Συνδεση με wireless usb

Lman | Δευ, 07/12/2010 - 12:38 | 2' | 13

Αγορασα εναν καινουριο υπολογιστή και εγκατέστησα σε αυτόν μονο linux και μιας και εχω μονο ασύρματο router αγόρασα εναν ασύρματο usb adapter της digitus αλλα το linux δεν το αναγνλωριζε. Η διανομή που χρησιμοποιώ είναι το Mint. Ύστερα έψαξα στο site της εταιρίας και βρηκα κατί drivers που είχε για win και linux. Ο usb adapter ειναι ο 150Ν USB 2.0 ADAPTER. Το θέμα είναι πως από το zip αρχείο που κατέβασα βρήκα τον υποφάκελο που απευθύνετε στο linux αλλα μέσα περιέχει διάφορα αρχεία και δεν ξέρω πως να εγκαταστήσω τον συγκεκριμένο driver. Μεσα στο φάκελο για το linux έχει ενα Makefile αλλα είμαι καινουριος με αυτά και δεν ξέρω τι να κάνω. Αν μπορεί κάποιος ας με βοηθήσει!

Ευχαριστώ Πολύ!

Φόρουμ
Tags
Δώσε αστέρια!

MO: (ψήφοι: 0)

Σχόλια

Γεια σου Lman.

Δωσε μας μερικες πληροφοριες,εχοντας συνδεδεμενο στην usb θυρα το usb adapter.Πηγαινοντας στο τερματικο και δινοντας lsusb κανε αντιγραφη-επικολληση το αποτελεσμα που θα βγει,για να δουμε πως το βλεπει το συστημα σου.Αυτα προς το παρον και βλεπουμε...

Bus 009 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 1532:0109 Razer USA, Ltd 
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 046d:c048 Logitech, Inc. 
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 0bda:8171 Realtek Semiconductor Corp. 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Αυτά είναι τα αποτελεσματα:

Bus 009 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 1532:0109 Razer USA, Ltd 
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 046d:c048 Logitech, Inc. 
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 0bda:8171 Realtek Semiconductor Corp. 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

 

Η καρτα σου ειναι αυτη

Bus 001 Device 004: ID 0bda:8171 Realtek Semiconductor Corp. 

Δωσε μας και τα αποτελεσματα απο

uname -r

dmesg

iwconfig

lsmod

Επισης η ερωτηση μου ειναι, γιατι δεν επελεξες να αγορασεις μια καρτα που να ειναι συμβατη με το linux,

και επελεξες αυτη?

Μπορεις να χρησιμοποιησεις και τον driver που δινει για windows μεσω του ndiswrapper.Εγκαθιστας το ndiwrapper απο το synaptic και μετα θα το βρεις στο menu->system->preferences.Το τρεχεις και θα σου ζητησει το αρχειο του driver ".inf".Το αντιγραφεις απο το cd στο δισκο και μετα λες στο ndiswrapper που βρισκεται αυτο το αρχειο.Λογικα μολις το βρει με μια επανεκκινηση πρεπει να παιξει το ασυρματο.

Δες και εδω λεπτομερεις οδηγιες.

 

 

 

www.ktmhellasclub.gr

@tek640

To ndiswrapper ειναι τη τελευταια και εσχατη λυση! Δεν ειναι και οτι καλυτερο να το κανει εγκατασταση,

εχει πολλα μειωνεκτηματα, τα οποια θα τα βρει αργοτερα μπροστα του, και μετα δεν θα υπαρχει επιστροφη απεγκαταστασης του,

παρα μονο επανεγκατασταση!

Βασικα είχα αυτή τη κάρτα στο παλίο pc που έτρεχε windows και για αυτό δεν με ενδέφερε τι αγόραζα τοτε οπότε τη πήρα αυτή.

Τα αποτελεσματα είναι

# uname -r
2.6.31-14-generic



# iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.

eth1      no wireless extensions.




# lsmod
Module                	    Size  Used by
nls_iso8859_1         	   3740  0 
nls_cp437              	   5372  0 
vfat                 		  10716  0 
fat                  		  51452  1 vfat
binfmt_misc      		    8356  1 
ppdev                   	    6688  0 
psmouse                	  56180  0 
serio_raw              	    5280  0 
lp                      		    8964  0 
parport                		  35340  2 ppdev,lp
joydev                 		  10272  0 
dm_crypt              	  12928  0 
xhci                   		  35168  0 
snd_hda_codec_atihdmi       3356  1 
snd_hda_codec_realtek     203328  1 
snd_hda_intel        	  26920  2 
snd_hda_codec         	  75708  3 snd_hda_codec_atihdmi,snd_hda_codec_realtek,snd_hda_intel
snd_hwdep              	    7200  1 snd_hda_codec
snd_pcm_oss            	  37920  0 
snd_mixer_oss          	  16028  1 snd_pcm_oss
snd_pcm              	  75296  3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_dummy           	    2656  0 
snd_seq_oss            	  28576  0 
snd_seq_midi          	    6432  0 
snd_rawmidi          	  22208  1 snd_seq_midi
snd_seq_midi_event             6940  2 snd_seq_oss,snd_seq_midi
snd_seq              		  50224  6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer          	                22276  2 snd_pcm,snd_seq
snd_seq_device         	    6920  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd                    		  59204  16 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,
                                            snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,
                                            snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
iptable_filter          	   3100  0 
soundcore               	   7264  1 snd
snd_page_alloc         	   9156  2 snd_hda_intel,snd_pcm
ip_tables            		  11692  1 iptable_filter
x_tables               		  16544  1 ip_tables
dm_raid45             	  84228  0 
xor                   		  15620  1 dm_raid45
usbhid                		  38208  0 
ohci1394               	  29900  0 
ieee1394             		  86596  1 ohci1394
usb_storage          	  52544  0 
r8169                		  32064  0 
mii                   		  5212  1 r8169

  

#dmesg[    1.092589]   alloc kstat_irqs on node -1
[    1.092595] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
[    1.092601] pcieport-driver 0000:00:01.0: setting latency timer to 64
[    1.092686]   alloc irq_desc for 25 on node -1
[    1.092687]   alloc kstat_irqs on node -1
[    1.092691] pcieport-driver 0000:00:02.0: irq 25 for MSI/MSI-X
[    1.092697] pcieport-driver 0000:00:02.0: setting latency timer to 64
[    1.092778]   alloc irq_desc for 26 on node -1
[    1.092779]   alloc kstat_irqs on node -1
[    1.092784] pcieport-driver 0000:00:03.0: irq 26 for MSI/MSI-X
[    1.092789] pcieport-driver 0000:00:03.0: setting latency timer to 64
[    1.092870]   alloc irq_desc for 27 on node -1
[    1.092871]   alloc kstat_irqs on node -1
[    1.092875] pcieport-driver 0000:00:05.0: irq 27 for MSI/MSI-X
[    1.092880] pcieport-driver 0000:00:05.0: setting latency timer to 64
[    1.092962]   alloc irq_desc for 28 on node -1
[    1.092963]   alloc kstat_irqs on node -1
[    1.092967] pcieport-driver 0000:00:07.0: irq 28 for MSI/MSI-X
[    1.092972] pcieport-driver 0000:00:07.0: setting latency timer to 64
[    1.093053]   alloc irq_desc for 29 on node -1
[    1.093054]   alloc kstat_irqs on node -1
[    1.093058] pcieport-driver 0000:00:09.0: irq 29 for MSI/MSI-X
[    1.093064] pcieport-driver 0000:00:09.0: setting latency timer to 64
[    1.093144]   alloc irq_desc for 30 on node -1
[    1.093145]   alloc kstat_irqs on node -1
[    1.093150] pcieport-driver 0000:00:1c.0: irq 30 for MSI/MSI-X
[    1.093156] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[    1.093244]   alloc irq_desc for 31 on node -1
[    1.093245]   alloc kstat_irqs on node -1
[    1.093250] pcieport-driver 0000:00:1c.1: irq 31 for MSI/MSI-X
[    1.093256] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[    1.093342]   alloc irq_desc for 32 on node -1
[    1.093343]   alloc kstat_irqs on node -1
[    1.093348] pcieport-driver 0000:00:1c.3: irq 32 for MSI/MSI-X
[    1.093354] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[    1.093442]   alloc irq_desc for 33 on node -1
[    1.093443]   alloc kstat_irqs on node -1
[    1.093449] pcieport-driver 0000:00:1c.4: irq 33 for MSI/MSI-X
[    1.093455] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[    1.093542]   alloc irq_desc for 34 on node -1
[    1.093543]   alloc kstat_irqs on node -1
[    1.093548] pcieport-driver 0000:00:1c.5: irq 34 for MSI/MSI-X
[    1.093554] pcieport-driver 0000:00:1c.5: setting latency timer to 64
[    1.093617] aer 0000:00:01.0:pcie02: AER service couldn't init device: no _OSC support
[    1.093622] aer 0000:00:02.0:pcie02: AER service couldn't init device: no _OSC support
[    1.093625] aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support
[    1.093628] aer 0000:00:05.0:pcie02: AER service couldn't init device: no _OSC support
[    1.093631] aer 0000:00:07.0:pcie02: AER service couldn't init device: no _OSC support
[    1.093634] aer 0000:00:09.0:pcie02: AER service couldn't init device: no _OSC support
[    1.093640] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.093715] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.093790] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    1.093792] ACPI: Power Button [PWRF]
[    1.093822] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    1.093824] ACPI: Power Button [PWRB]
[    1.094331] processor LNXCPU:00: registered as cooling_device0
[    1.094333] ACPI: Processor [CPU0] (supports 8 throttling states)
[    1.094648] processor LNXCPU:01: registered as cooling_device1
[    1.094650] ACPI: Processor [CPU1] (supports 8 throttling states)
[    1.094979] processor LNXCPU:02: registered as cooling_device2
[    1.094982] ACPI: Processor [CPU2] (supports 8 throttling states)
[    1.095307] processor LNXCPU:03: registered as cooling_device3
[    1.095310] ACPI: Processor [CPU3] (supports 8 throttling states)
[    1.095620] processor LNXCPU:04: registered as cooling_device4
[    1.095622] ACPI: Processor [CPU4] (supports 8 throttling states)
[    1.095929] processor LNXCPU:05: registered as cooling_device5
[    1.095931] ACPI: Processor [CPU5] (supports 8 throttling states)
[    1.096250] processor LNXCPU:06: registered as cooling_device6
[    1.096253] ACPI: Processor [CPU6] (supports 8 throttling states)
[    1.096574] processor LNXCPU:07: registered as cooling_device7
[    1.096576] ACPI: Processor [CPU7] (supports 8 throttling states)
[    1.097745] isapnp: Scanning for PnP cards...
[    1.450366] isapnp: No Plug & Play device found
[    1.450973] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.451687] brd: module loaded
[    1.451931] loop: module loaded
[    1.451967] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[    1.452012] ahci 0000:08:00.0: version 3.0
[    1.452023] ahci 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.464049] ahci 0000:08:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    1.464053] ahci 0000:08:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
[    1.464059] ahci 0000:08:00.0: setting latency timer to 64
[    1.464158] scsi0 : ahci
[    1.464204] scsi1 : ahci
[    1.464246] ata1: SATA max UDMA/133 abar m8192@0xfbdfe000 port 0xfbdfe100 irq 17
[    1.464249] ata2: SATA max UDMA/133 abar m8192@0xfbdfe000 port 0xfbdfe180 irq 17
[    1.464261] ahci 0000:09:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    1.480035] ahci 0000:09:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    1.480038] ahci 0000:09:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
[    1.480044] ahci 0000:09:00.0: setting latency timer to 64
[    1.480137] scsi2 : ahci
[    1.480168] scsi3 : ahci
[    1.480206] ata3: SATA max UDMA/133 abar m8192@0xfbcfe000 port 0xfbcfe100 irq 19
[    1.480209] ata4: SATA max UDMA/133 abar m8192@0xfbcfe000 port 0xfbcfe180 irq 19
[    1.480237] ata_piix 0000:00:1f.2: version 2.13
[    1.480244] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.480248] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    1.480273] ata_piix 0000:00:1f.2: setting latency timer to 64
[    1.480307] scsi4 : ata_piix
[    1.480336] scsi5 : ata_piix
[    1.480731] ata5: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
[    1.480735] ata6: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15
[    1.480752] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.480755] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    1.480778] ata_piix 0000:00:1f.5: setting latency timer to 64
[    1.480802] scsi6 : ata_piix
[    1.480832] scsi7 : ata_piix
[    1.481139] ata7: SATA max UDMA/133 cmd 0xf600 ctl 0xf500 bmdma 0xf200 irq 19
[    1.481142] ata8: SATA max UDMA/133 cmd 0xf400 ctl 0xf300 bmdma 0xf208 irq 19
[    1.481378] pata_jmicron 0000:08:00.1: enabling device (0000 -> 0001)
[    1.481382]   alloc irq_desc for 18 on node -1
[    1.481383]   alloc kstat_irqs on node -1
[    1.481387] pata_jmicron 0000:08:00.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[    1.481405] pata_jmicron 0000:08:00.1: setting latency timer to 64
[    1.481441] scsi8 : pata_jmicron
[    1.481472] scsi9 : pata_jmicron
[    1.481863] ata9: PATA max UDMA/100 cmd 0xcf00 ctl 0xce00 bmdma 0xcb00 irq 18
[    1.481865] ata10: PATA max UDMA/100 cmd 0xcd00 ctl 0xcc00 bmdma 0xcb08 irq 18
[    1.481892] pata_jmicron 0000:09:00.1: enabling device (0000 -> 0001)
[    1.481897] pata_jmicron 0000:09:00.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    1.481919] pata_jmicron 0000:09:00.1: setting latency timer to 64
[    1.481965] scsi10 : pata_jmicron
[    1.481996] scsi11 : pata_jmicron
[    1.482382] ata11: PATA max UDMA/100 cmd 0xbf00 ctl 0xbe00 bmdma 0xbb00 irq 16
[    1.482384] ata12: PATA max UDMA/100 cmd 0xbd00 ctl 0xbc00 bmdma 0xbb08 irq 16
[    1.482559] pata_acpi 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.482571] pata_acpi 0000:01:00.0: setting latency timer to 64
[    1.482578] pata_acpi 0000:01:00.0: PCI INT A disabled
[    1.482730] Fixed MDIO Bus: probed
[    1.482749] PPP generic driver version 2.4.2
[    1.482794] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.482806] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.482813] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    1.482815] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    1.482840] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    1.486747] ehci_hcd 0000:00:1a.7: debug port 1
[    1.486751] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    1.486754] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbffe000
[    1.499985] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    1.500053] usb usb1: configuration #1 chosen from 1 choice
[    1.500085] hub 1-0:1.0: USB hub found
[    1.500089] hub 1-0:1.0: 6 ports detected
[    1.500126]   alloc irq_desc for 23 on node -1
[    1.500128]   alloc kstat_irqs on node -1
[    1.500131] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.500137] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.500140] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.500157] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    1.504063] ehci_hcd 0000:00:1d.7: debug port 1
[    1.504067] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    1.504074] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbffd000
[    1.515967] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.516027] usb usb2: configuration #1 chosen from 1 choice
[    1.516053] hub 2-0:1.0: USB hub found
[    1.516058] hub 2-0:1.0: 6 ports detected
[    1.516099] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.516110] uhci_hcd: USB Universal Host Controller Interface driver
[    1.516123] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.516128] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    1.516130] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    1.516152] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    1.516172] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00
[    1.516215] usb usb3: configuration #1 chosen from 1 choice
[    1.516228] hub 3-0:1.0: USB hub found
[    1.516231] hub 3-0:1.0: 2 ports detected
[    1.516256]   alloc irq_desc for 21 on node -1
[    1.516258]   alloc kstat_irqs on node -1
[    1.516261] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    1.516265] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    1.516267] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    1.516283] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    1.516306] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00
[    1.516346] usb usb4: configuration #1 chosen from 1 choice
[    1.516359] hub 4-0:1.0: USB hub found
[    1.516364] hub 4-0:1.0: 2 ports detected
[    1.516389] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.516393] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    1.516395] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    1.516411] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    1.516430] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000fd00
[    1.516471] usb usb5: configuration #1 chosen from 1 choice
[    1.516484] hub 5-0:1.0: USB hub found
[    1.516487] hub 5-0:1.0: 2 ports detected
[    1.516513] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.516516] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.516519] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.516533] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    1.516552] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00
[    1.516592] usb usb6: configuration #1 chosen from 1 choice
[    1.516606] hub 6-0:1.0: USB hub found
[    1.516608] hub 6-0:1.0: 2 ports detected
[    1.516635] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.516639] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.516641] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.516656] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    1.516675] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00
[    1.516715] usb usb7: configuration #1 chosen from 1 choice
[    1.516729] hub 7-0:1.0: USB hub found
[    1.516732] hub 7-0:1.0: 2 ports detected
[    1.516762] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.516766] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.516768] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.516783] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    1.516803] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00
[    1.516844] usb usb8: configuration #1 chosen from 1 choice
[    1.516859] hub 8-0:1.0: USB hub found
[    1.516862] hub 8-0:1.0: 2 ports detected
[    1.516914] PNP: No PS/2 controller found. Probing ports directly.
[    1.517215] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.517219] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.517255] mice: PS/2 mouse device common for all mice
[    1.517314] rtc_cmos 00:04: RTC can wake from S4
[    1.517331] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    1.517351] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.517407] device-mapper: uevent: version 1.0.3
[    1.517458] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: [email protected]
[    1.517567] device-mapper: multipath: version 1.1.0 loaded
[    1.517568] device-mapper: multipath round-robin: version 1.0.0 loaded
[    1.517633] EISA: Probing bus 0 at eisa.0
[    1.517655] EISA: Detected 0 cards.
[    1.517814] cpuidle: using governor ladder
[    1.517815] cpuidle: using governor menu
[    1.518080] TCP cubic registered
[    1.518167] NET: Registered protocol family 10
[    1.518412] lo: Disabled Privacy Extensions
[    1.518579] NET: Registered protocol family 17
[    1.518588] Bluetooth: L2CAP ver 2.13
[    1.518589] Bluetooth: L2CAP socket layer initialized
[    1.518591] Bluetooth: SCO (Voice Link) ver 0.6
[    1.518592] Bluetooth: SCO socket layer initialized
[    1.518606] Bluetooth: RFCOMM TTY layer initialized
[    1.518608] Bluetooth: RFCOMM socket layer initialized
[    1.518609] Bluetooth: RFCOMM ver 1.11
[    1.519704] Using IPI No-Shortcut mode
[    1.519737] PM: Resume from disk failed.
[    1.519742] registered taskstats version 1
[    1.519860]   Magic number: 2:338:525
[    1.519906] rtc_cmos 00:04: setting system clock to 2010-07-12 09:31:37 UTC (1278927097)
[    1.519908] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.519909] EDD information not available.
[    1.783697] ata2: SATA link down (SStatus 0 SControl 300)
[    1.783729] ata1: SATA link down (SStatus 0 SControl 300)
[    1.799702] ata4: SATA link down (SStatus 0 SControl 300)
[    1.799732] ata3: SATA link down (SStatus 0 SControl 300)
[    1.810357] ata8: SATA link down (SStatus 0 SControl 300)
[    1.821019] ata7: SATA link down (SStatus 0 SControl 300)
[    2.035415] usb 2-5: new high speed USB device using ehci_hcd and address 2
[    2.177366] usb 2-5: configuration #1 chosen from 1 choice
[    2.275207] ata6.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.275220] ata6.01: SATA link down (SStatus 0 SControl 300)
[    2.275392] ata5.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.275407] ata5.01: SATA link down (SStatus 0 SControl 300)
[    2.275417] ata5.01: link offline, clearing class 3 to NONE
[    2.283570] ata5.00: ATAPI: SONY    DVD RW DRU-870S, 1.61, max UDMA/100
[    2.291355] ata6.00: HPA unlocked: 1953516911 -> 1953525168, native 1953525168
[    2.291358] ata6.00: ATA-8: WDC WD10EARS-00Y5B1, 80.00A80, max UDMA/133
[    2.291360] ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.299609] ata5.00: configured for UDMA/100
[    2.307882] scsi 4:0:0:0: CD-ROM            SONY     DVD RW DRU-870S  1.61 PQ: 0 ANSI: 5
[    2.308180] ata6.00: configured for UDMA/133
[    2.312508] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.312511] Uniform CD-ROM driver Revision: 3.20
[    2.312581] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    2.312614] sr 4:0:0:0: Attached scsi generic sg0 type 5
[    2.312673] scsi 5:0:0:0: Direct-Access     ATA      WDC WD10EARS-00Y 80.0 PQ: 0 ANSI: 5
[    2.312734] sd 5:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    2.312739] sd 5:0:0:0: Attached scsi generic sg1 type 0
[    2.312776] sd 5:0:0:0: [sda] Write Protect is off
[    2.312778] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.312790] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.312848]  sda: sda1 sda2
[    2.351384] sd 5:0:0:0: [sda] Attached SCSI disk
[    2.642229] Freeing unused kernel memory: 540k freed
[    2.642363] Write protecting the kernel text: 4568k
[    2.642387] Write protecting the kernel read-only data: 1836k
[    2.709953] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.709967] r8169 0000:0a:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.710001] r8169 0000:0a:00.0: setting latency timer to 64
[    2.710043]   alloc irq_desc for 35 on node -1
[    2.710045]   alloc kstat_irqs on node -1
[    2.710058] r8169 0000:0a:00.0: irq 35 for MSI/MSI-X
[    2.710541] eth0: RTL8168d/8111d at 0xf803a000, 6c:f0:49:5c:d5:35, XID 283000c0 IRQ 35
[    2.714265] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.714280] r8169 0000:0b:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    2.714313] r8169 0000:0b:00.0: setting latency timer to 64
[    2.714356]   alloc irq_desc for 36 on node -1
[    2.714358]   alloc kstat_irqs on node -1
[    2.714371] r8169 0000:0b:00.0: irq 36 for MSI/MSI-X
[    2.714891] eth1: RTL8168d/8111d at 0xf80f4000, 6c:f0:49:5c:d5:54, XID 283000c0 IRQ 36
[    2.718616] Initializing USB Mass Storage driver...
[    2.718770] scsi12 : SCSI emulation for USB Mass Storage devices
[    2.718812] usb-storage: device found at 2
[    2.718813] usb-storage: waiting for device to settle before scanning
[    2.718818] usbcore: registered new interface driver usb-storage
[    2.718820] USB Mass Storage support registered.
[    2.719679] usb 3-1: new full speed USB device using uhci_hcd and address 2
[    2.728627] ohci1394 0000:0c:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    2.782637] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18]  MMIO=[fb6ff000-fb6ff7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[    2.886864] usb 3-1: configuration #1 chosen from 1 choice
[    2.892993] usbcore: registered new interface driver hiddev
[    2.896936] input: Razer Razer Lycosa as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input3
[    2.896966] generic-usb 0003:1532:0109.0001: input,hidraw0: USB HID v1.10 Keyboard [Razer Razer Lycosa] on usb-0000:00:1a.0-1/input0
[    2.901876] input: Razer Razer Lycosa as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.1/input/input4
[    2.901911] generic-usb 0003:1532:0109.0002: input,hidraw1: USB HID v1.10 Device [Razer Razer Lycosa] on usb-0000:00:1a.0-1/input1
[    2.901920] usbcore: registered new interface driver usbhid
[    2.901921] usbhid: v2.6:USB HID core driver
[    3.126239] usb 5-1: new full speed USB device using uhci_hcd and address 2
[    3.316692] usb 5-1: configuration #1 chosen from 1 choice
[    3.326731] input: Logitech G9 Laser Mouse as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input5
[    3.326767] generic-usb 0003:046D:C048.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech G9 Laser Mouse] on usb-0000:00:1a.2-1/input0
[    3.335677] input: Logitech G9 Laser Mouse as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.1/input/input6
[    3.335720] generic-usb 0003:046D:C048.0004: input,hiddev96,hidraw3: USB HID v1.11 Keyboard [Logitech G9 Laser Mouse] on usb-0000:00:1a.2-1/input1
[    3.390712] xor: automatically using best checksumming function: pIII_sse
[    3.409930]    pIII_sse  : 10988.000 MB/sec
[    3.409932] xor: using function: pIII_sse (10988.000 MB/sec)
[    3.411419] device-mapper: dm-raid45: initialized v0.2594b
[    3.598410] PM: Starting manual resume from disk
[    3.598413] PM: Resume from partition 8:2
[    3.598414] PM: Checking hibernation image.
[    3.598567] PM: Resume from disk failed.
[    3.629751] EXT4-fs (sda1): barriers enabled
[    3.642721] kjournald2 starting: pid 460, dev sda1:8, commit interval 5 seconds
[    3.642727] EXT4-fs (sda1): delayed allocation enabled
[    3.642731] EXT4-fs: file extents enabled
[    3.652130] EXT4-fs: mballoc enabled
[    3.652137] EXT4-fs (sda1): mounted filesystem with ordered data mode
[    4.053556] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[005bf804006cf049]
[    4.769701] Adding 7815612k swap on /dev/sda2.  Priority:-1 extents:1 across:7815612k 
[    4.842057] EXT4-fs (sda1): internal journal on sda1:8
[    5.204430] udev: starting version 147
[    7.400942] r8169: eth0: link down
[    7.401074] ADDRCONF(NETDEV_UP): eth0: link is not ready
[    7.515631] r8169: eth1: link down
[    7.515755] ADDRCONF(NETDEV_UP): eth1: link is not ready
[    7.711003] usb-storage: device scan complete
[    7.713354] scsi scan: INQUIRY result too short (5), using 36
[    7.713360] scsi 12:0:0:0: Direct-Access                                    PQ: 0 ANSI: 0
[    7.713664] sd 12:0:0:0: Attached scsi generic sg2 type 0
[    7.717976] sd 12:0:0:0: [sdb] 15523840 512-byte logical blocks: (7.94 GB/7.40 GiB)
[    7.720969] sd 12:0:0:0: [sdb] Write Protect is off
[    7.720973] sd 12:0:0:0: [sdb] Mode Sense: 00 06 00 00
[    7.720975] sd 12:0:0:0: [sdb] Assuming drive cache: write through
[    7.732955] sd 12:0:0:0: [sdb] Assuming drive cache: write through
[    7.732959]  sdb: sdb1
[    7.752436] sd 12:0:0:0: [sdb] Assuming drive cache: write through
[    7.752440] sd 12:0:0:0: [sdb] Attached SCSI removable disk
[   10.156691] ip_tables: (C) 2000-2006 Netfilter Core Team
[   10.621085]   alloc irq_desc for 22 on node -1
[   10.621088]   alloc kstat_irqs on node -1
[   10.621094] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   10.621119] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   10.730689] hda_codec: Unknown model for ALC889, trying auto-probe from BIOS...
[   10.730926] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[   10.734416] HDA Intel 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   10.734429] HDA Intel 0000:03:00.1: setting latency timer to 64
[   10.850730] xhci_hcd 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   10.850744] xhci_hcd 0000:02:00.0: setting latency timer to 64
[   10.850747] xhci_hcd 0000:02:00.0: xHCI Host Controller
[   10.850790] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9
[   10.850892] xhci_hcd 0000:02:00.0: irq 16, io mem 0xfb5fe000
[   10.850920] usb usb9: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
[   10.850978] usb usb9: configuration #1 chosen from 1 choice
[   10.850981] xHCI xhci_add_endpoint called for root hub
[   10.850982] xHCI xhci_check_bandwidth called for root hub
[   10.851010] hub 9-0:1.0: USB hub found
[   10.851015] hub 9-0:1.0: 4 ports detected
[   11.493360] lp: driver loaded but no devices found
[   16.025874] ppdev: user-space parallel port driver
[   17.754497] CPU0 attaching NULL sched-domain.
[   17.754500] CPU1 attaching NULL sched-domain.
[   17.754501] CPU2 attaching NULL sched-domain.
[   17.754502] CPU3 attaching NULL sched-domain.
[   17.754503] CPU4 attaching NULL sched-domain.
[   17.754505] CPU5 attaching NULL sched-domain.
[   17.754506] CPU6 attaching NULL sched-domain.
[   17.754507] CPU7 attaching NULL sched-domain.
[   17.768351] CPU0 attaching sched-domain:
[   17.768353]  domain 0: span 0,4 level SIBLING
[   17.768355]   groups: 0 4
[   17.768358]   domain 1: span 0-7 level MC
[   17.768359]    groups: 0,4 (__cpu_power = 2048) 1,5 (__cpu_power = 2048) 2,6 (__cpu_power = 2048) 3,7 (__cpu_power = 2048)
[   17.768365] CPU1 attaching sched-domain:
[   17.768366]  domain 0: span 1,5 level SIBLING
[   17.768367]   groups: 1 5
[   17.768369]   domain 1: span 0-7 level MC
[   17.768370]    groups: 1,5 (__cpu_power = 2048) 2,6 (__cpu_power = 2048) 3,7 (__cpu_power = 2048) 0,4 (__cpu_power = 2048)
[   17.768376] CPU2 attaching sched-domain:
[   17.768377]  domain 0: span 2,6 level SIBLING
[   17.768378]   groups: 2 6
[   17.768380]   domain 1: span 0-7 level MC
[   17.768381]    groups: 2,6 (__cpu_power = 2048) 3,7 (__cpu_power = 2048) 0,4 (__cpu_power = 2048) 1,5 (__cpu_power = 2048)
[   17.768387] CPU3 attaching sched-domain:
[   17.768388]  domain 0: span 3,7 level SIBLING
[   17.768389]   groups: 3 7
[   17.768391]   domain 1: span 0-7 level MC
[   17.768392]    groups: 3,7 (__cpu_power = 2048) 0,4 (__cpu_power = 2048) 1,5 (__cpu_power = 2048) 2,6 (__cpu_power = 2048)
[   17.768398] CPU4 attaching sched-domain:
[   17.768399]  domain 0: span 0,4 level SIBLING
[   17.768400]   groups: 4 0
[   17.768402]   domain 1: span 0-7 level MC
[   17.768403]    groups: 0,4 (__cpu_power = 2048) 1,5 (__cpu_power = 2048) 2,6 (__cpu_power = 2048) 3,7 (__cpu_power = 2048)
[   17.768408] CPU5 attaching sched-domain:
[   17.768410]  domain 0: span 1,5 level SIBLING
[   17.768411]   groups: 5 1
[   17.768413]   domain 1: span 0-7 level MC
[   17.768414]    groups: 1,5 (__cpu_power = 2048) 2,6 (__cpu_power = 2048) 3,7 (__cpu_power = 2048) 0,4 (__cpu_power = 2048)
[   17.768419] CPU6 attaching sched-domain:
[   17.768421]  domain 0: span 2,6 level SIBLING
[   17.768422]   groups: 6 2
[   17.768424]   domain 1: span 0-7 level MC
[   17.768425]    groups: 2,6 (__cpu_power = 2048) 3,7 (__cpu_power = 2048) 0,4 (__cpu_power = 2048) 1,5 (__cpu_power = 2048)
[   17.768430] CPU7 attaching sched-domain:
[   17.768431]  domain 0: span 3,7 level SIBLING
[   17.768433]   groups: 7 3
[   17.768435]   domain 1: span 0-7 level MC
[   17.768436]    groups: 3,7 (__cpu_power = 2048) 0,4 (__cpu_power = 2048) 1,5 (__cpu_power = 2048) 2,6 (__cpu_power = 2048)
[   18.522753] CPU0 attaching NULL sched-domain.
[   18.522757] CPU1 attaching NULL sched-domain.
[   18.522760] CPU2 attaching NULL sched-domain.
[   18.522761] CPU3 attaching NULL sched-domain.
[   18.522763] CPU4 attaching NULL sched-domain.
[   18.522765] CPU5 attaching NULL sched-domain.
[   18.522767] CPU6 attaching NULL sched-domain.
[   18.522769] CPU7 attaching NULL sched-domain.
[   18.538785] CPU0 attaching sched-domain:
[   18.538788]  domain 0: span 0,4 level SIBLING
[   18.538790]   groups: 0 4
[   18.538794]   domain 1: span 0-7 level MC
[   18.538796]    groups: 0,4 1,5 2,6 3,7
[   18.538802] CPU1 attaching sched-domain:
[   18.538804]  domain 0: span 1,5 level SIBLING
[   18.538806]   groups: 1 5
[   18.538810]   domain 1: span 0-7 level MC
[   18.538812]    groups: 1,5 2,6 3,7 0,4
[   18.538817] CPU2 attaching sched-domain:
[   18.538819]  domain 0: span 2,6 level SIBLING
[   18.538821]   groups: 2 6
[   18.538824]   domain 1: span 0-7 level MC
[   18.538826]    groups: 2,6 3,7 0,4 1,5
[   18.538831] CPU3 attaching sched-domain:
[   18.538833]  domain 0: span 3,7 level SIBLING
[   18.538835]   groups: 3 7
[   18.538838]   domain 1: span 0-7 level MC
[   18.538841]    groups: 3,7 0,4 1,5 2,6
[   18.538846] CPU4 attaching sched-domain:
[   18.538847]  domain 0: span 0,4 level SIBLING
[   18.538850]   groups: 4 0
[   18.538853]   domain 1: span 0-7 level MC
[   18.538855]    groups: 0,4 1,5 2,6 3,7
[   18.538860] CPU5 attaching sched-domain:
[   18.538862]  domain 0: span 1,5 level SIBLING
[   18.538864]   groups: 5 1
[   18.538867]   domain 1: span 0-7 level MC
[   18.538869]    groups: 1,5 2,6 3,7 0,4
[   18.538874] CPU6 attaching sched-domain:
[   18.538876]  domain 0: span 2,6 level SIBLING
[   18.538878]   groups: 6 2
[   18.538881]   domain 1: span 0-7 level MC
[   18.538883]    groups: 2,6 3,7 0,4 1,5
[   18.538888] CPU7 attaching sched-domain:
[   18.538890]  domain 0: span 3,7 level SIBLING
[   18.538892]   groups: 7 3
[   18.538896]   domain 1: span 0-7 level MC
[   18.538898]    groups: 3,7 0,4 1,5 2,6
[   20.419616] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[   48.066043] usb 2-5: USB disconnect, address 2
[   48.066212] FAT: bread failed in fat_clusters_flush
[   48.066433] FAT: bread failed in fat_clusters_flush
[   48.107495] FAT: bread failed in fat_clusters_flush
[   48.107505] FAT: bread failed in fat_clusters_flush
[   48.107510] FAT: bread failed in fat_clusters_flush
[ 8179.251626] usb 7-2: new full speed USB device using uhci_hcd and address 2
[ 8180.193782] usb 7-2: configuration #1 chosen from 1 choice
[ 8180.201801] scsi13 : SCSI emulation for USB Mass Storage devices
[ 8180.201904] usb-storage: device found at 2
[ 8180.201907] usb-storage: waiting for device to settle before scanning
[ 8185.194674] usb-storage: device scan complete
[ 8185.197667] scsi 13:0:0:0: Direct-Access     SigmaTel MSCN             0100 PQ: 0 ANSI: 4
[ 8185.198033] sd 13:0:0:0: Attached scsi generic sg2 type 0
[ 8185.208645] sd 13:0:0:0: [sdb] 485760 2048-byte logical blocks: (994 MB/948 MiB)
[ 8185.211639] sd 13:0:0:0: [sdb] Write Protect is off
[ 8185.211642] sd 13:0:0:0: [sdb] Mode Sense: 3e 00 00 00
[ 8185.211645] sd 13:0:0:0: [sdb] Assuming drive cache: write through
[ 8185.220630] sd 13:0:0:0: [sdb] 485760 2048-byte logical blocks: (994 MB/948 MiB)
[ 8185.223626] sd 13:0:0:0: [sdb] Assuming drive cache: write through
[ 8185.223630]  sdb: sdb1
[ 8185.236615] sd 13:0:0:0: [sdb] 485760 2048-byte logical blocks: (994 MB/948 MiB)
[ 8185.241606] sd 13:0:0:0: [sdb] Assuming drive cache: write through
[ 8185.241610] sd 13:0:0:0: [sdb] Attached SCSI removable disk
[ 8276.595370] usb 7-2: USB disconnect, address 2
[ 8458.632343] usb 1-3: new high speed USB device using ehci_hcd and address 4
[ 8458.766710] usb 1-3: configuration #1 chosen from 1 choice
[ 9906.081771] usb 7-2: new full speed USB device using uhci_hcd and address 3
[ 9907.023928] usb 7-2: configuration #1 chosen from 1 choice
[ 9907.031944] scsi14 : SCSI emulation for USB Mass Storage devices
[ 9907.032045] usb-storage: device found at 3
[ 9907.032048] usb-storage: waiting for device to settle before scanning
[ 9912.026827] usb-storage: device scan complete
[ 9912.029816] scsi 14:0:0:0: Direct-Access     SigmaTel MSCN             0100 PQ: 0 ANSI: 4
[ 9912.030239] sd 14:0:0:0: Attached scsi generic sg2 type 0
[ 9912.039790] sd 14:0:0:0: [sdb] 485760 2048-byte logical blocks: (994 MB/948 MiB)
[ 9912.042781] sd 14:0:0:0: [sdb] Write Protect is off
[ 9912.042784] sd 14:0:0:0: [sdb] Mode Sense: 3e 00 00 00
[ 9912.042787] sd 14:0:0:0: [sdb] Assuming drive cache: write through
[ 9912.051774] sd 14:0:0:0: [sdb] 485760 2048-byte logical blocks: (994 MB/948 MiB)
[ 9912.054768] sd 14:0:0:0: [sdb] Assuming drive cache: write through
[ 9912.054772]  sdb: sdb1
[ 9912.067754] sd 14:0:0:0: [sdb] 485760 2048-byte logical blocks: (994 MB/948 MiB)
[ 9912.072747] sd 14:0:0:0: [sdb] Assuming drive cache: write through
[ 9912.072749] sd 14:0:0:0: [sdb] Attached SCSI removable disk
[ 9949.051764] usb 7-2: USB disconnect, address 3

 

 

 

Στην σελιδα της εταιρίας εχω βρει driver για linux αλλά δεν καταλαβαίνω πως να τον εγκαταστησω. Δεν μπορώ να καταλάβω τι μου λέει στο Readme.

To link για την σελιδα του usb :

http://www.digitus.info/en/products/network/?c=10101&p=17231

Και για τον driver:

http://www.digitus.info/digitus-data/treiber/support-driver-1/DN-7043-3_W2K_XP3264_VISTA3264_Win73264_Lin242x-26x.zip

Ενημερωτικα παντως να γνωριζεις οτι για το προβλημα που εχει, σιγουρα δεν φταις εσυ,

αλλα ουτε και η διανομη που εχεις, και το linux γενικοτερα!

Το ολο φταιξιμο ειναι της εταιριας οπου δεν υποστηριζει το ελευθερο λογισμικο ανοιχτου κωδικα, Linux!

Αυτα απλα ενημερωτικα!

 

Δες εδω http://ubuntu-ky.ubuntuforums.org/showthread.php?p=9472740#6

αυτη ειναι λυση για το Ubuntu 10.04 με πυρηνα 2.6.32, εσυ εχεις παλιοτερο πυρηνα!

Δεν ξερω αν θα φτιαξει μετα απο αυτο, δοκιμασε μπας και δουλεψει και σε εσενα,

και βλεπουμε, δεν νομιζω να δημιουργηθει καποιο προβλημα, αλλα αν υπαρξει ποσταρε το να φτιαξουμε!

Καλου-κακου, παντα εχουμε κρατησει ενα backup τα σημαντικα αρχεια που εχουμε, οταν πειραζουμε αρχεια απο το συστημα μας!

Εδωσα:

# echo 'install r8192s_usb modprobe --ignore-install r8192s_usb;/bin echo "Obda 8171" > /sys/bus/usb/drivers/rt1819xU/new_id' | sudo tee /etc/modprobe.d/r8192s_usb.conf
install r8192s_usb modprobe --ignore-install r8192s_usb;/bin/echo "Obda 8171" > /sys/bus/usb/drivers/rt1819xU/new_id

# sudo ln -s /lib/firmware/RTL8192SE /lib/firmware/RTL8192SU

# sudo modprobe -rf r8192s_usb

# sudo modprobe r8192s_usb

 

Και σαν αποτέλεσμα πήρα:

sh: cannot create /sys/bus/usb/drivers/rt1819xU/new_id: Directory nonexistent
FATAL: Error running install command for r8192s_usb

 

Μήπως πρέπει να αλλάξω κάποια πό τις παραμέτρους που δίνω στις εντολές? Η εταιρία πάντος, από ότι κατάλαβα δίνει έναν driver για linux αλλά δεν ξέρω πως να τον εγκαταστήσω διότι δεν καταλαβαίνω τι ζητάει να κάνουμε στο Readme αρχείο που έχει.

Μπορείς να το ποστάρεις να δούμε τι λέει;

------------------------------------------------------------------------------------------------

"Όταν βλέπεις τον πιγκουίνο, ξέρεις τι πρέπει να κάνεις": ΒΑΖΕΙΣ LINUX!

Εκτελεσε τις παρακατω 4 εντολες μια-μια (αντιγραφη-επικολληση για να μην κανεις λαθος)

echo 'install r8192s_usb modprobe --ignore-install r8192s_usb ; /bin/echo "0bda 8171" > /sys/bus/usb/drivers/rtl819xU/new_id' | sudo tee /etc/modprobe.d/r8192s_usb.conf
sudo ln -s /lib/firmware/RTL8192SE /lib/firmware/RTL8192SU
sudo modprobe -rf r8192s_usb
sudo modprobe r8192s_usb

Εδω ειναι το readme.txt του driver.Tον κατεβασα και γω για να δω τι λεει.

 

 

 

www.ktmhellasclub.gr