Πρόβλημα με το EDID

Kαλησπέρα σας. Σήμερα έβαλα πάλι τα Zorin 9 και έχω ένα προβληματάκι με το EDID.

Δε μου εμφανίζει το μοντέλο της οθόνης για να αλλάξω  την ανάλυση. 

Το τερματικό μου εμφανίζει αυτό το αποτέλεσμα:

This is read-edid version 3.0.1. Prepare for some fun.
Attempting to use i2c interface
Looks like no busses have an EDID. Sorry!
Attempting to use the classical VBE interface

    Performing real mode VBE call
    Interrupt 0x10 ax=0x4f00 bx=0x0 cx=0x0
    Function supported
    Call successful

    VBE version 300
    VBE string at 0x11100 "NVIDIA"

VBE/DDC service about to be called
    Report DDC capabilities

    Performing real mode VBE call
    Interrupt 0x10 ax=0x4f15 bx=0x0 cx=0x0
    Function supported
    Call successful

    Monitor and video card combination does not support DDC1 transfers
    Monitor and video card combination does not support DDC2 transfers
    0 seconds per 128 byte EDID block transfer
    Screen is not blanked during DDC transfer

Reading next EDID block

VBE/DDC service about to be called
    Read EDID

    Performing real mode VBE call
    Interrupt 0x10 ax=0x4f15 bx=0x1 cx=0x0
    Function supported
    Call failed

The EDID data should not be trusted as the VBE call failed
Error: output block unchanged
I'm sorry nothing was successful. Maybe try some other arguments
if you played with them, or send an email to Matthew Kern <[email protected]>.
Partial Read... Try again
crestfallen@crestfallen-desktop:~$ 

Τι λέτε να είναι ακριβώς;