile_replace" pid=868 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 12.439789] type=1505 audit(1275731866.457:8): operation="profile_replace" pid=868 name="/usr/lib/connman/scripts/dhclient-script"
[ 12.449940] type=1505 audit(1275731866.469:9): operation="profile_load" pid=871 name="/usr/bin/evince"
[ 12.483165] type=1505 audit(1275731866.501:10): operation="profile_load" pid=871 name="/usr/bin/evince-previewer"
[ 12.490001] type=1505 audit(1275731866.509:11): operation="profile_load" pid=871 name="/usr/bin/evince-thumbnailer"
[ 12.516973] r8169: eth0: link down
[ 12.517250] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.531372] iwl3945 0000:05:00.0: firmware: requesting iwlwifi-3945-2.ucode
[ 12.558775] iwl3945 0000:05:00.0: loaded firmware version 15.32.2.9
[ 12.632783] Registered led device: iwl-phy0::radio
[ 12.632808] Registered led device: iwl-phy0::assoc
[ 12.632828] Registered led device: iwl-phy0::RX
[ 12.632848] Registered led device: iwl-phy0::TX
[ 12.646085] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 12.855684] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
[ 12.909778] ppdev: user-space parallel port driver
[ 12.932159] Synaptics Touchpad, model: 1, fw: 6.5, id: 0x82e0b1, caps: 0xb04711/0xe0440d
[ 12.932167] synaptics: Toshiba Satellite A200 detected, limiting rate to 40pps.
[ 13.031656] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
[ 13.369685] alloc irq_desc for 33 on node -1
[ 13.369689] alloc kstat_irqs on node -1
[ 13.369705] fglrx_pci 0000:01:00.0: irq 33 for MSI/MSI-X
[ 13.370590] [fglrx] Firegl kernel thread PID: 1181
[ 13.370804] [fglrx] IRQ 33 Enabled
[ 13.917226] [fglrx] Gart USWC size:627 M.
[ 13.917230] [fglrx] Gart cacheable size:247 M.
[ 13.917237] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 13.917240] [fglrx] Reserved FB block: Unshared offset:fe07000, size:1f9000
[ 13.917244] [fglrx] Reserved FB block: Unshared offset:1fffc000, size:4000
[ 16.898330] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[ 24.704114] usb 5-1: USB disconnect, address 2
[ 26.624115] usb 5-1: new low speed USB device using uhci_hcd and address 3
[ 26.801367] usb 5-1: configuration #1 chosen from 1 choice
[ 26.835564] input: USB Optical Mouse USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input10
[ 26.835687] a4tech 0003:09DA:0006.0002: input,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse USB Optical Mouse] on usb-0000:00:1d.0-1/input0
[ 43.265030] wlan0: direct probe to AP 00:4f:62:1d:4b:c7 (try 1)
[ 43.265051] wlan0: deauthenticating from 00:4f:62:1d:4b:c7 by local choice (reason=3)
[ 43.265229] wlan0: direct probe to AP 00:4f:62:1d:4b:c7 (try 1)
[ 43.270984] wlan0: direct probe responded
[ 43.270993] wlan0: authenticate with AP 00:4f:62:1d:4b:c7 (try 1)
[ 43.272866] wlan0: authenticated
[ 43.272898] wlan0: associate with AP 00:4f:62:1d:4b:c7 (try 1)
[ 43.275365] wlan0: RX AssocResp from 00:4f:62:1d:4b:c7 (capab=0x411 status=0 aid=3)
[ 43.275369] wlan0: associated
[ 43.277024] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 54.112066] wlan0: no IPv6 routers present
[ 162.421147] CE: hpet increasing min_delta_ns to 15000 nsec
[ 167.031183] CE: hpet increasing min_delta_ns to 22500 nsec
[ 190.391053] CE: hpet increasing min_delta_ns to 33750 nsec
orestis@orestis-laptop:~$
X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-25-server i686 Ubuntu
Current Operating System: Linux orestis-laptop 2.6.32-22-generic #36-Ubuntu SMP Thu Jun 3 22:02:19 UTC 2010 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic root=UUID=31fc5390-9b33-499b-9731-4eb989127778 ro quiet splash
Build Date: 23 April 2010 05:11:50PM
xorg-server 2:1.7.6-2ubuntu7 (Bryce Harrington <[email protected]>)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Jun 5 12:57:47 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using config directory: "/usr/lib/X11/xorg.conf.d"
(==) No Layout section. Using the first Screen section.
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "<default monitor>"
(==) No device specified for screen "Default Screen".
Using the first device section listed.
(**) | |-->Device "Default Device"
(==) No monitor specified for screen "Default Screen".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x81f0e80
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7
(--) PCI:*(0:1:0:0) 1002:9581:1179:ff00 ATI Technologies Inc M76 [Radeon Mobility HD 2600 Series] rev 0, Mem @ 0xd0000000/268435456, 0xfc000000/65536, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/extra-modules/modules/extensions/libglx.so
(II) Module glx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.5.0, module version = 1.0.0
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/extra-modules/modules/drivers/fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 1.7.1, module version = 8.72.11
Module class: X.Org Video Driver
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/extra-modules/modules/linux/libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 1.7.1, module version = 8.72.11
(II) ATI Proprietary Linux Driver Version Identifier:8.72.11
(II) ATI Proprietary Linux Driver Release Identifier: 8.723.1
(II) ATI Proprietary Linux Driver Build Date: Apr 8 2010 21:40:29
(II) Primary Device is: PCI 01@00:00:0
(WW) Falling back to old probe method for fglrx
(II) Loading PCS database from /etc/ati/amdpcsdb
(--) Assigning device section with no busID to primary device
(--) Chipset Supported AMD Graphics Processor (0x9581) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) AMD Video driver is signed
(II) fglrx(0): pEnt->device->identifier=0x9faa7d8
(II) fglrx(0): === [atiddxPreInit] === begin
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 0.1.0
ABI class: X.Org Video Driver, version 6.0
(II) fglrx(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 24/32
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/extra-modules/modules/linux/libfglrxdrm.so
ukiDynamicMajor: found major device number 250
ukiDynamicMajor: found major device number 250
ukiOpenByBusid: Searching for BusID PCI:1:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 11, (OK)
ukiOpenByBusid: ukiOpenMinor returns 11
ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
(--) fglrx(0): Chipset: "ATI Mobility Radeon HD 2600" (Chipset = 0x9581)
(--) fglrx(0): (PciSubVendor = 0x1179, PciSubDevice = 0xff00)
(==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xfc000000
(--) fglrx(0): I/O port at 0x00002000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) fglrx(0): AC Adapter is used
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.1.0
ABI class: X.Org Video Driver, version 6.0
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 10.60
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: M76
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
(--) fglrx(0): Video RAM: 524288 kByte, Type: DDR2
(II) fglrx(0): PCIE card detected
(--) fglrx(0): Using per-process page tables (PPPT) as GART.
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) fglrx(0): Using adapter: 1:0.0.
(II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x20000000)
(II) fglrx(0): Interrupt handler installed at IRQ 33.
(II) fglrx(0): RandR 1.2 support is enabled!
(II) fglrx(0): RandR 1.2 rotation support is enabled!
(==) fglrx(0): Center Mode is disabled
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) fglrx(0): Finished Initialize PPLIB!
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) fglrx(0): Connected Display0: LCD on internal LVDS [lvds]
(II) fglrx(0): Display0 EDID data ---------------------------
(II) fglrx(0): Manufacturer: SEC Model: 3645 Serial#: 0
(II) fglrx(0): Year: 2005 Week: 0
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): No DPMS capabilities specified
(II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
(II) fglrx(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 68.9 MHz Image Size: 331 x 207 mm
(II) fglrx(0): h_active: 1280 h_sync: 1296 h_sync_end 1344 h_blank_end 1408 h_border: 0
(II) fglrx(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
(II) fglrx(0): Unknown vendor-specific block f
(II) fglrx(0): SAMSUNG
(II) fglrx(0): LTN154X3-L05
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 00ffffffffffff004ca3453600000000
(II) fglrx(0): 000f0103802115780a87f594574f8c27
(II) fglrx(0): 27505400000001010101010101010101
(II) fglrx(0): 010101010101ee1a0080502010301030
(II) fglrx(0): 13004bcf100000190000000f00000000
(II) fglrx(0): 00000000002387026400000000fe0053
(II) fglrx(0): 414d53554e470a2020202020000000fe
(II) fglrx(0): 004c544e31353458332d4c30350a0061
(II) fglrx(0): End of Display0 EDID data --------------------
(II) fglrx(0): Output LVDS has no monitor section
(II) fglrx(0): Output DFP1 has no monitor section
(II) fglrx(0): Output CRT1 has no monitor section
(II) fglrx(0): Output TV has no monitor section
(II) fglrx(0): Output LVDS connected
(II) fglrx(0): Output DFP1 disconnected
(II) fglrx(0): Output CRT1 disconnected
(II) fglrx(0): Output TV disconnected
(II) fglrx(0): Using exact sizes for initial modes
(II) fglrx(0): Output LVDS using initial mode 1280x800
(II) fglrx(0): DPI set to (96, 96)
(II) fglrx(0): Adapter ATI Mobility Radeon HD 2600 has 2 configurable heads and 1 displays connected.
(==) fglrx(0): QBS disabled
(==) fglrx(0): PseudoColor visuals disabled
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) fglrx(0): NoAccel = NO
(==) fglrx(0): NoDRI = NO
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(--) Depth 24 pixmap format is 32 bpp
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing swlDriScreenInit
(II) fglrx(0): swlDriScreenInit for fglrx driver
ukiDynamicMajor: found major device number 250
ukiDynamicMajor: found major device number 250
ukiDynamicMajor: found major device number 250
ukiOpenByBusid: Searching for BusID PCI:1:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 17, (OK)
ukiOpenByBusid: ukiOpenMinor returns 17
ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
(II) fglrx(0): [uki] DRM interface version 1.0
(II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
(II) fglrx(0): [uki] mapped SAREA 0x2000 to 0xb787f000
(II) fglrx(0): [uki] framebuffer handle = 0x3000
(II) fglrx(0): [uki] added 1 reserved context for kernel
(II) fglrx(0): swlDriScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.72.11
(II) fglrx(0): Date: Apr 8 2010
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.32-22-generic
(II) fglrx(0): Build-Kernel MODVERSIONS: yes
(II) fglrx(0): Build-Kernel __SMP__: yes
(II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
(II) fglrx(0): [uki] register handle = 0x00004000
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x01004000
(II) fglrx(0): FBMM initialized for area (0,0)-(1280,3280)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,1280) (front color buffer - assumption)
(II) fglrx(0): Largest offscreen area available: 1280 x 2000
(==) fglrx(0): Backing store disabled
(II) Loading extension FGLRXEXTENSION
(==) fglrx(0): DPMS enabled
(II) fglrx(0): Initialized in-driver Xinerama extension
(**) fglrx(0): Textured Video is enabled.
(II) LoadModule: "glesx"
(II) Loading /usr/lib/xorg/extra-modules/modules/glesx.so
(II) Module glesx: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.0.0
(II) Loading extension GLESX
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.2.1
ABI class: X.Org Video Driver, version 6.0
(II) fglrx(0): GLESX enableFlags = 94
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid Horizontal and Vertical Lines
Driver provided ScreenToScreenBitBlt replacement
Driver provided FillSolidRects replacement
(II) fglrx(0): GLESX is enabled
(II) LoadModule: "amdxmm"
(II) Loading /usr/lib/xorg/extra-modules/modules/amdxmm.so
(II) Module amdxmm: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.0.0
(II) Loading extension AMDXVOPL
(II) fglrx(0): UVD2 feature is available
(II) fglrx(0): Enable composite support successfully
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): [DRI] installation complete
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using HW cursor of display infrastructure!
(II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
(II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
(II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
(II) fglrx(0): Cannot get TV Format. Set all TV geometry value to zero!
(II) fglrx(0): Cannot set TV horizontal size.
(II) fglrx(0): Cannot get TV Format for trying to adjust horizontal position after horizontal size changed.
(II) fglrx(0): Cannot set TV horizontal position.
(II) fglrx(0): Cannot set TV vertical position.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
ukiDynamicMajor: found major device number 250
ukiDynamicMajor: found major device number 250
ukiOpenByBusid: Searching for BusID PCI:1:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 18, (OK)
ukiOpenByBusid: ukiOpenMinor returns 18
ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
(II) AIGLX: Loaded and initialized /usr/lib/dri/fglrx_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) fglrx(0): Enable the clock gating!
(II) fglrx(0): Setting screen physical size to 338 x 211
(II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
(II) config/udev: Adding input device Power Button (/dev/input/event2)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event2"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us,gr"
(**) Option "xkb_variant" ","
(**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
(II) XKB: reuse xkmfile /var/lib/xkb/server-0784873EABBE2F3F8DCDEC70A37F488F93ECB155.xkm
(II) config/udev: Adding input device Video Bus (/dev/input/event6)
(**) Video Bus: Applying InputClass "evdev keyboard catchall"
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event6"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us,gr"
(**) Option "xkb_variant" ","
(**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
(II) config/udev: Adding input device Power Button (/dev/input/event1)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event1"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us,gr"
(**) Option "xkb_variant" ","
(**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
(II) config/udev: Adding input device Lid Switch (/dev/input/event0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Chicony USB 2.0 Camera (/dev/input/event7)
(**) Chicony USB 2.0 Camera: Applying InputClass "evdev keyboard catchall"
(**) Chicony USB 2.0 Camera: always reports core events
(**) Chicony USB 2.0 Camera: Device: "/dev/input/event7"
(II) Chicony USB 2.0 Camera: Found keys
(II) Chicony USB 2.0 Camera: Configuring as keyboard
(II) XINPUT: Adding extended input device "Chicony USB 2.0 Camera" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us,gr"
(**) Option "xkb_variant" ","
(**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
(II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device USB Optical Mouse USB Optical Mouse (/dev/input/event5)
(**) USB Optical Mouse USB Optical Mouse: Applying InputClass "evdev pointer catchall"
(**) USB Optical Mouse USB Optical Mouse: always reports core events
(**) USB Optical Mouse USB Optical Mouse: Device: "/dev/input/event5"
(II) USB Optical Mouse USB Optical Mouse: Found 10 mouse buttons
(II) USB Optical Mouse USB Optical Mouse: Found scroll wheel(s)
(II) USB Optical Mouse USB Optical Mouse: Found relative axes
(II) USB Optical Mouse USB Optical Mouse: Found x and y relative axes
(II) USB Optical Mouse USB Optical Mouse: Configuring as mouse
(**) USB Optical Mouse USB Optical Mouse: YAxisMapping: buttons 4 and 5
(**) USB Optical Mouse USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "USB Optical Mouse USB Optical Mouse" (type: MOUSE)
(II) USB Optical Mouse USB Optical Mouse: initialized for relative axes.
(II) config/udev: Adding input device USB Optical Mouse USB Optical Mouse (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
(**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event4"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us,gr"
(**) Option "xkb_variant" ","
(**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
(II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event9)
(**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
(**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(II) Synaptics touchpad driver version 1.2.2
(**) Option "Device" "/dev/input/event9"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
(**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
(**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse2)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/event3)
(**) Macintosh mouse button emulation: Applying InputClass "evdev pointer catchall"
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event3"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
(WW) fglrx(0): Cannot get updated TV attributes.
(WW) fglrx(0): Cannot get updated TV attributes.
(WW) fglrx(0): Cannot get updated TV attributes.
(II) config/udev: removing device USB Optical Mouse USB Optical Mouse
(II) USB Optical Mouse USB Optical Mouse: Close
(II) UnloadModule: "evdev"
(II) config/udev: Adding input device USB Optical Mouse USB Optical Mouse (/dev/input/event5)
(**) USB Optical Mouse USB Optical Mouse: Applying InputClass "evdev pointer catchall"
(**) USB Optical Mouse USB Optical Mouse: always reports core events
(**) USB Optical Mouse USB Optical Mouse: Device: "/dev/input/event5"
(II) USB Optical Mouse USB Optical Mouse: Found 10 mouse buttons
(II) USB Optical Mouse USB Optical Mouse: Found scroll wheel(s)
(II) USB Optical Mouse USB Optical Mouse: Found relative axes
(II) USB Optical Mouse USB Optical Mouse: Found x and y relative axes
(II) USB Optical Mouse USB Optical Mouse: Configuring as mouse
(**) USB Optical Mouse USB Optical Mouse: YAxisMapping: buttons 4 and 5
(**) USB Optical Mouse USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "USB Optical Mouse USB Optical Mouse" (type: MOUSE)
(II) USB Optical Mouse USB Optical Mouse: initialized for relative axes.
(II) config/udev: Adding input device USB Optical Mouse USB Optical Mouse (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(WW) fglrx(0): Cannot get updated TV attributes.
(WW) fglrx(0): Cannot get updated TV attributes.
(WW) fglrx(0): Cannot get updated TV attributes.
(WW) fglrx(0): Cannot get updated TV attributes.
Αυτά...
1) Κανε εγκατασταση απο synaptic το πακετο bootchart - κανε μια επανεκκινηση,
και δωσε μας την εικονα που βρισκετε στον φακελο /var/log/bootchart
2) Γιατι εχεις ενεργοποιησει τον κλειστο οδηγο (fglrx), και με ποιον τροπο τον εκανες εγκατασταση?
Νομιζω, μια χαρα πρεπει να δουλευει η καρτα σου με τους ανοιχτους οδηγους στο Lucid.....
3) Επισης, ειναι συμαντικο να μας πεις, τον τροπο εγκαταστασης
4) Δοκιμασε να μπεις και με παλιοτερο πυρηνα (kernel), και δες αν εχεις και εκει το ιδιο προβλημα!
5) Δοκιμασε να απενεργοποιησεις τα εφε(compiz), αν τα εχεις ενεργοποιημενα, και δες αν φτιαξει μετα το προβλημα που εχεις!
κανονικά έκανα την εγκατάσταση.... όσο για την κάρτα γραφικών έχω αυτή που είναι στις οδηγούς υλικού....